Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008476A0000 ABB PHCX1105 System pro E power XT1 3-4P Fixed RHD Horizontal Installation Kit W600 mm
ABB PHCX1105 is a System pro E power horizontal fixed installation kit for ABB Tmax XT1 3-pole or 4-pole circuit breakers with an RHD configuration designation, designed for compatible 600 mm wide low-voltage switchboard sections.
£132.08
Why Choose the ABB PHCX1105 System pro E power XT1 Fixed RHD Horizontal Installation Kit?
The ABB PHCX1105, order code 1STQ008476A0000, is a dedicated horizontal fixed circuit breaker installation kit designed for the ABB System pro E power low-voltage switchboard system. This installation accessory is specifically configured for ABB Tmax XT1 moulded case circuit breakers in 3-pole or 4-pole configurations, with a fixed mounting arrangement, an RHD configuration designation and compatibility with switchboard sections measuring 600 mm wide.
As part of ABB's modular System pro E power range, the PHCX1105 provides a purpose-designed installation solution for incorporating Tmax XT1 circuit breakers into electrical distribution assemblies. Its horizontal mounting orientation supports organised equipment positioning, while the fixed installation configuration provides a stable arrangement for circuit breakers intended to remain mechanically secured within the switchboard during normal operation.
Designed for 3-pole and 4-pole ABB Tmax XT1 circuit breakers, the PHCX1105 is suitable for electrical panel builders requiring a system-compatible mounting solution for industrial and commercial low-voltage distribution installations. The kit's specified RHD configuration and 600 mm nominal switchboard width should be matched to the corresponding ABB installation arrangement and selected circuit breaker accessories.
Key Advantages
- Designed specifically for the ABB System pro E power modular switchboard system.
- Provides a dedicated installation arrangement for ABB Tmax XT1 moulded case circuit breakers.
- Supports 3-pole and 4-pole circuit breaker configurations.
- Fixed mounting configuration supports secure installation of compatible protective devices.
- Horizontal mounting orientation facilitates organised switchboard equipment layouts.
- Specified with an RHD configuration designation for the corresponding installation arrangement.
- Designed for compatible 600 mm wide switchboard sections.
- Supports structured integration of protective devices within modular electrical distribution assemblies.
- System-specific design helps panel builders select compatible mounting components.
- Suitable for industrial, commercial and infrastructure electrical distribution applications.
Key Features
- ABB System pro E power switchboard installation accessory.
- PHCX1105 manufacturer model designation.
- ABB Tmax XT1 circuit breaker compatibility.
- 3-pole and 4-pole installation support.
- Fixed circuit breaker mounting configuration.
- RHD configuration designation as specified for this installation kit.
- Horizontal circuit breaker mounting arrangement.
- 600 mm nominal compatible switchboard section width.
- Designed for integration with compatible ABB System pro E power switchboard structures.
- Suitable for modular low-voltage electrical distribution and switchgear assemblies.
Reliable Horizontal XT1 Circuit Breaker Integration
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards used in industrial facilities, commercial buildings and infrastructure installations. Dedicated installation kits such as the PHCX1105 help integrate compatible protective devices into switchboard structures according to the required mounting configuration, equipment layout and assembly design.
The ABB PHCX1105 is configured for horizontal installation of ABB Tmax XT1 circuit breakers within a compatible 600 mm wide switchboard section. Its fixed mounting arrangement is intended for applications requiring a circuit breaker to be securely installed in its designated position rather than using a plug-in or withdrawable mounting system.
ABB Tmax XT1 moulded case circuit breakers are used in low-voltage electrical distribution systems to provide circuit protection. Depending on the selected breaker and trip unit, protection functions may include overload and short-circuit protection. The PHCX1105 provides the specified installation arrangement; the circuit breaker, electrical connections, operating accessories and any additional assembly components must be selected separately according to the complete switchboard requirements.
The RHD designation identifies the particular configuration specified for the PHCX1105. Compatibility with the intended operating arrangement and any associated accessories should be checked against the applicable ABB System pro E power installation documentation before assembly.
Using a dedicated ABB installation kit supports consistent positioning of compatible protective devices within a modular switchboard. Correct installation must follow the manufacturer's instructions, including requirements for electrical clearances, connections, access and the overall switchboard assembly.
Typical Applications
- ABB System pro E power low-voltage switchboard assemblies.
- Industrial electrical distribution panels.
- Commercial building main and sub-distribution switchboards.
- Horizontal installation of ABB Tmax XT1 circuit breakers.
- Fixed moulded case circuit breaker arrangements.
- Electrical switchgear and controlgear assemblies.
- Three-phase power distribution systems using compatible 3-pole or 4-pole protective devices.
- Modular switchboard sections with a nominal width of 600 mm.
- Electrical panel-building and infrastructure projects requiring system-compatible circuit breaker mounting accessories.
Technical Specifications
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ008476A0000 |
| Product group | System Pro E Power |
| Product type | Fixed circuit breaker installation kit |
| Compatible circuit breaker series | ABB Tmax XT1 |
| Supported pole configurations | 3-pole / 4-pole |
| Installation configuration | Fixed |
| Configuration designation | RHD |
| Mounting orientation | Horizontal |
| Compatible switchboard section width | 600 mm |
| System compatibility | ABB System pro E power |
| Equipment family | Low-voltage moulded case circuit breakers |
| Application | Low-voltage electrical distribution switchboards |
Frequently Asked Questions
What is the ABB PHCX1105 used for?
The ABB PHCX1105 is a horizontal fixed installation kit designed for mounting compatible ABB Tmax XT1 moulded case circuit breakers within System pro E power low-voltage electrical switchboards.
Which circuit breakers are compatible with the PHCX1105?
The PHCX1105 is specified for ABB Tmax XT1 circuit breakers in 3-pole or 4-pole fixed configurations. The selected breaker and associated accessories must match the kit's specified installation arrangement.
What does the RHD designation mean for the ABB PHCX1105?
RHD is the configuration designation specified for the PHCX1105 installation kit. The corresponding operating arrangement and accessory compatibility should be confirmed using the applicable ABB installation documentation.
What switchboard width is required for the PHCX1105?
The installation kit is designed for compatible ABB System pro E power switchboard sections with a nominal width of 600 mm.
Is the ABB PHCX1105 intended for fixed or withdrawable circuit breakers?
The PHCX1105 is specifically designed for fixed ABB Tmax XT1 circuit breaker installation with a horizontal mounting orientation. It is not specified as a plug-in or withdrawable installation kit.
Trusted ABB Switchboard Installation Solutions
ABB System pro E power installation accessories support the professional construction of modular low-voltage electrical switchboards. The ABB PHCX1105 provides a dedicated horizontal fixed mounting solution for compatible 3-pole and 4-pole Tmax XT1 circuit breakers, with an RHD configuration designation and compatibility with 600 mm wide switchboard sections, helping electrical panel builders develop organised and dependable power distribution assemblies.
