Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008479B0000 ABB System Pro E Power IP65 Open Bottom Panel 2mm W800 (600+200) D700 CC
ABB 1STQ008479B0000 System Pro E Power 2 mm thick IP65 open bottom enclosure panel for a nominal 800 mm-wide (600 + 200 mm), 700 mm-deep CC configuration in compatible low-voltage electrical distribution switchboards.
£246.71
Why Choose the ABB 1STQ008479B0000 IP65 Open Bottom Panel for System Pro E Power Switchboards?
The ABB 1STQ008479B0000 is a purpose-designed 2 mm thick IP65 open bottom enclosure panel from the ABB System Pro E Power modular low-voltage switchboard range. Specified for an enclosure arrangement with a nominal width of 800 mm, comprising a 600 mm + 200 mm configuration, and a nominal depth of 700 mm, this component supports the construction of compatible electrical distribution assemblies requiring a dedicated bottom opening arrangement.
Developed for professional electrical panel builders, switchgear manufacturers and industrial power distribution system integrators, the ABB 1STQ008479B0000 provides a specialised enclosure component for System Pro E Power switchboards. Its 2 mm nominal thickness provides a defined mechanical specification, while the IP65 designation identifies its intended use within compatible enclosure systems designed to provide dust-tight protection and resistance to water jets.
The 1STQ008479B0000 is specified as a 2 mm IP65 open bottom panel for an 800 mm-wide (600 + 200 mm), 700 mm-deep CC configuration. The open bottom arrangement is intended to accommodate the corresponding enclosure layout and associated cable entry or installation provisions. The manufacturer's CC designation should be matched to the relevant ABB System Pro E Power assembly configuration to ensure correct component selection.
Key Advantages
- IP65 protection designation: Intended for compatible enclosure systems requiring dust-tight protection and resistance to water jets.
- 2 mm nominal thickness: Provides a defined panel thickness for the specified enclosure configuration.
- Open bottom arrangement: Supports the designated bottom opening configuration within the switchboard assembly.
- 800 mm nominal width: Designed for the specified System Pro E Power enclosure width.
- 600 + 200 mm configuration: Matches the designated combined-width enclosure arrangement.
- 700 mm nominal depth: Supports the corresponding enclosure depth configuration.
- CC configuration designation: Enables selection for the applicable ABB enclosure arrangement.
- Modular system integration: Designed for coordinated installation with compatible System Pro E Power components.
- Cable entry flexibility: Supports switchboard designs requiring a defined bottom opening and appropriately selected cable entry accessories.
- Professional switchboard construction: Provides an application-specific component for industrial and commercial electrical distribution assemblies.
Key Features
- Original ABB System Pro E Power modular switchboard enclosure accessory.
- ABB order code: 1STQ008479B0000.
- Open bottom enclosure panel configuration.
- 2 mm nominal panel thickness.
- IP65 protection designation.
- 800 mm nominal enclosure width.
- 600 mm + 200 mm combined-width configuration.
- 700 mm nominal enclosure depth.
- CC manufacturer configuration designation.
- Designed for compatible low-voltage electrical distribution switchboards.
- Supports enclosure layouts incorporating designated bottom openings.
- Intended for integration with appropriate ABB enclosure structures, mounting components and sealing arrangements.
Technical Specifications
- Manufacturer: ABB
- Product range: System Pro E Power
- ABB order code: 1STQ008479B0000
- Product designation: 2MM IP65 OPEN BOT. W800(600+200) D700CC
- Product type: Open bottom enclosure panel
- Protection designation: IP65
- Nominal panel thickness: 2 mm
- Nominal enclosure width: 800 mm
- Width configuration: 600 + 200 mm
- Nominal enclosure depth: 700 mm
- Nominal enclosure dimensions (W × D): 800 × 700 mm
- Panel arrangement: Open bottom
- Manufacturer configuration designation: CC
- IP65 first characteristic numeral: 6 – dust-tight protection
- IP65 second characteristic numeral: 5 – protection against water jets
- Compatible enclosure system: ABB System Pro E Power
- Installation application: Bottom enclosure panel integration
- Equipment category: Low-voltage electrical switchboard enclosure accessories
- Accessory classification: IP65 open bottom enclosure panel
Reliable Bottom Enclosure Integration and IP65 Protection
The ABB 1STQ008479B0000 open bottom panel is intended for use in compatible System Pro E Power electrical distribution switchboards where a defined bottom opening arrangement is required. Bottom enclosure components play an important role in coordinating the switchboard structure with cable routing, cable entry arrangements and other installation requirements.
The specified 800 mm overall width incorporates a 600 mm + 200 mm configuration, allowing the component to be selected for the corresponding modular enclosure arrangement. Combined-width configurations can support switchboard layouts with separate functional spaces, such as equipment and cable accommodation sections, subject to the exact ABB assembly design.
The 700 mm nominal depth identifies the intended enclosure depth, while the 2 mm panel thickness provides a defined mechanical characteristic for the component. The CC designation is retained from the ABB product specification and should be checked against the applicable System Pro E Power configuration documentation rather than assumed to indicate a particular compartment type.
The IP65 designation relates to protection against dust ingress and water jets under the classification system defined by IEC/EN 60529. However, an open bottom arrangement requires particular attention to the completed enclosure's cable entry and sealing provisions. An unsealed opening cannot independently provide IP65 protection. The required ingress protection level depends on the complete assembly, including any compatible bottom closing components, cable glands, seals and other installation accessories.
The 1STQ008479B0000 is a mechanical enclosure accessory rather than an electrical protective device. Its correct application depends on compatibility with the selected System Pro E Power enclosure structure and the overall switchboard design. Installation and assembly verification should follow ABB's applicable instructions and relevant IEC/EN 61439 requirements.
Typical Applications
- ABB System Pro E Power modular low-voltage switchboards.
- Electrical distribution enclosures requiring compatible open bottom arrangements.
- Industrial main and sub-distribution switchboards.
- Commercial and industrial power distribution assemblies.
- Switchboard configurations with an 800 mm overall width.
- Modular enclosure arrangements incorporating 600 + 200 mm width sections.
- Electrical distribution cabinets with a nominal depth of 700 mm.
- Switchboard designs requiring appropriately sealed bottom cable entry provisions.
- Compatible IP65 enclosure assemblies using dedicated bottom panel components.
- OEM switchgear manufacturing and professional electrical panel building.
- Switchboard construction and refurbishment using compatible ABB System Pro E Power accessories.
Frequently Asked Questions
What is the ABB 1STQ008479B0000 used for?
The ABB 1STQ008479B0000 is a 2 mm thick IP65 open bottom enclosure panel designed for compatible ABB System Pro E Power low-voltage switchboards. It is specified for an 800 mm-wide (600 + 200 mm), 700 mm-deep enclosure configuration with the manufacturer's CC designation.
What are the dimensions and thickness of the ABB 1STQ008479B0000?
The panel is specified with a nominal thickness of 2 mm, an enclosure width of 800 mm arranged as 600 + 200 mm, and a nominal enclosure depth of 700 mm.
What does W800(600+200) D700CC mean in the product specification?
W800(600+200) identifies an overall nominal enclosure width of 800 mm formed by a 600 mm + 200 mm configuration. D700 identifies a nominal enclosure depth of 700 mm. CC is the manufacturer's configuration designation and should be matched to the relevant ABB System Pro E Power assembly documentation.
Can an open bottom panel provide IP65 protection?
The 1STQ008479B0000 carries an IP65 designation for its intended enclosure configuration, but an open bottom must be appropriately completed and sealed to achieve the required protection level. The completed switchboard's ingress protection depends on compatible cable entry components, seals and the full enclosure assembly.
Which ABB enclosure system is compatible with the 1STQ008479B0000?
The 1STQ008479B0000 belongs to the ABB System Pro E Power modular switchboard range. It is intended for compatible enclosure structures requiring a 2 mm thick IP65 open bottom panel with an 800 mm (600 + 200 mm) width configuration, 700 mm depth and CC designation.
Designed for Professional Electrical Switchboard Builders
ABB System Pro E Power enclosure accessories provide purpose-designed solutions for constructing coordinated, modular low-voltage electrical distribution assemblies. The ABB 1STQ008479B0000 offers a dedicated 2 mm thick IP65 open bottom panel for an 800 mm-wide (600 + 200 mm), 700 mm-deep CC enclosure configuration, supporting professional switchboard construction and the integration of appropriately designed bottom cable entry arrangements.
