Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008480B0000 ABB IP65 Open Bottom Panel 2mm 800 (600+200) x 900mm CC System pro E power
ABB 1STQ008480B0000 is a 2 mm thick open bottom panel for compatible System pro E power IP65 enclosure configurations, featuring an 800 mm overall width in a 600 mm plus 200 mm arrangement, a 900 mm nominal depth and the manufacturer’s CC designation.
£292.55
Why Choose the ABB 1STQ008480B0000 IP65 Open Bottom Panel?
The ABB 1STQ008480B0000 is a 2 mm thick IP65 open bottom enclosure panel designed for compatible ABB System pro E power low-voltage switchgear cabinets. Featuring a nominal 800 mm overall width in a 600 mm + 200 mm sectional configuration and a 900 mm depth, this accessory supports the construction of modular electrical distribution enclosures requiring an open bottom arrangement.
Part of the ABB System pro E power range, the panel is intended for the bottom section of compatible switchgear enclosures, where suitable cable-entry or enclosure completion arrangements are required. Its open design provides flexibility for routing incoming and outgoing electrical cables while accommodating appropriately selected sealing and closure components.
The manufacturer's description identifies the panel as 2MM IP65 OPEN BOT. W800(600+200) D900CC. The CC designation forms part of the specified product configuration and should be matched to the relevant ABB enclosure documentation. The panel is intended for IP65 enclosure applications, although the required ingress protection depends on correct installation and completion of the entire cabinet assembly.
Key Advantages
- Designed for IP65 enclosure configurations: Supports compatible electrical cabinets requiring a high degree of protection against dust and water ingress.
- 2 mm thick construction: Provides a substantial enclosure panel for professional low-voltage switchgear applications.
- 800 mm overall nominal width: Designed for the specified ABB System pro E power enclosure arrangement.
- 600 mm + 200 mm sectional configuration: Accommodates the manufacturer's designated combined-width cabinet layout.
- 900 mm nominal depth: Suitable for compatible deep enclosure sections.
- Open bottom design: Provides an opening for appropriately designed cable-entry and enclosure completion arrangements.
- Dedicated bottom installation: Supports planned cable access through the lower section of a switchgear cabinet.
- System pro E power compatibility: Designed for integration into ABB's modular low-voltage enclosure platform.
- Professional panel-building integration: Helps maintain a coordinated enclosure layout when combined with matching structural and sealing components.
Key Features
- Manufacturer: ABB.
- Product family: System pro E power.
- ABB order code: 1STQ008480B0000.
- Manufacturer description: 2MM IP65 OPEN BOT. W800(600+200) D900CC.
- Product type: Open bottom enclosure panel.
- Specified enclosure protection: IP65.
- Material thickness: 2 mm.
- Nominal overall width: 800 mm.
- Width configuration: 600 mm + 200 mm.
- Nominal depth: 900 mm.
- Manufacturer configuration designation: CC.
- Installation position: Bottom of a compatible enclosure.
- Panel arrangement: Open.
- Compatible enclosure platform: ABB System pro E power.
Reliable Open Bottom Enclosure Integration and IP65 Protection
Bottom panels are important components in low-voltage switchgear enclosure construction. They help complete the external cabinet structure while providing an interface for cables entering or leaving the enclosure. An open bottom arrangement is particularly useful where the electrical installation requires cable access from below, such as through floor-level cable routes or appropriately designed cable-entry systems.
The ABB 1STQ008480B0000 is specified for an 800 mm overall width, arranged as 600 mm + 200 mm, and a 900 mm nominal depth. This combined-width configuration should be matched to the corresponding System pro E power cabinet arrangement rather than treated as interchangeable with every standard 800 mm wide enclosure.
Its 2 mm material thickness provides a substantial panel construction for use within the specified modular enclosure system. The open bottom format allows the electrical panel builder to incorporate compatible cable-entry components and other necessary enclosure completion accessories according to the switchboard design.
The IP65 classification denotes dust-tight protection and protection against water jets under the applicable test conditions. However, an open bottom panel does not independently create a sealed IP65 enclosure. The finished assembly must incorporate suitable closure plates, cable glands, gaskets, seals or other compatible components wherever required to maintain the specified protection level.
The CC designation is retained from ABB's manufacturer description and identifies a configuration detail that must be checked against the relevant System pro E power documentation. The exact meaning and associated compatibility requirements should not be assumed from the abbreviated product description alone.
ABB System pro E power provides a modular platform for constructing low-voltage distribution switchboards. Its coordinated enclosure panels, structural components and installation accessories support organised cabinet construction while accommodating different electrical equipment layouts and cable-routing requirements.
Before installation, verify the enclosure's combined-width arrangement, nominal depth, fixing interfaces and required sealing components. The completed electrical assembly should be designed and assessed in accordance with the applicable switchgear safety and enclosure protection requirements.
Typical Applications
- ABB System pro E power low-voltage switchgear enclosures.
- Industrial main distribution boards and power distribution cabinets.
- Electrical enclosures requiring bottom cable-entry arrangements.
- Combined-width switchgear configurations using a 600 mm + 200 mm layout.
- Compatible 900 mm deep electrical cabinet assemblies.
- Industrial and commercial electrical distribution infrastructure.
- Switchgear installations incorporating floor-level cable routes.
- Electrical cabinets designed to achieve IP65 protection using suitable sealing and closure components.
- OEM switchboard manufacturing and professional electrical panel-building projects.
- Replacement or refurbishment of matching ABB System pro E power enclosure panels.
Technical Specifications
| Brand | ABB |
|---|---|
| Product range | System pro E power |
| Manufacturer part number | 1STQ008480B0000 |
| Product category | Electrical enclosure accessories |
| Component type | Open bottom panel |
| Material thickness | 2 mm |
| Nominal overall width | 800 mm |
| Specified width arrangement | 600 mm + 200 mm |
| Nominal depth | 900 mm |
| Specified enclosure protection classification | IP65 |
| Panel configuration | Open bottom |
| Installation location | Enclosure bottom |
| Manufacturer suffix | CC |
| Compatible enclosure system | ABB System pro E power |
| Primary function | Bottom enclosure covering with an open section |
| Intended application | Low-voltage electrical distribution and switchgear assemblies |
| Installation requirement | Compatible enclosure structure and suitable cable-entry, sealing or closure components |
Frequently Asked Questions
What is the ABB 1STQ008480B0000 used for?
The ABB 1STQ008480B0000 is an open bottom enclosure panel designed for compatible ABB System pro E power low-voltage switchgear cabinets. It provides an open lower covering arrangement for the integration of suitable cable-entry or enclosure completion components.
What are the dimensions and thickness of the ABB 1STQ008480B0000?
The panel has a nominal 800 mm overall width, specified as a 600 mm + 200 mm configuration, a nominal 900 mm depth and a 2 mm material thickness.
Does the ABB 1STQ008480B0000 provide IP65 protection?
The panel is specified for IP65 enclosure configurations, but its open bottom arrangement does not independently provide an IP65 seal. The completed enclosure must incorporate suitable cable-entry, sealing and closure components and meet the required ingress protection classification.
What does W800 (600+200) D900CC mean in the ABB product description?
W800 (600+200) identifies an overall nominal width of 800 mm with a 600 mm + 200 mm sectional arrangement. D900 indicates a nominal depth of 900 mm. The CC suffix is a manufacturer configuration designation whose precise compatibility requirements should be checked against ABB documentation.
Can the ABB 1STQ008480B0000 be installed at the top of an enclosure?
The manufacturer's description specifies an open bottom panel. It should therefore be selected for the designated bottom installation position in a compatible ABB System pro E power enclosure. A top installation should not be assumed unless explicitly supported by ABB documentation.
Trusted by Industrial Panel Builders and Electrical Engineers
ABB System pro E power enclosure accessories support professional low-voltage switchgear construction through coordinated modular components, helping panel builders integrate compatible cabinet sections, cable-entry arrangements and enclosure protection measures into practical electrical distribution assemblies.
