Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVDT5612 1STQ008481A0000 is a System pro E power vertical installation kit designed for two Tmax T5 three-pole or four-pole withdrawable circuit breaker positions with motorised operating arrangements in an 800 mm wide enclosure section.
£223.16
The ABB PVDT5612 (1STQ008481A0000) is a dedicated dual Tmax T5 withdrawable motorised circuit breaker installation kit designed for vertical installation within compatible ABB System pro E power low-voltage switchgear enclosures. This accessory supports the integration of two ABB Tmax T5 moulded case circuit breaker positions in three-pole or four-pole configurations, with provision for compatible motor operating arrangements.
Part of the ABB System pro E power range, the PVDT5612 provides a coordinated installation solution for electrical panel builders incorporating withdrawable, motor-operated circuit breakers into modular power distribution cabinets. Its vertical installation arrangement supports organised equipment positioning while accommodating the mechanical and operational requirements of compatible Tmax T5 circuit breaker assemblies.
Designed for a 800 mm nominal installation width, the ABB PVDT5612 is specified for two Tmax T5 circuit breaker positions in a 3P or 4P withdrawable motorised configuration. It is intended for professional switchgear construction where equipment accessibility, correct mechanical integration and compatibility with the complete electrical distribution assembly are essential.
Moulded case circuit breakers are important protective devices in industrial and commercial low-voltage distribution systems. Depending on their selected ratings and protection units, they provide overload and short-circuit protection for electrical circuits and connected equipment. Correct installation within a switchgear enclosure is essential for mechanical support, electrical connections, operating access and compatibility with the complete distribution assembly.
The ABB PVDT5612 is specifically configured for two ABB Tmax T5 circuit breaker positions in a vertical withdrawable motorised installation arrangement. Its compatibility with three-pole and four-pole versions supports panel builders constructing distribution assemblies that require the specified T5 installation format.
A withdrawable circuit breaker arrangement uses compatible mechanical and electrical connection components to allow the breaker to be moved between designated operating or maintenance positions, depending on the equipment design. This arrangement can facilitate inspection, servicing and replacement when performed by qualified personnel in accordance with ABB instructions and applicable electrical safety procedures.
Motorised circuit breaker operation allows compatible switching functions to be performed through an electrical control arrangement. Depending on the selected Tmax T5 motor operator and associated control accessories, this may support remote switching or integration with electrical control systems. The actual functions available depend on the specific circuit breaker and operating mechanism selected.
The ABB Tmax T5 belongs to the Tmax moulded case circuit breaker family used in low-voltage electrical distribution applications. Suitable T5 versions may incorporate different protection units, current ratings, breaking capacities and operating accessories. These electrical characteristics are determined by the selected circuit breakers and are not ratings of the PVDT5612 installation kit.
The 800 mm nominal installation width identifies the System pro E power enclosure section for which the kit is specified. Its vertical configuration must be coordinated with the selected circuit breakers, withdrawal components, motor operators, electrical connections and required installation clearances.
The PVDT5612 is an installation kit rather than a complete motorised circuit breaker assembly. The Tmax T5 circuit breakers, compatible withdrawal mechanisms, motor operators and any additional electrical or auxiliary accessories must be selected according to the intended application. Exact package contents and compatibility with individual T5 configurations should be confirmed against the relevant ABB documentation.
| Brand | ABB |
|---|---|
| Product range | System pro E power |
| Product designation | PVDT5612 |
| Manufacturer part number | 1STQ008481A0000 |
| Manufacturer description | 2 T5 KIT 3-4P WITH. MOT VERT.W=800MM |
| Product category | Circuit breaker installation accessories |
| Component type | Dual MCCB installation kit |
| Compatible circuit breaker family | ABB Tmax T5 |
| Number of circuit breaker positions | 2 |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting execution | Withdrawable |
| Operating mechanism arrangement | Motorised |
| Installation orientation | Vertical |
| Nominal installation width | 800 mm |
| Compatible enclosure system | ABB System pro E power |
| Primary function | Installation of two compatible Tmax T5 withdrawable circuit breaker arrangements with motorised operation |
| Intended application | Low-voltage electrical distribution and switchgear assemblies |
The ABB PVDT5612 is an installation kit designed to accommodate two ABB Tmax T5 withdrawable motorised circuit breaker positions in a vertical arrangement within compatible System pro E power low-voltage switchgear enclosures.
The PVDT5612 is specified for ABB Tmax T5 moulded case circuit breakers in three-pole or four-pole withdrawable configurations with compatible motor operating arrangements. The exact breaker, withdrawal mechanism and motor operator combination should be verified against ABB installation documentation.
The ABB PVDT5612 is a dual-position installation kit designed for two compatible Tmax T5 circuit breaker arrangements. The complete installation must use suitably selected circuit breakers and associated withdrawal and motor operating components.
The kit is specified for a 800 mm nominal installation width and vertical mounting orientation within compatible ABB System pro E power enclosure configurations. Other cabinet dimensions, mounting requirements and installation clearances must be checked separately.
The PVDT5612 is identified as a circuit breaker installation kit, not a complete motorised circuit breaker assembly. The Tmax T5 circuit breakers, withdrawal mechanisms, motor operators and any additional required accessories should be specified separately unless their inclusion is explicitly confirmed in the supplier's package contents.
ABB System pro E power installation accessories support professional low-voltage switchgear construction through coordinated arrangements for compatible Tmax circuit breakers, helping panel builders create organised electrical distribution cabinets with suitable withdrawable mounting, motorised operation and maintenance accessibility.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.