1STQ008478B0000 ABB System Pro E Power IP65 Open Bottom Panel 2mm W800 (600+200) D500 CC

Why Choose the ABB 1STQ008478B0000 IP65 Open Bottom Panel for System Pro E Power Switchboards?

The ABB 1STQ008478B0000 is a purpose-designed 2 mm thick IP65 open bottom enclosure panel from the ABB System Pro E Power modular low-voltage switchboard range. Specified for an enclosure arrangement with a nominal width of 800 mm, comprising a 600 mm + 200 mm configuration, and a nominal depth of 500 mm, this component supports the construction of compatible electrical distribution assemblies requiring a dedicated bottom opening arrangement.

Developed for professional electrical panel builders, switchgear manufacturers and industrial power distribution system integrators, the ABB 1STQ008478B0000 provides an application-specific enclosure component for System Pro E Power switchboards. Its 2 mm nominal thickness provides a defined mechanical specification, while the IP65 designation identifies its intended use within compatible enclosure systems designed to provide dust-tight protection and resistance to water jets.

The 1STQ008478B0000 is specified as a 2 mm IP65 open bottom panel for an 800 mm-wide (600 + 200 mm), 500 mm-deep CC configuration. The open bottom arrangement accommodates the corresponding enclosure layout and allows for appropriately designed cable entry or installation provisions. The manufacturer's CC designation should be matched to the relevant ABB System Pro E Power assembly configuration when selecting compatible components.

Key Advantages

• IP65 protection designation: Intended for compatible enclosure assemblies requiring dust-tight protection and resistance to water jets.
• 2 mm nominal thickness: Provides a defined panel thickness for the specified switchboard configuration.
• Open bottom arrangement: Supports the designated bottom opening configuration within the enclosure assembly.
• 800 mm nominal width: Designed for the corresponding System Pro E Power enclosure width.
• 600 + 200 mm configuration: Matches the specified combined-width modular enclosure arrangement.
• 500 mm nominal depth: Suitable for the corresponding enclosure depth configuration.
• CC configuration designation: Supports accurate selection for the applicable ABB switchboard arrangement.
• Modular system integration: Designed for coordinated installation with compatible System Pro E Power enclosure components.
• Cable entry accommodation: Supports switchboard designs requiring a defined bottom opening and suitable cable entry provisions.
• Professional switchboard construction: Provides an application-specific component for industrial and commercial electrical distribution assemblies.

Key Features

• Original ABB System Pro E Power modular switchboard enclosure accessory.
• ABB order code: 1STQ008478B0000.
• Open bottom enclosure panel configuration.
• 2 mm nominal panel thickness.
• IP65 protection designation.
• 800 mm nominal enclosure width.
• 600 mm + 200 mm combined-width configuration.
• 500 mm nominal enclosure depth.
• CC manufacturer configuration designation.
• Designed for compatible low-voltage electrical distribution switchboards.
• Supports enclosure arrangements incorporating designated bottom openings.
• Intended for integration with appropriate ABB mounting components, enclosure structures and sealing accessories.

Technical Specifications

• Manufacturer: ABB
• Product range: System Pro E Power
• ABB order code: 1STQ008478B0000
• Product designation: 2MM IP65 OPEN BOT. W800(600+200) D500CC
• Product type: Open bottom enclosure panel
• Protection designation: IP65
• Nominal panel thickness: 2 mm
• Nominal enclosure width: 800 mm
• Width configuration: 600 + 200 mm
• Nominal enclosure depth: 500 mm
• Nominal enclosure dimensions (W × D): 800 × 500 mm
• Panel arrangement: Open bottom
• Manufacturer configuration designation: CC
• IP65 first characteristic numeral: 6 – dust-tight protection
• IP65 second characteristic numeral: 5 – protection against water jets
• Compatible enclosure system: ABB System Pro E Power
• Installation application: Bottom enclosure panel integration
• Equipment category: Low-voltage electrical switchboard enclosure accessories
• Accessory classification: IP65 open bottom enclosure panel

Reliable Bottom Enclosure Integration and IP65 Protection

The ABB 1STQ008478B0000 open bottom panel is intended for compatible System Pro E Power electrical distribution switchboards where a defined bottom opening arrangement is required. Bottom enclosure components are important elements of modular switchboard construction because they help coordinate the enclosure structure with cable routing, cable entry provisions and other installation requirements.

The specified 800 mm overall width incorporates a 600 mm + 200 mm configuration. This combined-width designation allows the panel to be selected for the corresponding modular enclosure arrangement. Such configurations may accommodate separate functional spaces within a switchboard, subject to the exact ABB assembly design and the selected compartment arrangement.

The 500 mm nominal depth identifies the intended enclosure depth, while the 2 mm panel thickness provides a defined mechanical characteristic for the component. The manufacturer's CC designation is retained from the product specification and should be checked against the applicable System Pro E Power configuration documentation rather than assumed to identify a particular compartment type.

The IP65 designation relates to protection against dust ingress and water jets under the classification system defined by IEC/EN 60529. The first characteristic numeral, 6, identifies dust-tight protection, while the second numeral, 5, identifies protection against water jets. IP65 does not imply suitability for immersion or unrestricted high-pressure cleaning.

Because this component is specified with an open bottom arrangement, the completed enclosure's ingress protection depends on the correct treatment of the bottom opening. Suitable cable entry components, closing elements, gaskets and seals must be selected and installed as required by the switchboard design. An unsealed opening cannot independently maintain IP65 protection.

The 1STQ008478B0000 is a mechanical enclosure accessory rather than an electrical protective device. Its correct application depends on compatibility with the selected System Pro E Power enclosure structure and the overall switchboard design. Installation and assembly verification should follow ABB's applicable instructions and relevant IEC/EN 61439 requirements.

Typical Applications

• ABB System Pro E Power modular low-voltage switchboards.
• Electrical distribution enclosures requiring compatible open bottom arrangements.
• Industrial main and sub-distribution switchboards.
• Commercial and industrial electrical power distribution assemblies.
• Switchboard configurations with an 800 mm overall width.
• Modular enclosure arrangements incorporating 600 + 200 mm width sections.
• Electrical distribution cabinets with a nominal depth of 500 mm.
• Switchboard designs requiring appropriately sealed bottom cable entry provisions.
• Compatible IP65 enclosure assemblies using dedicated bottom panel components.
• OEM switchgear manufacturing and professional electrical panel building.
• Switchboard construction and refurbishment using compatible ABB System Pro E Power accessories.