Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTVS1030 (1STQ008488A0000) is a pre-cut vertical side segregation panel for System pro E power switchboards without intermediate uprights, measuring 1000 mm high and 300 mm deep with pre-cut sections at 50 mm intervals.
£77.15
The ABB PTVS1030, manufacturer order code 1STQ008488A0000, is a purpose-designed pre-cut vertical side segregation panel for low-voltage electrical distribution switchboards. Part of the ABB System pro E power series, this internal partition is designed to separate adjacent functional areas within compatible switchboard structures, supporting organised electrical equipment installation and internal compartment segregation.
Specifically developed for switchboard structures without an intermediate upright, the PTVS1030 is installed between the front and rear structural uprights. It is particularly suitable for configurations incorporating fixed circuit breakers that do not require an intermediate upright, providing a dedicated vertical partition between adjacent switchboard sections.
With a nominal height of 1000 mm and depth of 300 mm, the PTVS1030 incorporates pre-cut sections at 50 mm intervals to facilitate the required installation arrangement. The panel is designed for use in compatible ABB System pro E power assemblies where internal separation, structured cable routing and appropriate switchboard compartmentalisation are important design considerations.
The ABB PTVS1030 is designed to provide vertical side separation within compatible System pro E power switchboard structures. Internal segregation helps establish defined boundaries between functional areas of an electrical distribution assembly, supporting organised equipment layouts and the implementation of the required switchboard separation arrangement.
The panel is specifically intended for structures where the front and rear structural uprights provide the mounting arrangement without an additional intermediate upright. This configuration is commonly associated with fixed circuit breaker installations that do not require an intermediate supporting member.
The pre-cut sections at 50 mm intervals allow the partition to be adapted during assembly. ABB specifies that at least three vertical pre-cut sections must be removed when installing this type of segregation panel. Any additional openings and the final partition configuration should follow the applicable ABB assembly instructions and the requirements of the complete switchboard design.
The PTVS1030 forms part of the internal segregation system rather than the external enclosure covering. The final degree of enclosure protection, form of internal separation and electrical performance depend on the complete System pro E power assembly, including the selected partitions, circuit breakers, busbars and associated installation components.
| Product group | System pro E power |
|---|---|
| Series | System pro E power Segregation Accessories |
| Model / type | PTVS1030 |
| ABB order code | 1STQ008488A0000 |
| Product type | Vertical side segregation panel |
| Component category | Internal switchboard partition / segregation accessory |
| Segregation configuration | Pre-cut vertical lateral partition |
| Nominal height | 1000 mm |
| Nominal depth | 300 mm |
| Pre-cut spacing | 50 mm |
| Minimum vertical pre-cut sections to remove | 3 |
| Installation orientation | Vertical |
| Mounting position | Between front and rear structural uprights |
| Intermediate upright requirement | Not required |
| Suitable circuit breaker arrangement | Fixed circuit breaker configurations without an intermediate upright |
| Compatible enclosure system | ABB System pro E power |
| Application | Internal segregation of low-voltage electrical switchboards |
| Package quantity | 1 piece |
The ABB PTVS1030 is a pre-cut vertical side segregation panel used to separate internal areas within compatible ABB System pro E power low-voltage electrical switchboards.
The PTVS1030 has a nominal height of 1000 mm and a nominal depth of 300 mm, making it suitable for corresponding System pro E power switchboard structures.
No. The PTVS1030 is specifically designed for structures without an intermediate upright. It mounts between the front and rear structural uprights and is suitable for compatible fixed circuit breaker arrangements.
The pre-cut sections are arranged at a 50 mm pitch to allow the partition to be adapted during installation. ABB specifies that at least three vertical pre-cut sections must be removed when assembling this type of segregation panel.
No. The PTVS1030 is an internal segregation accessory, not an external enclosure panel. The final enclosure protection rating and form of internal separation depend on the complete ABB System pro E power switchboard configuration and correct installation of all associated components.
ABB System pro E power segregation accessories are designed to support electrical engineers, industrial contractors and switchboard manufacturers in constructing organised and dependable low-voltage distribution assemblies. The PTVS1030 provides a dedicated pre-cut vertical side partition for 1000 mm high, 300 mm deep switchboard sections without intermediate uprights, supporting consistent internal segregation and professional panel construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.