Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTVS8052 is a System pro E power rear-side vertical lateral segregation accessory for compatible 800 mm high and 500 mm deep low-voltage switchboard configurations with intermediate uprights and a PRE-C designation.
£66.75
The ABB PTVS8052, order code 1STQ008515A0000, is a specialised rear-side vertical lateral segregation accessory designed for the ABB System pro E power low-voltage switchboard system. This component is specified for an 800 mm height and 500 mm depth, with a configuration incorporating intermediate uprights and the manufacturer's additional PRE-C designation.
As part of ABB's modular System pro E power range, the PTVS8052 supports the construction of compartmentalised electrical distribution assemblies where organised equipment positioning and physical separation between designated internal areas are required. Its vertical lateral arrangement is intended for compatible rear-side segregation configurations, helping electrical panel builders establish defined boundaries within switchboard structures.
The manufacturer's description, SEGR.V.LAT.REAR+INT.UP.H800 D500+PRE-C., identifies a vertical lateral segregation component featuring a rear-side installation arrangement, compatibility with intermediate uprights, a nominal height of 800 mm, a depth of 500 mm and the additional PRE-C configuration. These characteristics distinguish the PTVS8052 from segregation accessories designed for front-side installations, structures without intermediate uprights or alternative dimensional arrangements.
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards used in industrial facilities, commercial buildings and infrastructure installations. Internal segregation accessories such as the PTVS8052 contribute to the physical organisation of electrical equipment by helping panel builders establish designated compartments and separation boundaries.
The ABB PTVS8052 is specifically configured for rear-side vertical lateral segregation in a compatible switchboard arrangement measuring 800 mm high and 500 mm deep. Its dimensions must correspond to the selected enclosure structure, adjacent internal components and intended segregation layout.
A defining characteristic of the PTVS8052 is its compatibility with intermediate uprights. These structural members are used in certain modular switchboard arrangements to support internal layouts and equipment positioning. The PTVS8052 is specified for an installation incorporating intermediate uprights and should not automatically be substituted for segregation accessories intended for structures without them.
The rear-side designation identifies the intended installation arrangement within the switchboard. Correct positioning is important because front-side and rear-side segregation components may differ in their mounting interfaces and compatibility with adjacent structural members. The PTVS8052 should therefore be selected according to the corresponding ABB assembly configuration.
The manufacturer's PRE-C designation identifies an additional configuration requirement for this product. Its precise application should be confirmed using the relevant ABB System pro E power technical documentation rather than assuming compatibility with other segregation variants that do not carry the same designation.
The PTVS8052 is an individual segregation accessory, not a complete compartment or standalone electrical protective device. Where a particular form of internal separation is required, the finished switchboard must be designed and verified according to the applicable requirements of BS EN IEC 61439. Installing this component alone does not establish a specific form of separation, ingress protection rating or electrical performance.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ008515A0000 |
| Product group | System Pro E Power |
| Product type | Vertical lateral segregation accessory |
| Segregation orientation | Vertical |
| Segregation arrangement | Lateral |
| Installation position | Rear-side configuration |
| Intermediate upright configuration | With intermediate uprights |
| Specified height | 800 mm |
| Specified depth | 500 mm |
| Nominal height × depth | 800 mm × 500 mm |
| Additional configuration designation | PRE-C |
| Manufacturer description | SEGR.V.LAT.REAR+INT.UP.H800 D500+PRE-C. |
| Installation application | Internal switchboard segregation |
| System compatibility | ABB System pro E power |
| Equipment application | Low-voltage electrical distribution assemblies |
The ABB PTVS8052 is a rear-side vertical lateral segregation accessory designed for compatible ABB System pro E power low-voltage switchboards. It supports internal physical separation in configurations incorporating intermediate uprights.
The PTVS8052 is specified for a nominal height of 800 mm and depth of 500 mm. These dimensions should be matched to the corresponding ABB System pro E power switchboard structure.
The designation identifies a rear-side vertical lateral segregation arrangement intended for compatible switchboard structures incorporating intermediate uprights. It distinguishes the PTVS8052 from accessories designed for other mounting positions or structural configurations.
PRE-C is an additional manufacturer configuration designation included in the ABB product description. Its precise application and associated installation requirements should be confirmed using the relevant ABB System pro E power technical documentation.
No. The PTVS8052 is an individual segregation accessory. The finished switchboard's form of internal separation depends on the complete arrangement of compatible barriers, partitions, supports and other components, together with the applicable assembly verification requirements.
ABB System pro E power accessories support the construction of modular low-voltage electrical switchboards with organised internal layouts. The ABB PTVS8052 provides a dedicated rear-side vertical lateral segregation solution for compatible 800 mm high and 500 mm deep configurations with intermediate uprights and the specified PRE-C arrangement, helping electrical panel builders integrate system-specific separation components into professional electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.