Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHBX1101 1STQ008473A0000 is a System pro E power horizontal installation kit for compatible Tmax XT1 three-pole or four-pole fixed moulded case circuit breakers in a 400 mm wide enclosure section.
£107.82
The ABB PHBX1101 (1STQ008473A0000) is a dedicated Tmax XT1 fixed horizontal circuit breaker installation kit designed for compatible ABB System pro E power low-voltage switchgear enclosures. This installation accessory supports the integration of ABB Tmax XT1 moulded case circuit breakers (MCCBs) in three-pole or four-pole configurations, providing a coordinated mounting arrangement for electrical distribution assemblies.
Part of the ABB System pro E power range, the PHBX1101 helps electrical panel builders integrate circuit protection equipment into modular switchboards. Its fixed mounting configuration is intended for applications where the circuit breaker remains installed in its designated position, while the horizontal orientation supports an organised equipment layout within the enclosure.
Designed for a 400 mm nominal installation width, the ABB PHBX1101 is suitable for compatible System pro E power cabinet sections requiring a horizontally installed Tmax XT1 circuit breaker. Its dedicated configuration helps simplify component selection and supports consistent installation practices in industrial and commercial low-voltage power distribution systems.
Moulded case circuit breakers are essential protective components in many low-voltage electrical distribution systems. Depending on their selected ratings and protection units, they can provide overload and short-circuit protection for electrical circuits and connected equipment. Correct mechanical installation is an important part of incorporating these devices into a complete switchgear assembly.
The ABB PHBX1101 is designed specifically for the ABB Tmax XT1 circuit breaker series, supporting fixed installation in a horizontal arrangement. Its compatibility with three-pole and four-pole configurations allows panel builders to accommodate suitable XT1 circuit breaker variants according to the electrical distribution design.
A fixed circuit breaker installation means that the breaker is mounted in a designated position within the switchboard rather than installed using a plug-in or withdrawable arrangement. This configuration is suitable for applications where the circuit breaker is intended to remain mechanically installed during normal operation and where removal or replacement follows the appropriate isolation and maintenance procedures.
The 400 mm nominal installation width identifies the compatible System pro E power enclosure section for which the kit is specified. The horizontal arrangement should be coordinated with the selected circuit breaker, electrical connections, required clearances and surrounding enclosure components.
The ABB Tmax XT1 belongs to the Tmax XT moulded case circuit breaker family, which is used in industrial and commercial electrical distribution applications. Different XT1 versions can offer different current ratings, breaking capacities, trip technologies and accessory arrangements. These electrical characteristics are determined by the selected circuit breaker and are not ratings of the PHBX1101 installation kit itself.
The PHBX1101 is an installation accessory, not a complete circuit breaker assembly. The compatible Tmax XT1 circuit breaker, electrical connections and any required operating or auxiliary accessories must be selected according to the installation requirements. Exact kit contents, fixing arrangements and compatibility with individual XT1 variants should be confirmed against the relevant ABB documentation.
ABB System pro E power provides a modular enclosure platform for constructing low-voltage distribution switchboards. Its coordinated range of installation kits, structural components and accessories supports organised equipment layouts and consistent cabinet assembly for professional electrical panel-building projects.
| Brand | ABB |
|---|---|
| Product range | System pro E power |
| Product designation | PHBX1101 |
| Manufacturer part number | 1STQ008473A0000 |
| Manufacturer description | XT1 KIT 3-4P FIXED HORIZ. W=400MM |
| Product category | Circuit breaker installation accessories |
| Component type | MCCB installation kit |
| Compatible circuit breaker family | ABB Tmax XT1 |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting execution | Fixed |
| Installation orientation | Horizontal |
| Nominal installation width | 400 mm |
| Compatible enclosure platform | ABB System pro E power |
| Primary function | Installation of a compatible fixed Tmax XT1 circuit breaker |
| Intended application | Low-voltage electrical distribution and switchgear assemblies |
The ABB PHBX1101 is an installation kit designed for mounting a compatible ABB Tmax XT1 fixed circuit breaker horizontally within an ABB System pro E power low-voltage switchgear enclosure.
The PHBX1101 is specified for ABB Tmax XT1 moulded case circuit breakers in three-pole or four-pole fixed configurations. Compatibility with the exact breaker version and any associated accessories should be confirmed using ABB installation documentation.
Fixed installation means the circuit breaker is mounted in a designated position rather than using a plug-in or withdrawable arrangement. Horizontal installation identifies the mounting orientation specified for the PHBX1101 within a compatible switchgear enclosure.
The ABB PHBX1101 is designed for a 400 mm nominal installation width within compatible ABB System pro E power enclosure sections. The complete cabinet dimensions, installation clearances and associated components must be checked separately.
The PHBX1101 is identified as a circuit breaker installation kit, not a complete MCCB assembly. The Tmax XT1 circuit breaker and any required electrical, operating or auxiliary accessories should be specified separately unless their inclusion is explicitly confirmed in the supplier's package contents.
ABB System pro E power installation accessories provide coordinated solutions for integrating compatible Tmax XT circuit breakers into modular low-voltage switchgear, supporting organised equipment layouts, consistent fixed mounting arrangements and professional electrical distribution cabinet construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.