Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTVS8030 is a System pro E power vertical lateral segregation accessory specified for 800 mm height and 300 mm depth with NO IN.UP. and PRE-C configuration designations for compatible low-voltage switchboard assemblies.
£63.60
The ABB PTVS8030, order code 1STQ008487A0000, is a specialised vertical lateral segregation accessory designed for the ABB System pro E power low-voltage switchboard system. This component is specified for an 800 mm height and a 300 mm depth, with the manufacturer's additional PRE-C configuration designation. It supports the construction of compartmentalised electrical distribution assemblies where organised internal separation and compatible mechanical integration are required.
As part of ABB's modular System pro E power range, the PTVS8030 provides a dedicated solution for vertical lateral separation within compatible switchboard structures. Its segregation function helps establish physical boundaries between designated internal areas, supporting structured equipment layouts and the separation of electrical components according to the switchboard design.
The product's manufacturer description, SEGR.VER.LAT.NO IN.UP. H800 D300+PRE-C., identifies a vertical lateral segregation configuration with an additional specified arrangement. The NO IN.UP. and PRE-C designations should be matched to the corresponding ABB assembly documentation rather than interpreted as interchangeable with other segregation variants.
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards used in industrial facilities, commercial buildings and infrastructure installations. Internal segregation accessories form part of the overall switchboard architecture, helping panel builders create designated equipment spaces and maintain separation between selected areas of an assembly.
The ABB PTVS8030 is intended for vertical lateral segregation in a compatible switchboard configuration with an 800 mm height and 300 mm depth. Its dimensions and arrangement must correspond to the selected enclosure structure, internal components and applicable segregation layout.
Internal segregation can support electrical switchboard design by establishing physical boundaries between selected functional areas. Depending on the complete assembly, such separation may contribute to the organisation of protective devices, busbar compartments, cable spaces and other internal equipment. The actual separation achieved depends on the complete arrangement of partitions, barriers, supports and adjacent components.
The NO IN.UP. and PRE-C designations identify particular aspects of the manufacturer's specified configuration. Because these abbreviations do not independently establish the complete assembly arrangement, compatibility should be checked against the relevant ABB System pro E power technical documentation before installation.
The PTVS8030 should be treated as a system-specific segregation component, not as a complete compartment or a standalone electrical protective device. Any required form of internal separation under BS EN IEC 61439 must be established and verified for the finished switchboard assembly. The installation of this accessory alone does not determine the assembly's form of separation, IP rating or electrical performance.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ008487A0000 |
| Product group | System Pro E Power |
| Product type | Vertical lateral segregation accessory |
| Segregation orientation | Vertical |
| Segregation arrangement | Lateral |
| Specified height | 800 mm |
| Specified depth | 300 mm |
| Configuration designation | NO IN.UP. |
| Additional configuration | PRE-C |
| Manufacturer description | SEGR.VER.LAT.NO IN.UP. H800 D300+PRE-C. |
| Installation application | Internal switchboard segregation |
| System compatibility | ABB System pro E power |
| Equipment application | Low-voltage electrical distribution assemblies |
The ABB PTVS8030 is a vertical lateral segregation accessory designed for compatible ABB System pro E power low-voltage switchboards. It supports internal separation and compartment organisation within the specified assembly configuration.
The PTVS8030 is specified for a nominal height of 800 mm and depth of 300 mm. These dimensions should be matched to the corresponding ABB System pro E power switchboard configuration.
Vertical lateral segregation refers to a physical separation arrangement within a switchboard, intended to establish boundaries between designated internal areas. The precise installation position and separation achieved depend on the complete switchboard design.
NO IN.UP. and PRE-C are manufacturer configuration designations included in the ABB product description. Their precise application should be established from the relevant ABB System pro E power installation documentation to ensure selection of the correct segregation arrangement.
No. The PTVS8030 is an individual segregation accessory. The finished switchboard's form of internal separation depends on the complete arrangement of compatible barriers, partitions, compartments and associated components, together with the applicable assembly verification requirements.
ABB System pro E power accessories support the construction of modular low-voltage electrical switchboards with organised internal layouts. The ABB PTVS8030 provides a dedicated vertical lateral segregation solution for compatible 800 mm high and 300 mm deep configurations, helping panel builders integrate manufacturer-specific separation components into professional electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.