Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008503A0000 ABB PTHS6050 Horizontal Segregation Panel 600 x 500 mm System pro E power
ABB PTHS6050 (1STQ008503A0000) is a horizontal internal segregation panel for System pro E power low-voltage switchboards without intermediate uprights, designed for 600 mm wide and 500 mm deep enclosure sections.
£103.17
Why Choose the ABB PTHS6050 Horizontal Segregation Panel?
The ABB PTHS6050, manufacturer order code 1STQ008503A0000, is a purpose-designed horizontal segregation panel for low-voltage electrical distribution switchboards. Part of the ABB System pro E power series, this internal partition is designed to provide horizontal separation between functional areas within compatible electrical switchboard assemblies, supporting organised equipment installation and professional power distribution system construction.
Specifically developed for switchboard structures without intermediate uprights, the PTHS6050 provides a dedicated internal separation solution for electrical panel builders, switchboard manufacturers and industrial electrical contractors. Its horizontal mounting arrangement helps establish defined compartment boundaries within modular distribution assemblies, supporting structured equipment layouts and efficient use of available enclosure space.
With a nominal width of 600 mm and depth of 500 mm, the PTHS6050 is designed for compatible ABB System pro E power switchboard structures. Its horizontal installation configuration makes it suitable for electrical distribution assemblies where internal compartment separation is required without intermediate structural uprights.
Key Advantages
- Purpose-designed horizontal segregation panel for ABB System pro E power switchboards.
- Provides physical separation between internal switchboard compartments.
- Specifically designed for structures without intermediate uprights.
- 600 mm nominal width for compatible modular switchboard sections.
- 500 mm nominal depth for corresponding electrical enclosure structures.
- Horizontal partition arrangement supports organised electrical equipment layouts.
- Helps establish defined boundaries between vertically adjacent functional areas.
- Supports professional electrical panel construction and modular switchboard assembly.
- Suitable for industrial and commercial low-voltage power distribution applications.
- Designed for integration with the ABB System pro E power modular switchboard platform.
Key Features
- ABB System pro E power internal segregation accessory.
- PTHS6050 manufacturer type designation.
- 1STQ008503A0000 ABB order code.
- Horizontal internal segregation panel for electrical switchboards.
- Designed for switchboard structures without intermediate uprights.
- 600 mm nominal switchboard width.
- 500 mm nominal switchboard depth.
- Horizontal mounting orientation within compatible switchboard structures.
- Supports separation between vertically adjacent internal functional areas.
- Suitable for compatible switchboard configurations incorporating electrical distribution and protection equipment.
- Designed for professional low-voltage switchboard construction.
- Compatible with the ABB System pro E power enclosure and distribution assembly system.
Reliable Horizontal Segregation for Electrical Distribution Switchboards
The ABB PTHS6050 is designed to provide horizontal internal separation within compatible System pro E power switchboard structures. Horizontal segregation panels help establish physical boundaries between functional areas of electrical distribution assemblies, supporting organised equipment positioning and the implementation of the required internal compartment layout.
The PTHS6050 is specifically intended for structures without intermediate uprights. This configuration allows the partition to be incorporated into compatible switchboard arrangements where additional intermediate structural members are not used. Its nominal 600 mm width and 500 mm depth correspond to the intended System pro E power enclosure configuration.
Internal horizontal segregation can help separate electrical equipment installed at different levels within a switchboard, contributing to structured compartmentalisation and consistent panel construction. The partition should be installed using the appropriate ABB mounting arrangement, with its positioning, support requirements and any necessary electrical clearances determined by the complete switchboard design.
As part of the ABB System pro E power modular switchboard system, the PTHS6050 supports professional assembly of low-voltage distribution equipment. The final form of internal separation, enclosure protection rating and electrical performance depend on the complete switchboard configuration, including the selected structural components, busbars, protective devices and associated partitions. The segregation panel itself does not provide an independent electrical protection or switching function.
Typical Applications
- ABB System pro E power low-voltage electrical switchboards.
- Horizontal compartment segregation in power distribution assemblies.
- Industrial electrical distribution and protection systems.
- Commercial building electrical switchboards.
- Switchboard structures without intermediate uprights.
- Separation of vertically adjacent functional areas within electrical enclosures.
- Modular switchboard construction and internal compartmentalisation.
- Electrical panel manufacturing and switchboard refurbishment projects.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Series | System pro E power Segregation Accessories |
| Model / type | PTHS6050 |
| ABB order code | 1STQ008503A0000 |
| Product type | Horizontal segregation panel |
| Component category | Internal switchboard partition / segregation accessory |
| Segregation configuration | Horizontal internal partition |
| Nominal switchboard width | 600 mm |
| Nominal switchboard depth | 500 mm |
| Installation orientation | Horizontal |
| Mounting application | Internal horizontal compartment segregation |
| Intermediate upright requirement | Not required |
| Compatible enclosure system | ABB System pro E power |
| Application | Internal segregation of low-voltage electrical distribution switchboards |
Frequently Asked Questions
What is the ABB PTHS6050 used for?
The ABB PTHS6050 is a horizontal segregation panel used to provide internal separation between functional areas within compatible ABB System pro E power low-voltage electrical switchboards.
What are the dimensions of the ABB PTHS6050?
The PTHS6050 is designed for a nominal switchboard section measuring 600 mm wide and 500 mm deep. These dimensions identify the compatible enclosure configuration rather than necessarily representing the exact external dimensions of the partition itself.
Does the PTHS6050 require an intermediate upright?
No. The PTHS6050 is specifically designed for switchboard structures without intermediate uprights, allowing it to be incorporated into compatible horizontal segregation arrangements.
What is the difference between the ABB PTHS6050 and PTHS6030?
Both products are horizontal segregation panels for ABB System pro E power switchboards without intermediate uprights. The PTHS6050 is designed for a 600 mm wide, 500 mm deep switchboard section, whereas the PTHS6030 is intended for a 600 mm wide, 300 mm deep configuration.
Does the ABB PTHS6050 provide an IP protection rating on its own?
No. The PTHS6050 is an internal segregation accessory, not an external enclosure cover. The final IP protection rating and form of internal separation depend on the complete ABB System pro E power switchboard assembly and correct installation of all associated components.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power segregation accessories support electrical engineers, industrial contractors and switchboard manufacturers in constructing organised and dependable low-voltage distribution assemblies. The PTHS6050 provides a dedicated horizontal partition solution for 600 mm wide, 500 mm deep switchboard sections without intermediate uprights, helping achieve consistent internal compartment separation and professional electrical panel construction.
