Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008513A0000 ABB PTBS8001 System pro E Power Vertical Lateral and Front Blind Segregation Kit 800 mm
ABB PTBS8001 (1STQ008513A0000) is a System pro E Power vertical lateral and front blind segregation kit with intermediate upright, designed for 800 mm high internal separation arrangements in compatible low-voltage switchboards.
£37.78
Why Choose the ABB PTBS8001 System pro E Power Vertical Lateral and Front Blind Segregation Kit?
The ABB PTBS8001 (1STQ008513A0000) is a dedicated vertical lateral and front blind segregation kit designed for ABB System pro E Power low-voltage distribution switchboards. Featuring an 800 mm nominal height and a configuration incorporating an intermediate upright, this accessory supports physical separation between selected internal areas of modular electrical distribution assemblies.
As part of the ABB System pro E Power segregation accessory range, the PTBS8001 provides a practical solution for switchboard compartmentalisation. Its blind configuration is intended for segregation arrangements requiring a closed partition section rather than a pre-cut opening, helping electrical panel builders establish defined boundaries between internal equipment and distribution areas.
With an 800 mm nominal segregation height, the PTBS8001 is designed for compatible System pro E Power structures incorporating an intermediate upright. Its vertical lateral and front arrangement supports organised internal layouts in industrial and commercial switchboards, contributing to consistent modular assembly and separation of electrical equipment compartments.
Key Advantages
- Dedicated vertical lateral and front segregation kit for ABB System pro E Power switchboards.
- 800 mm nominal height for compatible internal compartment arrangements.
- Blind partition configuration provides a closed segregation section.
- Designed for switchboard structures incorporating an intermediate upright.
- Supports physical separation between selected electrical distribution compartments.
- Helps establish organised internal switchboard layouts.
- Compatible with the modular ABB System pro E Power enclosure concept.
- Suitable for industrial and commercial low-voltage distribution assemblies.
Key Features
- ABB System pro E Power segregation accessory.
- Manufacturer model: PTBS8001.
- ABB order code: 1STQ008513A0000.
- Vertical lateral and front segregation arrangement.
- 800 mm nominal segregation height.
- Blind configuration for closed partition applications.
- Designed for use with an intermediate upright.
- Supports internal physical separation within modular switchboards.
- Suitable for coordinated electrical equipment compartmentalisation.
- Designed for integration with compatible System pro E Power structural components.
- Intended for professional electrical panel building and switchboard assembly.
Reliable Blind Segregation for Modular Electrical Switchboards
The ABB PTBS8001 provides a dedicated vertical segregation arrangement for compatible System pro E Power switchboards. Blind segregation components help establish physical boundaries between selected internal compartments without incorporating the pre-cut openings associated with alternative partition configurations. This supports organised equipment layouts and the separation of designated electrical distribution areas.
The 800 mm high vertical lateral and front arrangement is intended for switchboard structures incorporating an intermediate upright. When combined with the appropriate ABB framework, mounting accessories and complementary segregation components, the PTBS8001 contributes to a coordinated internal separation system. The final form of separation and electrical safety performance depend on the complete switchboard design, installation and applicable assembly verification requirements.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Vertical lateral and front compartment segregation.
- Main electrical distribution panels.
- Industrial switchgear and power distribution assemblies.
- Commercial building electrical switchboards.
- Switchboards incorporating intermediate structural uprights.
- Closed internal partition arrangements.
- Modular electrical enclosure compartmentalisation.
- Professional switchboard manufacturing and electrical panel building.
Technical Specifications
| Series | System pro E Power |
|---|---|
| Product SKU | 1STQ008513A0000 |
| ABB order code | 1STQ008513A0000 |
| Product group | System Pro E Power |
| Product type | Vertical lateral and front segregation kit |
| Accessory category | Switchboard internal segregation and partition accessories |
| Nominal height | 800 mm |
| Installation orientation | Vertical |
| Segregation position | Lateral and front |
| Structural configuration | With intermediate upright |
| Partition configuration | Blind |
| Compatible enclosure system | ABB System pro E Power |
| Application | Internal vertical segregation of low-voltage switchboards |
Frequently Asked Questions
What is the ABB PTBS8001 used for?
The ABB PTBS8001 is a vertical lateral and front blind segregation kit used to provide physical separation between selected internal areas of compatible ABB System pro E Power low-voltage switchboards.
What is the nominal height of the ABB PTBS8001?
The PTBS8001 has a nominal segregation height of 800 mm and is intended for matching System pro E Power switchboard configurations.
What does the blind configuration mean?
The blind configuration identifies a closed segregation partition arrangement rather than a pre-cut version. It is suitable for compatible switchboard layouts requiring a continuous partition section.
Is the PTBS8001 designed for structures with intermediate uprights?
Yes. The PTBS8001 is specifically designed for vertical lateral and front segregation arrangements incorporating an intermediate upright.
Does the ABB PTBS8001 provide horizontal or vertical segregation?
The PTBS8001 is a vertical lateral and front segregation kit. Horizontal segregation arrangements require the appropriate complementary ABB components.
Does the PTBS8001 provide electrical circuit protection?
No. The PTBS8001 is a mechanical segregation accessory and does not independently provide overload or short-circuit protection. Electrical protection must be provided by appropriately selected protective devices.
Is the ABB PTBS8001 compatible with System pro E Power switchboards?
Yes. The PTBS8001 (1STQ008513A0000) belongs to the ABB System pro E Power range and is intended for compatible modular low-voltage distribution switchboard structures.
Can the PTBS8001 independently establish a specific form of internal separation?
No. The achieved form of internal separation depends on the complete switchboard assembly, including complementary partitions, structural components, equipment arrangements and applicable verification requirements.
Trusted by Electrical Panel Builders and Power Distribution Engineers
ABB System pro E Power segregation accessories support professional electrical panel builders, switchboard manufacturers and industrial power distribution specialists in developing organised low-voltage distribution assemblies. The PTBS8001 provides a dedicated 800 mm high vertical lateral and front blind segregation arrangement for compatible switchboard structures incorporating an intermediate upright.
