Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHCX1101 (1STQ008474A0000) is a System Pro E Power installation kit for a compatible 3-pole or 4-pole Tmax XT1 fixed circuit breaker, designed for horizontal mounting in a 600 mm-wide low-voltage switchgear compartment.
£112.66
The ABB PHCX1101 (1STQ008474A0000) is a dedicated installation kit for an ABB Tmax XT1 fixed moulded-case circuit breaker, designed for integration into ABB System Pro E Power low-voltage electrical distribution assemblies. Specified for 3-pole and 4-pole circuit breaker configurations, the kit supports horizontal installation within a 600 mm-wide switchgear compartment.
As part of the ABB System Pro E Power product range, the PHCX1101 provides a purpose-designed mounting solution for compatible ABB Tmax XT1 moulded-case circuit breakers (MCCBs). Its fixed installation configuration is intended for circuit breakers secured in their designated mounting position, while the horizontal arrangement supports organised protective device integration within modular switchgear structures.
Combining ABB Tmax XT1 compatibility, 3-pole or 4-pole installation, fixed mounting and a 600 mm nominal compartment width, the ABB PHCX1101 is a practical accessory for professional panel builders and switchboard manufacturers. It supports the construction of compatible System Pro E Power electrical distribution assemblies where accurate circuit breaker positioning and component compatibility are essential.
The ABB PHCX1101 provides a dedicated installation arrangement for a compatible ABB Tmax XT1 fixed moulded-case circuit breaker. Tmax XT1 circuit breakers are used in low-voltage electrical distribution systems to provide circuit protection according to the selected breaker model, trip unit and installation requirements. The PHCX1101 supports the specified 3-pole or 4-pole configuration, allowing panel builders to select a compatible protective device for the intended electrical distribution arrangement.
A fixed circuit breaker installation uses a breaker secured in its designated mounting position rather than a plug-in or withdrawable configuration. The PHCX1101 is specified for horizontal mounting in a 600 mm nominal-width compartment, supporting the positioning of the selected XT1 circuit breaker within a compatible ABB System Pro E Power enclosure. This arrangement is relevant to switchboard designs where component layout, installation clearances and access for electrical connections must be considered during assembly.
The ABB System Pro E Power platform supports modular low-voltage switchboard construction, including assemblies designed in accordance with IEC 61439-2. When selecting the PHCX1101, panel builders should verify the exact XT1 breaker version, pole configuration, mounting arrangement and required electrical connections against the applicable ABB documentation. The PHCX1101 is an installation accessory; the supplied specification does not establish that the circuit breaker, connection accessories or other switchgear components are included.
| Product group | System Pro E Power |
|---|---|
| Product designation | PHCX1101 |
| ABB order code | 1STQ008474A0000 |
| Part number | 1STQ008474A0000 |
| Product type | Fixed circuit breaker installation kit |
| Compatible circuit breaker series | ABB Tmax XT1 |
| Circuit breaker configuration | Single XT1 installation |
| Pole configuration | 3-pole / 4-pole |
| Circuit breaker installation type | Fixed |
| Mounting orientation | Horizontal |
| Nominal compartment width | 600 mm |
| Compatible enclosure system | ABB System Pro E Power |
| Application | Low-voltage switchgear and electrical distribution assemblies |
The ABB PHCX1101 is an installation kit for a compatible ABB Tmax XT1 fixed moulded-case circuit breaker. It supports 3-pole or 4-pole configurations and is designed for horizontal mounting within a 600 mm-wide ABB System Pro E Power switchgear compartment.
The PHCX1101 is specified for the ABB Tmax XT1 circuit breaker series in 3-pole or 4-pole fixed configurations. The exact breaker version and associated installation components must be checked against the applicable ABB documentation before assembly.
Fixed mounting means that the compatible Tmax XT1 circuit breaker is installed in a secured position within the switchgear assembly rather than using a plug-in or withdrawable arrangement. The PHCX1101 provides the specified installation configuration for this type of breaker.
The supplied specification identifies the PHCX1101 as a circuit breaker installation kit and does not confirm that a Tmax XT1 circuit breaker or associated electrical connection accessories are included. These components should be specified separately and verified against the required switchgear configuration.
The PHCX1101 is specified for horizontal installation within a compatible ABB System Pro E Power switchgear compartment with a 600 mm nominal width. The complete mounting arrangement should be checked against the relevant ABB installation instructions.
ABB System Pro E Power supports modular low-voltage switchgear construction for professional electrical distribution applications. The ABB PHCX1101 (1STQ008474A0000) provides a dedicated horizontal installation solution for compatible ABB Tmax XT1 3-pole or 4-pole fixed circuit breakers within 600 mm-wide switchgear compartments, supporting accurate component selection and organised panel assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.