Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008498A0000 ABB PTBS1070 System pro E power Blind Vertical Lateral Segregation Panel H1000 D700
ABB PTBS1070 is a System pro E power blind vertical lateral segregation panel specified for 1000 mm height and 700 mm depth with a NO IN.UP. configuration designation for compatible low-voltage switchboard assemblies.
£113.91
Why Choose the ABB PTBS1070 System pro E power Vertical Lateral Segregation Panel?
The ABB PTBS1070, order code 1STQ008498A0000, is a specialised blind vertical lateral segregation panel designed for the ABB System pro E power low-voltage switchboard system. This enclosure accessory is specified for a nominal height of 1000 mm and depth of 700 mm, providing a dedicated internal separation solution for compatible electrical distribution assemblies.
As part of ABB's modular System pro E power range, the PTBS1070 supports the construction of compartmentalised low-voltage switchboards where organised equipment layouts and physical separation between designated internal areas are required. Its vertical lateral arrangement allows it to form part of a compatible internal segregation system, helping electrical panel builders establish defined boundaries between switchboard compartments.
The manufacturer's description, SEGR.VER.LAT.NO IN.UP. H1000 D700 BLIND, identifies a blind segregation configuration with the additional NO IN.UP. designation. The blind construction distinguishes this variant from open or perforated segregation accessories, making it suitable for compatible switchboard layouts requiring a closed partition arrangement.
Key Advantages
- Designed specifically for the ABB System pro E power modular switchboard system.
- Provides a dedicated vertical lateral segregation solution for compatible low-voltage switchboards.
- Blind panel configuration supports physical separation without an intentional opening through the panel.
- Specified for a nominal height of 1000 mm.
- Designed for a corresponding depth configuration of 700 mm.
- Supports organised internal compartment layouts within electrical distribution assemblies.
- Helps establish defined boundaries between designated switchboard areas.
- Includes the manufacturer's NO IN.UP. configuration designation.
- Supports integration with compatible ABB structural, mounting and segregation components.
- Suitable for industrial and commercial low-voltage electrical distribution applications.
Key Features
- ABB System pro E power switchboard segregation accessory.
- PTBS1070 manufacturer model designation.
- Vertical lateral segregation arrangement.
- Blind panel construction.
- 1000 mm specified height.
- 700 mm specified depth.
- NO IN.UP. manufacturer configuration designation.
- Designed for internal physical separation within compatible switchboard structures.
- Supports modular compartmentalisation and equipment organisation.
- Intended for integration with appropriately configured ABB System pro E power assemblies.
Blind Vertical Lateral Segregation for Electrical Switchboards
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards used in industrial facilities, commercial buildings and infrastructure installations. Internal segregation accessories such as the PTBS1070 contribute to the physical arrangement of electrical equipment by helping panel builders establish designated compartments and separation boundaries.
The ABB PTBS1070 is specifically configured for vertical lateral segregation with a nominal height of 1000 mm and depth of 700 mm. These dimensions should correspond to the selected switchboard structure and its associated internal segregation components.
Its blind construction provides a closed panel arrangement rather than a panel incorporating an intentional access opening. This can be useful where the switchboard design requires physical separation between adjacent internal areas. The resulting separation depends on how the panel is installed alongside compatible barriers, supports, covers and other enclosure components.
The NO IN.UP. designation identifies a particular manufacturer-specified configuration. Its precise application should be checked against the relevant ABB System pro E power technical documentation to ensure that the selected segregation panel matches the intended internal assembly layout.
The PTBS1070 is an individual segregation component, not a complete compartment or a standalone electrical protective device. The form of internal separation achieved by a finished switchboard must be established through the complete assembly design and applicable verification requirements under BS EN IEC 61439. Installing this panel alone does not establish a particular form of separation, ingress protection rating or electrical performance.
Typical Applications
- ABB System pro E power low-voltage switchboard assemblies.
- Industrial electrical distribution cabinets.
- Commercial building main and sub-distribution switchboards.
- Vertical lateral segregation within modular electrical enclosures.
- Internal compartment separation using blind panel arrangements.
- Switchboard configurations requiring a 1000 mm high segregation component.
- Compatible electrical distribution assemblies with a 700 mm depth configuration.
- Electrical switchgear and controlgear assemblies.
- Industrial panel-building projects requiring manufacturer-specific internal segregation accessories.
Technical Specifications
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ008498A0000 |
| Product group | System Pro E Power |
| Product type | Vertical lateral segregation panel |
| Segregation orientation | Vertical |
| Segregation arrangement | Lateral |
| Panel configuration | Blind |
| Specified height | 1000 mm |
| Specified depth | 700 mm |
| Configuration designation | NO IN.UP. |
| Manufacturer description | SEGR.VER.LAT.NO IN.UP. H1000 D700 BLIND |
| Installation application | Internal switchboard segregation |
| System compatibility | ABB System pro E power |
| Equipment application | Low-voltage electrical distribution assemblies |
Frequently Asked Questions
What is the ABB PTBS1070 used for?
The ABB PTBS1070 is a blind vertical lateral segregation panel designed for compatible ABB System pro E power low-voltage switchboards. It supports internal physical separation and compartment organisation within the specified assembly configuration.
What are the dimensions of the ABB PTBS1070?
The PTBS1070 is specified for a nominal height of 1000 mm and depth of 700 mm. These dimensions should be matched to the corresponding ABB System pro E power switchboard structure.
What does blind mean in the ABB PTBS1070 product description?
The blind designation identifies a closed segregation panel configuration without an intentional opening through the panel. It is intended for compatible internal separation arrangements within the switchboard.
What does NO IN.UP. mean for the ABB PTBS1070?
NO IN.UP. is a manufacturer configuration designation included in the ABB product description. Its precise meaning and the corresponding installation requirements should be established from the relevant ABB System pro E power technical documentation.
Does the ABB PTBS1070 provide a complete form of internal separation?
No. The PTBS1070 is an individual segregation panel. The finished switchboard's form of internal separation depends on the complete arrangement of compatible barriers, partitions, compartments and associated components, together with the applicable assembly verification requirements.
Trusted ABB Switchboard Segregation Solutions
ABB System pro E power accessories support the construction of modular low-voltage electrical switchboards with organised internal layouts. The ABB PTBS1070 provides a dedicated blind vertical lateral segregation solution for compatible 1000 mm high and 700 mm deep configurations, helping electrical panel builders integrate manufacturer-specific separation components into professional electrical distribution assemblies.
