Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS6030 (1STQ008502A0000) is a horizontal internal segregation panel for System pro E power low-voltage switchboards without intermediate uprights, designed for 600 mm wide and 300 mm deep enclosure sections.
£99.53
The ABB PTHS6030, manufacturer order code 1STQ008502A0000, is a purpose-designed horizontal segregation panel for low-voltage electrical distribution switchboards. Part of the ABB System pro E power series, this internal partition is designed to provide horizontal separation between functional areas within compatible electrical switchboard assemblies, supporting organised equipment installation and professional power distribution system construction.
Specifically developed for switchboard structures without intermediate uprights, the PTHS6030 provides a dedicated internal separation solution for electrical panel builders, switchboard manufacturers and industrial electrical contractors. Its horizontal arrangement helps establish defined compartment boundaries within modular distribution assemblies, supporting structured equipment layouts and effective use of available enclosure space.
With a nominal width of 600 mm and depth of 300 mm, the PTHS6030 is designed for compatible ABB System pro E power switchboard structures. Its horizontal installation configuration makes it suitable for electrical distribution assemblies where internal compartment separation is required without the use of intermediate structural uprights.
The ABB PTHS6030 is designed to provide horizontal internal separation within compatible System pro E power switchboard structures. Horizontal segregation panels help establish physical boundaries between functional areas of an electrical distribution assembly, supporting organised equipment positioning and the implementation of the required internal compartment layout.
The PTHS6030 is specifically intended for structures without intermediate uprights. This configuration allows the partition to be incorporated into compatible switchboard arrangements where additional intermediate structural members are not used. Its 600 mm width and 300 mm depth correspond to the nominal dimensions of the intended System pro E power enclosure section.
Internal horizontal segregation can help separate equipment installed at different levels within a switchboard, contributing to structured compartmentalisation and consistent panel construction. The partition must be installed using the appropriate ABB mounting arrangement, with its positioning and any required clearances determined by the complete switchboard design.
As part of the ABB System pro E power modular switchboard system, the PTHS6030 supports professional assembly of low-voltage distribution equipment. The final form of internal separation, enclosure protection rating and electrical performance depend on the complete switchboard configuration, including the selected structural components, busbars, protective devices and associated partitions. The segregation panel does not provide an independent electrical protection or switching function.
| Product group | System pro E power |
|---|---|
| Series | System pro E power Segregation Accessories |
| Model / type | PTHS6030 |
| ABB order code | 1STQ008502A0000 |
| Product type | Horizontal segregation panel |
| Component category | Internal switchboard partition / segregation accessory |
| Segregation configuration | Horizontal internal partition |
| Nominal width | 600 mm |
| Nominal depth | 300 mm |
| Installation orientation | Horizontal |
| Mounting application | Internal horizontal compartment segregation |
| Intermediate upright requirement | Not required |
| Compatible enclosure system | ABB System pro E power |
| Application | Internal segregation of low-voltage electrical distribution switchboards |
The ABB PTHS6030 is a horizontal segregation panel used to provide internal separation between functional areas within compatible ABB System pro E power low-voltage electrical switchboards.
The PTHS6030 is designed for a nominal switchboard section measuring 600 mm wide and 300 mm deep. These dimensions identify the compatible enclosure configuration rather than necessarily representing the exact external dimensions of the partition itself.
No. The PTHS6030 is specifically designed for switchboard structures without intermediate uprights, allowing it to be incorporated into compatible horizontal segregation arrangements.
Horizontal segregation panels, such as the ABB PTHS6030, provide separation between internal areas positioned above and below one another. Vertical segregation panels provide lateral separation between adjacent areas within the switchboard. Both types are used according to the required internal compartment arrangement.
No. The PTHS6030 is an internal segregation accessory, not an external enclosure cover. The final IP protection rating and form of internal separation depend on the complete ABB System pro E power switchboard assembly and correct installation of all associated components.
ABB System pro E power segregation accessories support electrical engineers, industrial contractors and switchboard manufacturers in constructing organised and dependable low-voltage distribution assemblies. The PTHS6030 provides a dedicated horizontal partition solution for 600 mm wide, 300 mm deep switchboard sections without intermediate uprights, helping achieve consistent internal compartment separation and professional electrical panel construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.