Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBS8070 (1STQ008497A0000) is a System Pro E Power blind vertical lateral segregation panel with no upper inlet, designed for compatible low-voltage switchgear assemblies with a nominal installation height of 800 mm and depth of 700 mm.
£92.03
The ABB PTBS8070 (1STQ008497A0000) is a dedicated blind vertical lateral segregation panel designed for compatible ABB System Pro E Power low-voltage electrical distribution assemblies. Specified for a nominal height of 800 mm and nominal depth of 700 mm, this accessory supports internal compartment separation within modular electrical switchgear cabinets.
As part of the ABB System Pro E Power product range, the PTBS8070 provides a purpose-designed solution for internal switchgear segregation. Its vertical lateral configuration supports physical separation between adjacent equipment areas, while the blind panel design provides a partition without a designated opening for cable passage or equipment access.
The manufacturer's specification, SEGR.VER.LAT.NO IN.UP. H800 D700 BLIND, identifies the panel as a vertical lateral segregation accessory with a no upper inlet configuration. Combining its 800 mm nominal height, 700 mm nominal depth and blind construction, the ABB PTBS8070 is suitable for professional panel builders planning compatible System Pro E Power switchgear layouts.
Internal segregation is an important consideration when designing low-voltage electrical distribution assemblies. The ABB PTBS8070 provides a vertical lateral partition for compatible System Pro E Power structures, helping define physical boundaries between adjacent internal switchgear areas. Its 800 mm nominal height and 700 mm nominal depth identify the intended installation configuration within the modular enclosure system.
The blind construction distinguishes the PTBS8070 from segregation components that incorporate dedicated openings. Its no upper inlet designation indicates that the specified configuration does not provide an upper inlet passage through the partition. This makes it relevant to switchboard layouts where the designated separation area is intended to remain closed rather than accommodate an upper cable or connection opening.
The ABB System Pro E Power platform supports modular low-voltage switchgear construction, including assemblies designed and verified against applicable IEC 61439 requirements. However, installing the PTBS8070 alone does not establish a particular internal separation form, ingress protection rating, arc-fault performance or completed assembly compliance. These characteristics depend on the full switchgear design, adjoining components, installation details and verification. Panel builders should confirm compatibility and the required segregation arrangement against the applicable ABB documentation.
| Product group | System Pro E Power |
|---|---|
| Product designation | PTBS8070 |
| ABB order code | 1STQ008497A0000 |
| Part number | 1STQ008497A0000 |
| Manufacturer description | SEGR.VER.LAT.NO IN.UP. H800 D700 BLIND |
| Product type | Internal segregation panel |
| Segregation arrangement | Vertical lateral |
| Panel configuration | Blind |
| Upper inlet configuration | No upper inlet |
| Nominal height | 800 mm |
| Nominal depth | 700 mm |
| Nominal configuration (H × D) | 800 × 700 mm |
| Installation area | Internal switchgear compartment separation |
| Compatible enclosure system | ABB System Pro E Power |
| Application | Low-voltage electrical distribution assemblies |
The ABB PTBS8070 is a blind vertical lateral segregation panel for compatible ABB System Pro E Power low-voltage switchgear assemblies. It supports physical separation between adjacent internal switchgear areas and is specified for a nominal height of 800 mm and depth of 700 mm.
The PTBS8070 is specified with a nominal height of 800 mm and a nominal depth of 700 mm. These values identify the intended installation configuration. Exact component measurements and mounting details should be checked against the relevant ABB technical documentation.
Blind identifies a segregation panel configuration without a designated opening through the partition. It is intended to provide physical separation within the compatible switchgear assembly rather than a passage for cables or other components.
The manufacturer's no upper inlet designation indicates that this segregation configuration does not incorporate a designated upper inlet passage. Panel builders should select the appropriate segregation components according to the required cable routing, compartment layout and ABB assembly instructions.
Not by itself. The PTBS8070 is an internal segregation component, but a specific IEC 61439 internal separation form depends on the design and arrangement of the complete switchgear assembly. The required separation form and overall assembly compliance must be verified using the applicable ABB documentation and assembly design.
ABB System Pro E Power provides modular components for professional low-voltage switchgear construction. The ABB PTBS8070 (1STQ008497A0000) offers a dedicated blind vertical lateral segregation solution with a no-upper-inlet configuration for compatible 800 × 700 mm nominal height-and-depth arrangements, supporting organised internal compartment separation in electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.