Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008516A0000 ABB PTVS1052 Pre-Cut Vertical Lateral Segregation Panel 1000 x 500 mm
ABB PTVS1052 (1STQ008516A0000) is a pre-cut vertical lateral segregation panel for System pro E power low-voltage switchboards, designed for 1000 mm high and 500 mm deep structures incorporating rear and intermediate uprights.
£80.14
Why Choose the ABB PTVS1052 Vertical Lateral Segregation Panel?
The ABB PTVS1052, manufacturer order code 1STQ008516A0000, is a purpose-designed vertical lateral segregation panel for low-voltage electrical distribution switchboards. Part of the ABB System pro E power series, this internal partition is designed for switchboard configurations incorporating a rear upright and an intermediate upright, providing physical separation between adjacent functional areas within compatible electrical distribution assemblies.
Developed for professional electrical panel builders, switchboard manufacturers and industrial electrical contractors, the PTVS1052 supports structured internal compartmentalisation within modular low-voltage distribution systems. Its rear and intermediate upright mounting configuration distinguishes it from segregation panels intended for structures without intermediate uprights, making it suitable for specific System pro E power assembly layouts.
Designed for a nominal switchboard height of 1000 mm and depth of 500 mm, the PTVS1052 features a pre-cut construction that supports adaptation during installation. This combination of vertical segregation, defined structural compatibility and modular design makes it a practical component for industrial power distribution, commercial electrical switchboards and engineered low-voltage installations.
Key Advantages
- Purpose-designed vertical lateral segregation panel for ABB System pro E power switchboards.
- Provides physical separation between adjacent internal switchboard areas.
- Specifically configured for structures incorporating rear and intermediate uprights.
- 1000 mm nominal height for compatible switchboard sections.
- 500 mm nominal depth for corresponding electrical enclosure structures.
- Pre-cut panel construction supports adaptation to the required installation arrangement.
- Helps establish organised internal compartment layouts.
- Supports professional electrical panel construction and modular switchboard assembly.
- Suitable for industrial and commercial low-voltage power distribution applications.
- Designed for integration with the ABB System pro E power modular switchboard platform.
Key Features
- ABB System pro E power internal segregation accessory.
- PTVS1052 manufacturer type designation.
- 1STQ008516A0000 ABB order code.
- Pre-cut vertical lateral segregation panel for electrical switchboards.
- Designed for installation between rear and intermediate structural uprights.
- 1000 mm nominal switchboard height.
- 500 mm nominal switchboard depth.
- Vertical installation orientation within compatible switchboard structures.
- Pre-cut arrangement facilitates adaptation to the required internal partition layout.
- Supports separation between adjacent functional areas within electrical distribution assemblies.
- Suitable for switchboard configurations incorporating an intermediate structural upright.
- Designed for professional low-voltage switchboard construction.
- Compatible with the ABB System pro E power enclosure and distribution assembly system.
Reliable Vertical Segregation for Electrical Distribution Switchboards
The ABB PTVS1052 is designed to provide vertical lateral separation within compatible System pro E power switchboard structures. Internal segregation panels help establish physical boundaries between functional areas of electrical distribution assemblies, supporting organised equipment positioning, structured compartment layouts and the implementation of the required internal separation arrangement.
Unlike vertical segregation panels designed for structures without intermediate uprights, the PTVS1052 is configured for installation between a rear upright and an intermediate upright. This mounting arrangement makes it suitable for switchboard assemblies where the internal structural framework includes an intermediate supporting member. Its nominal 1000 mm height and 500 mm depth correspond to the intended System pro E power enclosure configuration.
The pre-cut construction allows the segregation panel to be adapted during assembly according to the required internal partition arrangement. Any removal or modification of pre-cut sections should follow the applicable ABB installation instructions, taking account of equipment clearances, cable routing and the intended separation between switchboard compartments.
As part of the ABB System pro E power modular switchboard system, the PTVS1052 supports consistent panel construction and internal compartmentalisation. The final form of internal separation, enclosure protection rating and electrical performance depend on the complete switchboard configuration, including structural components, busbars, protective devices and associated partitions. The PTVS1052 is an internal mechanical segregation accessory and does not independently provide electrical switching or circuit protection.
Typical Applications
- ABB System pro E power low-voltage electrical switchboards.
- Vertical lateral compartment segregation in power distribution assemblies.
- Industrial electrical distribution and protection systems.
- Commercial building electrical switchboards.
- Switchboard structures incorporating rear and intermediate uprights.
- Internal separation of adjacent functional areas within electrical enclosures.
- Modular switchboard construction and compartmentalisation.
- Electrical panel manufacturing and switchboard refurbishment projects.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Series | System pro E power Segregation Accessories |
| Model / type | PTVS1052 |
| ABB order code | 1STQ008516A0000 |
| Product type | Vertical lateral segregation panel |
| Component category | Internal switchboard partition / segregation accessory |
| Segregation configuration | Pre-cut vertical lateral partition |
| Nominal switchboard height | 1000 mm |
| Nominal switchboard depth | 500 mm |
| Panel configuration | Pre-cut |
| Installation orientation | Vertical |
| Mounting application | Internal lateral compartment segregation |
| Mounting position | Between rear and intermediate structural uprights |
| Intermediate upright requirement | Required |
| Rear upright configuration | Required |
| Compatible enclosure system | ABB System pro E power |
| Application | Internal segregation of low-voltage electrical distribution switchboards |
Frequently Asked Questions
What is the ABB PTVS1052 used for?
The ABB PTVS1052 is a pre-cut vertical lateral segregation panel used to provide internal separation between adjacent functional areas within compatible ABB System pro E power low-voltage electrical switchboards.
What are the dimensions of the ABB PTVS1052?
The PTVS1052 is designed for a nominal switchboard height of 1000 mm and depth of 500 mm. These dimensions identify the compatible enclosure configuration rather than necessarily representing the exact external dimensions of the partition itself.
Does the PTVS1052 require an intermediate upright?
Yes. The PTVS1052 is specifically designed for switchboard structures incorporating rear and intermediate uprights. Its mounting configuration is intended for installation between these structural members.
What is the purpose of the pre-cut configuration?
The pre-cut panel configuration allows the vertical segregation partition to be adapted during installation according to the required switchboard arrangement. Any alterations should follow ABB's applicable assembly instructions to preserve the intended internal separation and mechanical installation.
What is the difference between the ABB PTVS1052 and PTVS1030?
Both products are vertical lateral segregation panels for ABB System pro E power switchboards with a nominal height of 1000 mm. The PTVS1052 is designed for a 500 mm deep structure incorporating rear and intermediate uprights, whereas the PTVS1030 is intended for a 300 mm deep structure without an intermediate upright.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power segregation accessories support electrical engineers, industrial contractors and switchboard manufacturers in constructing organised and dependable low-voltage distribution assemblies. The PTVS1052 provides a dedicated pre-cut vertical lateral partition for 1000 mm high, 500 mm deep switchboard configurations incorporating rear and intermediate uprights, helping achieve consistent internal compartment separation and professional electrical panel construction.
