Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVFE1263 is a System pro E power vertical installation kit for two compatible Emax 2 E1.2W or Tmax XT7 W-MO 3-pole or 4-pole circuit breaker positions in a 1000 mm wide low-voltage switchboard section.
£427.01
The ABB PVFE1263, order code 1STQ008486A0000, is a dedicated vertical circuit breaker installation kit designed for the ABB System pro E power low-voltage switchboard system. This specialised accessory is configured for two ABB Emax 2 E1.2W or Tmax XT7 W-MO circuit breaker installation positions, supporting 3-pole and 4-pole configurations within compatible switchboard sections measuring 1000 mm wide.
As part of ABB's modular System pro E power range, the PVFE1263 provides a purpose-designed solution for integrating compatible E1.2W and XT7 W-MO circuit breaker equipment into electrical distribution assemblies. Its vertical mounting orientation supports structured positioning of protective devices, while its dual-device arrangement is intended for switchboard layouts requiring two compatible circuit breaker positions.
The kit is specified for 3-pole and 4-pole configurations and carries the manufacturer's W-MO designation for the relevant XT7 installation arrangement. Designed for 1000 mm wide switchboard sections, the PVFE1263 supports modular switchboard construction where equipment integration, accessibility and compatibility with the selected circuit breaker mounting systems are essential.
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards used in industrial facilities, commercial buildings and infrastructure installations. Dedicated installation kits such as the PVFE1263 help electrical panel builders position compatible protective devices within switchboard structures according to the specified mechanical configuration.
The ABB PVFE1263 is designed for a two-position vertical circuit breaker arrangement within a compatible 1000 mm wide switchboard section. Its product designation identifies compatibility with E1.2W and XT7 W-MO configurations, allowing the kit to be considered for switchboard designs incorporating the specified ABB circuit breaker equipment.
The ABB Emax 2 E1.2W belongs to ABB's Emax 2 air circuit breaker family, which is used in low-voltage power distribution systems. The ABB Tmax XT7 belongs to the Tmax XT moulded case circuit breaker range. Both product families provide electrical protection functions according to their selected circuit breaker versions, trip units and accessories.
The PVFE1263 is an installation accessory rather than a complete circuit breaker assembly. Circuit breakers, withdrawable parts, motor operating equipment, electrical connections and other components must be selected according to the applicable ABB configuration requirements. The W-MO designation should be matched to the specified XT7 arrangement rather than assumed to indicate that a motor operator is supplied with the kit.
Correct integration requires verification of the selected circuit breaker versions, mounting arrangements, electrical clearances, connection systems and switchboard assembly requirements. Using a dedicated ABB installation kit supports consistent mechanical positioning while helping panel builders maintain compatibility within the System pro E power platform.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ008486A0000 |
| Product group | System Pro E Power |
| Product type | Vertical circuit breaker installation kit |
| Compatible circuit breaker family | ABB Emax 2 E1.2W |
| Additional compatible circuit breaker family | ABB Tmax XT7 W-MO |
| Circuit breaker installation positions | 2 |
| Supported pole configurations | 3-pole / 4-pole |
| Mounting orientation | Vertical |
| XT7 configuration designation | W-MO |
| Compatible switchboard section width | 1000 mm |
| System compatibility | ABB System pro E power |
| Equipment family | Low-voltage circuit breakers |
| Application | Low-voltage electrical distribution switchboards |
The ABB PVFE1263 is a vertical installation kit designed for a two-position arrangement of compatible ABB Emax 2 E1.2W or Tmax XT7 W-MO circuit breaker equipment within System pro E power low-voltage switchboards.
The kit is specified for ABB Emax 2 E1.2W and ABB Tmax XT7 W-MO configurations. The selected circuit breaker versions and associated mounting components must match the manufacturer's installation requirements.
The PVFE1263 is specified as a kit for two circuit breaker installation positions. The supported device combination and associated mounting equipment must be verified against the applicable ABB System pro E power configuration documentation.
The installation kit is designed for compatible ABB System pro E power switchboard sections with a nominal width of 1000 mm.
Yes. The PVFE1263 is specified for 3-pole and 4-pole configurations with a vertical mounting orientation. The selected circuit breaker and installation accessories must correspond to the appropriate ABB E1.2W or XT7 W-MO arrangement.
ABB System pro E power installation accessories support the construction of modular low-voltage electrical switchboards. The ABB PVFE1263 provides a dedicated two-position vertical installation solution for compatible Emax 2 E1.2W and Tmax XT7 W-MO circuit breaker configurations, supporting 3-pole and 4-pole equipment within 1000 mm wide switchboard sections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.