Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008493A0000 ABB PTBS8030 Blind Vertical Lateral Segregation Panel H800 D300 System pro E power
ABB PTBS8030 1STQ008493A0000 is a blind vertical lateral segregation panel for compatible System pro E power low-voltage switchgear enclosures, specified with an 800 mm nominal height, 300 mm nominal depth and NO IN.UP. configuration reference.
£41.34
Why Choose the ABB PTBS8030 Blind Vertical Lateral Segregation Panel?
The ABB PTBS8030 (1STQ008493A0000) is a blind vertical lateral segregation panel designed for compatible ABB System pro E power low-voltage switchgear enclosures. Specified with a nominal 800 mm height and 300 mm depth, this accessory supports internal compartment separation within modular electrical distribution cabinets.
Part of the ABB System pro E power range, the PTBS8030 provides a dedicated segregation component for switchboard configurations requiring a vertical lateral partition without a designated opening. Its blind panel arrangement is intended to provide a continuous partition surface within the specified enclosure configuration, helping electrical panel builders organise adjacent equipment spaces and internal cabinet sections.
The manufacturer's description, SEGR.VER.LAT.NO IN.UP. H800 D300 BLIND, identifies the component as a vertical lateral segregation accessory with a blind configuration. The additional reference NO IN.UP. distinguishes the specified version and should be checked against the relevant ABB System pro E power installation documentation.
Designed for integration into ABB's modular switchgear platform, the PTBS8030 supports coordinated enclosure construction where correctly selected internal barriers, structural components and equipment mounting arrangements are required.
Key Advantages
- Dedicated vertical lateral segregation: Supports separation between designated internal areas of compatible electrical switchgear enclosures.
- Blind panel construction: Provides a partition arrangement without a designated opening.
- 800 mm nominal height: Designed for matching vertical segregation configurations.
- 300 mm nominal depth: Suitable for compatible System pro E power enclosure sections.
- System pro E power integration: Developed for ABB's modular low-voltage switchgear platform.
- Organised compartment layouts: Helps panel builders establish defined internal equipment areas.
- Coordinated accessory selection: Uses a dedicated ABB product designation for the specified partition arrangement.
- Flexible switchboard design: Supports enclosure configurations incorporating suitable internal segregation components.
- Professional electrical cabinet construction: Suitable for compatible industrial and commercial distribution assemblies.
Key Features
- Manufacturer: ABB.
- Product designation: PTBS8030.
- ABB order code: 1STQ008493A0000.
- Product family: System pro E power.
- Accessory type: Vertical lateral segregation panel.
- Panel configuration: Blind.
- Segregation orientation: Vertical.
- Segregation arrangement: Lateral.
- Nominal height: 800 mm.
- Nominal depth: 300 mm.
- Manufacturer configuration reference: NO IN.UP.
- Compatible enclosure platform: ABB System pro E power.
- Primary application: Internal partitioning of compatible low-voltage switchgear assemblies.
Reliable Blind Vertical Segregation for Electrical Distribution Cabinets
Internal segregation is an important consideration when designing low-voltage electrical switchgear assemblies. Depending on the switchboard arrangement, barriers and partitions can be used to establish separation between equipment compartments, cable areas, busbar spaces and other designated internal sections. Correct selection and positioning of these components contribute to an organised and maintainable enclosure layout.
The ABB PTBS8030 is specified as a vertical lateral segregation panel with a blind arrangement. Unlike a partition incorporating a designated opening, a blind panel provides a continuous covering across its intended partition area. This can be useful where the enclosure design requires separation without a planned passage through that particular component.
With a nominal 800 mm height and 300 mm depth, the PTBS8030 is intended for a defined System pro E power enclosure configuration. These dimensions should be matched to the corresponding cabinet structure and segregation layout rather than treated as universal dimensions for other enclosure systems.
The NO IN.UP. reference forms part of ABB's abbreviated manufacturer description. It identifies a specific configuration detail, but its exact meaning and associated installation requirements should be confirmed using the applicable ABB technical documentation.
The ABB System pro E power platform supports modular construction of low-voltage electrical distribution switchboards. Its range of enclosure frames, mounting components, panels and internal segregation accessories allows panel builders to coordinate equipment positioning and compartment layouts according to the requirements of the complete electrical assembly.
Although blind segregation panels can contribute to internal compartment separation, the PTBS8030 does not independently establish a particular IEC 61439 form of separation, electrical insulation rating, ingress protection classification or arc-fault performance level. Such characteristics depend on the design, installation and verification of the complete switchgear assembly.
Before installation, verify the panel's compatibility with the intended cabinet, its mounting position, fixing arrangements and any complementary segregation accessories. Installation should follow the relevant ABB instructions and applicable electrical safety requirements.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Industrial main electrical distribution boards.
- Commercial and industrial sub-distribution cabinets.
- Switchgear enclosures requiring blind vertical lateral segregation.
- Modular electrical cabinets with designated internal compartments.
- Electrical distribution assemblies incorporating equipment and cable-area partitions.
- Compatible enclosure configurations requiring an 800 mm nominal segregation height.
- System pro E power cabinet arrangements specified for a 300 mm nominal depth.
- OEM switchboard manufacturing and professional electrical panel-building projects.
- Replacement or refurbishment of compatible ABB internal segregation components.
Technical Specifications
| Brand | ABB |
|---|---|
| Product range | System pro E power |
| Product designation | PTBS8030 |
| Manufacturer part number | 1STQ008493A0000 |
| Manufacturer description | SEGR.VER.LAT.NO IN.UP. H800 D300 BLIND |
| Product category | Electrical enclosure segregation accessories |
| Component type | Blind vertical lateral segregation panel |
| Segregation orientation | Vertical |
| Segregation position | Lateral |
| Panel arrangement | Blind |
| Nominal height | 800 mm |
| Nominal depth | 300 mm |
| Manufacturer configuration reference | NO IN.UP. |
| Compatible enclosure system | ABB System pro E power |
| Primary function | Internal lateral compartment separation |
| Intended application | Low-voltage switchgear and electrical distribution assemblies |
| Installation requirement | Compatible cabinet structure and associated segregation components |
Frequently Asked Questions
What is the ABB PTBS8030 1STQ008493A0000 used for?
The ABB PTBS8030 is a blind vertical lateral segregation panel designed for compatible ABB System pro E power low-voltage switchgear enclosures. It supports internal separation between designated areas of an electrical distribution cabinet.
What are the specified dimensions of the ABB PTBS8030?
The PTBS8030 has a nominal 800 mm height and 300 mm depth. The complete physical dimensions, fixing positions and installation requirements should be checked against the relevant ABB documentation.
What does blind vertical lateral segregation mean?
Blind vertical lateral segregation describes a vertically arranged internal partition intended to separate designated lateral areas of a switchgear enclosure without a planned opening through the panel. Its exact position and function depend on the complete cabinet design.
What does NO IN.UP. mean in the ABB PTBS8030 description?
NO IN.UP. is a manufacturer configuration reference included in the abbreviated ABB product description. Its precise meaning and any associated compatibility requirements should be confirmed using the relevant System pro E power technical documentation.
Does the ABB PTBS8030 provide a complete IEC 61439 form of separation?
The PTBS8030 is an individual internal segregation accessory, not a complete verified separation system. The form of internal separation achieved depends on the entire switchgear assembly, including other barriers, partitions, equipment arrangements and applicable design verification.
Trusted by Industrial Panel Builders and Electrical Engineers
ABB System pro E power segregation accessories support professional low-voltage switchgear construction through coordinated internal partitioning solutions, helping electrical panel builders develop organised cabinet layouts, defined equipment compartments and compatible distribution assemblies.
