Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008510A0000 ABB PFVS2080 Vertical Front Segregation Accessory H200 W800
ABB PFVS2080 (1STQ008510A0000) is a System Pro E Power vertical front segregation accessory with a 200 mm height specification, designed for compatible low-voltage switchgear assemblies with a nominal enclosure width of 800 mm.
£79.34
Why Choose the ABB PFVS2080 Vertical Front Segregation Kit?
The ABB PFVS2080 (1STQ008510A0000) is a dedicated vertical front segregation accessory designed for compatible ABB System Pro E Power low-voltage electrical distribution assemblies. Specified for a 200 mm installation height and an 800 mm nominal enclosure width, this component supports the creation of defined internal separation arrangements within modular switchgear cabinets.
As part of the ABB System Pro E Power product range, the PFVS2080 provides a purpose-designed solution for front-facing internal segregation. Its vertical front arrangement supports separation of designated equipment areas within the switchboard, helping panel builders organise compartment layouts and establish appropriate physical boundaries between internal sections.
The manufacturer description SEGR.VER.FRONT.H200EACH W W800 identifies the accessory as a vertical front segregation component with a 200 mm height specification for an 800 mm-wide enclosure configuration. The wording also includes an “EACH W” designation, which should be interpreted using the applicable ABB installation documentation rather than assumed to specify a particular number of supplied components. The ABB PFVS2080 is intended for professional panel builders constructing compatible System Pro E Power switchgear assemblies.
Key Advantages
- Dedicated vertical front segregation accessory for compatible ABB System Pro E Power switchgear.
- 200 mm height specification supports the designated internal segregation arrangement.
- 800 mm nominal enclosure width for compatible modular switchgear structures.
- Front segregation configuration helps define physical boundaries within electrical distribution assemblies.
- Vertical arrangement supports structured compartment layouts.
- Provides a purpose-specific component for professional low-voltage switchboard construction.
- Designed for integration with ABB System Pro E Power modular enclosure accessories.
- Supports consistent selection of components for planned internal separation arrangements.
- ABB order code 1STQ008510A0000 enables accurate identification and procurement.
Key Features
- ABB System Pro E Power internal segregation accessory.
- PFVS2080 manufacturer product designation.
- 1STQ008510A0000 ABB order code.
- Vertical front segregation configuration.
- 200 mm specified installation height.
- 800 mm nominal enclosure width.
- “EACH W” designation in the manufacturer description.
- Designed for compatible modular low-voltage switchgear assemblies.
- Supports internal separation of designated switchboard areas.
- Suitable for professional electrical panel building and switchboard manufacturing.
Front Compartment Segregation for ABB System Pro E Power Switchgear
Internal segregation helps panel builders organise electrical distribution assemblies into defined functional areas. The ABB PFVS2080 is specified for a vertical front segregation arrangement within compatible System Pro E Power switchgear structures. Its 200 mm height designation and 800 mm nominal enclosure width identify the intended modular installation configuration.
Front segregation components may form part of a wider internal partitioning system, depending on the switchboard design. When selecting the PFVS2080, panel builders should confirm how the accessory interfaces with adjacent partitions, enclosure structures and installed electrical equipment. The manufacturer's “EACH W” wording is retained in the technical specification, but the supplied description does not independently establish the precise component count, material or fastening arrangement.
ABB System Pro E Power supports modular low-voltage switchboard construction, including assemblies designed and verified against applicable IEC 61439 requirements. However, the PFVS2080 alone does not establish a particular internal separation form, ingress protection rating, arc-fault performance or completed assembly compliance. These characteristics depend on the overall switchgear design, the arrangement of adjoining components and the relevant assembly verification. Compatibility and installation details should be checked against the applicable ABB technical documentation.
Typical Applications
- ABB System Pro E Power modular low-voltage switchgear assemblies.
- Front internal segregation in electrical distribution cabinets.
- Vertical separation arrangements within modular switchboards.
- Industrial low-voltage electrical distribution panels.
- Commercial electrical switchgear and distribution assemblies.
- Compartment layouts requiring a 200 mm-high front segregation arrangement.
- Compatible switchgear structures with an 800 mm nominal enclosure width.
- OEM electrical panel building and professional switchboard manufacturing.
- Internal partitioning systems using compatible ABB segregation accessories.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| Product designation | PFVS2080 |
| ABB order code | 1STQ008510A0000 |
| Part number | 1STQ008510A0000 |
| Manufacturer description | SEGR.VER.FRONT.H200EACH W W800 |
| Product type | Internal segregation accessory |
| Segregation arrangement | Vertical front |
| Specified height | 200 mm |
| Nominal enclosure width | 800 mm |
| Manufacturer configuration designation | EACH W |
| Installation area | Front internal switchgear segregation |
| Compatible enclosure system | ABB System Pro E Power |
| Application | Low-voltage electrical distribution assemblies |
| Exact supplied component quantity | Not established by the supplied specification |
Frequently Asked Questions
What is the ABB PFVS2080 1STQ008510A0000 used for?
The ABB PFVS2080 is a vertical front segregation accessory for compatible ABB System Pro E Power low-voltage switchgear assemblies. It supports internal separation arrangements and is specified for a 200 mm height and an 800 mm nominal enclosure width.
What are the dimensions of the ABB PFVS2080?
The PFVS2080 is specified with a 200 mm height designation and compatibility with an 800 mm nominal enclosure width. These values describe the intended installation configuration rather than independently verified overall component dimensions. Exact measurements should be checked against ABB technical documentation.
What does vertical front segregation mean for the ABB PFVS2080?
Vertical front segregation describes an internal separation arrangement positioned at the front of designated switchgear areas. The PFVS2080 is intended for use as part of a compatible ABB System Pro E Power compartment segregation system, with its exact mounting position determined by the approved assembly design.
What does EACH W mean in the ABB PFVS2080 description?
The wording “EACH W” appears in the manufacturer description SEGR.VER.FRONT.H200EACH W W800. The supplied specification does not explain this abbreviation or confirm a particular quantity of supplied components. The relevant ABB catalogue or installation instructions should be consulted for its precise meaning.
Does the ABB PFVS2080 establish a specific IEC 61439 internal separation form?
No. The PFVS2080 is an internal segregation accessory, but a specific IEC 61439 internal separation form depends on the arrangement and verification of the complete switchgear assembly. The required separation form and overall compliance must be confirmed against the applicable ABB documentation and completed switchboard design.
ABB System Pro E Power Solutions for Professional Panel Builders
ABB System Pro E Power provides modular components for professional low-voltage switchgear construction. The ABB PFVS2080 (1STQ008510A0000) offers a dedicated vertical front segregation solution for a 200 mm height configuration within compatible 800 mm-wide switchgear structures, supporting organised internal compartment separation and accurate component selection.
