1STQ008496A0000 ABB PTBS1050 Blind Vertical Lateral Segregation Panel No Upper Inlet H1000 D500

1STQ008496A0000 ABB PTBS1050 Blind Vertical Lateral Segregation Panel No Upper Inlet H1000 D500

ABB PTBS1050 (1STQ008496A0000) is a System Pro E Power blind vertical lateral segregation panel with no upper inlet, designed for compatible low-voltage switchgear assemblies with a nominal installation height of 1000 mm and depth of 500 mm.

SKU: 1STQ008496A0000Alt SKU: PTBS1050MPN: 1STQ008496A0000
Price
List Price £84.01 ex VAT
Your Price (ex VAT)
£84.01
Manufacturer Lead Time Estimated Delivery 3 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £84.01
Trade pricing is personalised to your account

Manufacturer Lead Time

£84.01

Why Choose the ABB PTBS1050 Vertical Lateral Segregation Panel?

The ABB PTBS1050 (1STQ008496A0000) is a dedicated blind vertical lateral segregation panel designed for compatible ABB System Pro E Power low-voltage electrical distribution assemblies. Specified with a nominal height of 1000 mm and nominal depth of 500 mm, this accessory supports internal compartment separation within modular electrical switchgear cabinets.

As part of the ABB System Pro E Power product range, the PTBS1050 provides a purpose-designed segregation solution for compatible enclosure configurations. Its vertical lateral arrangement supports separation between adjacent internal switchgear areas, while the blind panel design provides a continuous partition without an intentionally open access or cable-passage section.

The manufacturer designation SEGR.VER.LAT.NO IN.UP. H1000 D500 BLIND identifies the panel as a vertical lateral segregation accessory with a specified no upper inlet configuration. Combining its 1000 mm nominal height, 500 mm nominal depth and blind construction, the ABB PTBS1050 offers a dedicated component for professional panel builders planning internal separation within compatible System Pro E Power assemblies.

Key Advantages

  • Dedicated vertical lateral segregation panel for compatible ABB System Pro E Power switchgear.
  • Blind partition configuration provides a continuous separation panel without a designated opening.
  • No upper inlet arrangement supports switchboard layouts that do not require an upper passage through the segregation panel.
  • 1000 mm nominal height for the specified internal switchgear configuration.
  • 500 mm nominal depth for compatible modular enclosure structures.
  • Vertical installation arrangement supports organised internal compartment separation.
  • Helps panel builders establish defined physical boundaries between adjacent equipment areas.
  • Designed for integration with ABB System Pro E Power modular low-voltage switchgear components.
  • ABB order code 1STQ008496A0000 enables accurate identification and specification.

Key Features

  • ABB System Pro E Power internal segregation accessory.
  • PTBS1050 manufacturer product designation.
  • 1STQ008496A0000 ABB order code.
  • Vertical lateral segregation configuration.
  • Blind partition design.
  • No upper inlet configuration.
  • 1000 mm nominal installation height.
  • 500 mm nominal installation depth.
  • Designed for internal separation in compatible low-voltage switchgear assemblies.
  • Suitable for professional modular switchboard construction.

Internal Compartment Separation for ABB System Pro E Power Switchgear

Internal segregation is an important consideration when designing low-voltage electrical distribution assemblies. The ABB PTBS1050 provides a vertical lateral partition for compatible System Pro E Power structures, helping define physical boundaries between adjacent internal switchgear areas. Its 1000 mm nominal height and 500 mm nominal depth identify the intended installation configuration within the modular enclosure system.

The blind construction distinguishes the PTBS1050 from segregation components incorporating dedicated openings. Its no upper inlet designation indicates that the specified configuration does not provide an upper inlet passage through the partition. This makes it relevant to layouts where the designated separation area is intended to remain closed rather than accommodate an upper cable or connection opening.

The ABB System Pro E Power platform supports modular low-voltage switchgear construction, including assemblies designed and verified to applicable requirements of IEC 61439. However, the PTBS1050 alone does not establish a particular internal separation form, ingress protection rating, arc-fault performance or completed assembly compliance. These characteristics depend on the full switchgear design, adjoining components, installation details and verification. Panel builders should confirm the required segregation arrangement and compatibility against the applicable ABB documentation.

Typical Applications

  • ABB System Pro E Power modular low-voltage switchgear assemblies.
  • Internal compartment segregation in electrical distribution cabinets.
  • Vertical separation between adjacent switchgear equipment areas.
  • Industrial electrical distribution switchboards.
  • Commercial low-voltage power distribution assemblies.
  • Switchgear configurations requiring a blind lateral partition.
  • Enclosure layouts without a designated upper inlet through the segregation panel.
  • Compatible 1000 mm-high and 500 mm-deep segregation arrangements.
  • OEM electrical panel building and professional switchboard manufacturing.

Technical Specifications

Product group System Pro E Power
Product designation PTBS1050
ABB order code 1STQ008496A0000
Part number 1STQ008496A0000
Manufacturer description SEGR.VER.LAT.NO IN.UP. H1000 D500 BLIND
Product type Internal segregation panel
Segregation arrangement Vertical lateral
Panel configuration Blind
Upper inlet configuration No upper inlet
Nominal height 1000 mm
Nominal depth 500 mm
Nominal configuration (H × D) 1000 × 500 mm
Installation area Internal switchgear compartment separation
Compatible enclosure system ABB System Pro E Power
Application Low-voltage electrical distribution assemblies

Frequently Asked Questions

What is the ABB PTBS1050 1STQ008496A0000 used for?

The ABB PTBS1050 is a blind vertical lateral segregation panel for compatible ABB System Pro E Power low-voltage switchgear assemblies. It supports physical separation between adjacent internal switchgear areas and is specified for a nominal height of 1000 mm and depth of 500 mm.

What are the dimensions of the ABB PTBS1050?

The PTBS1050 is specified with a nominal height of 1000 mm and a nominal depth of 500 mm. These values identify the intended installation configuration. Exact component measurements and mounting details should be checked against the relevant ABB technical documentation.

What does blind mean in the ABB PTBS1050 specification?

Blind identifies a segregation panel configuration without a designated opening through the partition. It is intended to provide physical separation within the compatible switchgear assembly rather than a passage for cables or other components.

What does no upper inlet mean for the ABB PTBS1050?

The manufacturer's no upper inlet designation indicates that this segregation configuration does not incorporate a designated upper inlet passage. Panel builders should select the appropriate segregation components according to the required cable routing, compartment layout and ABB assembly instructions.

Does the ABB PTBS1050 establish a specific IEC 61439 internal separation form?

Not by itself. The PTBS1050 is an internal segregation component, but a specific IEC 61439 internal separation form depends on the design and arrangement of the complete switchgear assembly. The required separation form and overall assembly compliance must be verified using the applicable ABB documentation and assembly design.

ABB System Pro E Power Solutions for Professional Panel Builders

ABB System Pro E Power provides modular components for professional low-voltage switchgear construction. The ABB PTBS1050 (1STQ008496A0000) offers a dedicated blind vertical lateral segregation solution with a no-upper-inlet configuration for compatible 1000 × 500 mm nominal height-and-depth arrangements, supporting organised internal compartment separation in electrical distribution assemblies.