Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008511A0000 ABB PTVS8001 Vertical Lateral Front and Upper Internal Segregation Accessory H800
ABB PTVS8001 (1STQ008511A0000) is a System Pro E Power vertical lateral segregation accessory incorporating front and upper internal segregation provisions, specified for an 800 mm nominal-height configuration in compatible low-voltage switchgear assemblies.
£60.34
Why Choose the ABB PTVS8001 Vertical Lateral Segregation Kit?
The ABB PTVS8001 (1STQ008511A0000) is a dedicated vertical lateral segregation accessory designed for compatible ABB System Pro E Power low-voltage electrical distribution assemblies. Specified with an 800 mm nominal height, the accessory is intended for internal switchgear separation arrangements incorporating front and upper internal segregation provisions.
As part of the ABB System Pro E Power product range, the PTVS8001 supports the construction of organised internal compartment layouts within modular switchgear cabinets. Its vertical lateral configuration helps establish physical separation between designated switchgear areas, while the manufacturer's front and upper internal designation identifies the intended segregation arrangement.
The manufacturer description SEGR.VER.LAT.FRONT.+INT.UP.H800+PRE-C. also includes a PRE-C. designation. This abbreviation is retained as supplied because its precise meaning is not established by the product description alone. Combining its 800 mm height specification with its designated front and upper internal segregation arrangement, the ABB PTVS8001 is suitable for professional panel builders selecting compatible System Pro E Power partitioning components.
Key Advantages
- Dedicated vertical lateral segregation accessory for ABB System Pro E Power switchgear.
- 800 mm nominal height for the specified internal segregation arrangement.
- Front segregation provision supports physical separation of designated switchgear areas.
- Upper internal segregation configuration supports the specified compartment layout.
- Vertical lateral arrangement helps organise internal partitioning within modular assemblies.
- Designed for integration with ABB System Pro E Power enclosure and segregation components.
- Supports the planning of defined physical boundaries between electrical equipment areas.
- Suitable for professional low-voltage switchboard construction and panel building.
- ABB order code 1STQ008511A0000 enables accurate identification and procurement.
Key Features
- ABB System Pro E Power internal segregation accessory.
- PTVS8001 manufacturer product designation.
- 1STQ008511A0000 ABB order code.
- Vertical lateral segregation configuration.
- Front segregation designation.
- Upper internal segregation designation.
- 800 mm nominal height specification.
- PRE-C. manufacturer configuration designation.
- Designed for compatible modular low-voltage electrical distribution assemblies.
- Supports professional switchgear compartment planning and internal separation.
Front and Upper Internal Segregation for ABB System Pro E Power Switchgear
Internal segregation is an important consideration in the design of low-voltage electrical distribution assemblies. The ABB PTVS8001 is specified for a vertical lateral segregation arrangement incorporating front and upper internal provisions. Its 800 mm nominal height identifies the intended installation configuration within a compatible ABB System Pro E Power modular switchgear structure.
The PTVS8001 is relevant to switchboard layouts where designated equipment areas require physical separation using compatible internal partitioning components. The manufacturer's FRONT.+INT.UP. description indicates the intended front and upper internal configuration, but does not independently establish the precise number of panels, their individual dimensions or the complete mounting arrangement. Similarly, the PRE-C. abbreviation should be confirmed against ABB technical documentation before it is used to determine assembly requirements.
ABB System Pro E Power supports modular low-voltage switchboard construction, including assemblies designed and verified against applicable IEC 61439 requirements. However, installing the PTVS8001 alone does not establish a particular internal separation form, ingress protection rating, arc-fault performance or completed assembly compliance. These characteristics depend on the complete switchgear design, adjoining components, installation arrangements and verification. Panel builders should confirm the required segregation layout and product compatibility using the applicable ABB documentation.
Typical Applications
- ABB System Pro E Power modular low-voltage switchgear assemblies.
- Internal compartment segregation in electrical distribution cabinets.
- Vertical lateral partitioning arrangements within modular switchboards.
- Front segregation of designated switchgear equipment areas.
- Upper internal segregation arrangements in compatible electrical enclosures.
- Industrial low-voltage electrical distribution panels.
- Commercial power distribution switchboards.
- Compatible internal segregation configurations with an 800 mm nominal height.
- OEM electrical panel building and professional switchboard manufacturing.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| Product designation | PTVS8001 |
| ABB order code | 1STQ008511A0000 |
| Part number | 1STQ008511A0000 |
| Manufacturer description | SEGR.VER.LAT.FRONT.+INT.UP.H800+PRE-C. |
| Product type | Internal switchgear segregation accessory |
| Primary segregation arrangement | Vertical lateral |
| Additional segregation designation | Front and upper internal |
| Nominal height | 800 mm |
| Manufacturer configuration designation | PRE-C. |
| Installation area | Internal switchgear compartment segregation |
| Compatible enclosure system | ABB System Pro E Power |
| Application | Low-voltage electrical distribution assemblies |
| Nominal enclosure width and depth | Not specified |
| Exact supplied component quantity | Not established by the supplied specification |
Frequently Asked Questions
What is the ABB PTVS8001 1STQ008511A0000 used for?
The ABB PTVS8001 is an internal segregation accessory for compatible ABB System Pro E Power low-voltage switchgear assemblies. It is specified for vertical lateral segregation incorporating front and upper internal provisions, with an 800 mm nominal height.
What are the dimensions of the ABB PTVS8001?
The supplied specification identifies an 800 mm nominal height. It does not specify an enclosure width, depth or exact overall component dimensions. These measurements and the complete installation configuration should be confirmed against the relevant ABB technical documentation.
What does front and upper internal segregation mean for the ABB PTVS8001?
The manufacturer's FRONT.+INT.UP. designation identifies a segregation arrangement incorporating front and upper internal provisions. The precise positioning, component arrangement and interfaces with adjacent switchgear parts must be established using the applicable ABB assembly instructions.
What does PRE-C. mean in the ABB PTVS8001 description?
The abbreviation PRE-C. appears in the manufacturer description SEGR.VER.LAT.FRONT.+INT.UP.H800+PRE-C.. Its precise meaning is not established by the supplied specification. Panel builders should consult the relevant ABB catalogue or installation documentation before interpreting it as a particular construction feature or supplied accessory.
Does the ABB PTVS8001 establish a specific IEC 61439 internal separation form?
No. The PTVS8001 is an internal segregation accessory, but a specific IEC 61439 internal separation form depends on the design and verification of the complete switchgear assembly. The required separation form and overall compliance must be confirmed against the applicable ABB documentation and completed switchboard configuration.
ABB System Pro E Power Solutions for Professional Panel Builders
ABB System Pro E Power provides modular components for professional low-voltage switchgear construction. The ABB PTVS8001 (1STQ008511A0000) offers a dedicated vertical lateral segregation solution incorporating front and upper internal provisions for a compatible 800 mm nominal-height arrangement, supporting organised compartment separation and accurate component selection in electrical distribution assemblies.
