Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008471B0000 ABB System Pro E Power IP65 Open Top/Bottom Panel 750 × 900 mm 2 mm
ABB 1STQ008471B0000 System Pro E Power 2 mm thick IP65-designated open top/bottom enclosure panel for compatible 750 mm wide and 900 mm deep low-voltage switchboard sections, requiring suitable cable-entry components and correct sealing to achieve the intended ingress protection.
£230.13
Why Choose the ABB 1STQ008471B0000 System Pro E Power IP65 Open Top/Bottom Panel?
The ABB 1STQ008471B0000 is a 2 mm thick IP65-designated open top/bottom enclosure panel designed for the ABB System Pro E Power low-voltage switchboard range. Specified for compatible switchboard structures with a nominal width of 750 mm and depth of 900 mm, this accessory provides a coordinated enclosure component for professional electrical distribution assemblies.
Its open top/bottom configuration is intended for switchboard installations requiring a planned cable-entry opening or compatible enclosure interface. Unlike a blind panel, which provides a solid covering without an intentional opening, this design allows suitable cable-entry components to be incorporated into the upper or lower enclosure structure.
The ABB 1STQ008471B0000 combines a nominal 2 mm panel thickness with an IP65 protection designation for use in appropriately engineered System Pro E Power assemblies. Achieving IP65 ingress protection depends on the complete enclosure arrangement, including correctly selected cable-entry flanges, suitable seals and proper installation. The open panel alone does not provide a complete IP65-rated barrier.
Key Advantages
- Genuine ABB System Pro E Power switchboard enclosure accessory.
- Designed for nominal 750 mm wide × 900 mm deep switchboard sections.
- 2 mm nominal panel thickness for a substantial enclosure covering.
- Open top/bottom configuration supports planned cable-entry arrangements.
- IP65-designated for integration into appropriately sealed switchboard assemblies.
- Supports compatible fixed cable-entry flange and sealing solutions.
- Suitable for top or bottom installation in compatible enclosure structures.
- Helps maintain coordinated modular construction within the ABB System Pro E Power range.
- Suitable for professional switchboard manufacturing, maintenance and refurbishment.
Key Features
- ABB System Pro E Power modular switchboard enclosure accessory.
- ABB order code: 1STQ008471B0000.
- Product designation: 2MM IP65 OPEN TOP/BOT. W750 D900.
- Open top/bottom enclosure panel configuration.
- 750 mm nominal enclosure width.
- 900 mm nominal enclosure depth.
- 2 mm nominal panel thickness.
- IP65 protection designation for compatible completed assemblies.
- Open design accommodates an appropriately selected cable-entry or enclosure interface solution.
- Intended for integration with compatible ABB System Pro E Power structural and enclosure components.
- Suitable for industrial and commercial low-voltage electrical distribution applications.
Open Top/Bottom Panel Design for Controlled Cable Entry
The ABB System Pro E Power platform uses coordinated enclosure components to support modular low-voltage switchboard construction. Open top/bottom panels are selected where the enclosure requires a planned opening rather than a completely solid covering. The ABB 1STQ008471B0000 is intended for compatible nominal 750 mm wide and 900 mm deep switchboard sections, allowing an appropriate cable-entry or interface arrangement to be incorporated into the enclosure design.
The IP65 designation refers to the intended protection level of a correctly assembled enclosure. Under the relevant ingress protection classification, IP65 signifies dust-tight protection and resistance to water jets. Because this panel includes an intentional opening, suitable cable-entry flanges, seals and other required enclosure components must be correctly fitted to achieve the specified protection. The nominal 750 mm width and 900 mm depth describe the compatible switchboard configuration rather than independently confirmed external measurements of the individual panel.
Installation and Compatibility Considerations
Before installation, the switchboard builder should confirm that the ABB 1STQ008471B0000 matches the intended System Pro E Power enclosure arrangement. The nominal width, depth and top or bottom mounting position must correspond to the switchboard structure. Cable-entry accessories should also be selected with consideration for cable routing, installation clearances and the required enclosure protection level.
Where an IP65-rated completed assembly is required, the installer must ensure that the opening is appropriately sealed using compatible components and that all enclosure joints and interfaces meet the applicable assembly requirements. The product designation does not establish the exact flange, gasket or fixing accessories supplied with the panel; these details should be verified against the relevant ABB product and installation documentation.
Typical Applications
- ABB System Pro E Power low-voltage switchboard construction.
- Electrical distribution assemblies with nominal 750 × 900 mm enclosure sections.
- Industrial electrical distribution cabinets.
- Commercial building main and sub-distribution switchboards.
- Switchboard installations requiring planned top or bottom cable entry.
- Compatible IP65-designated enclosures with appropriately sealed openings.
- OEM electrical panel building and modular switchboard manufacturing.
- Maintenance, refurbishment and replacement of compatible enclosure panels.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ008471B0000 |
| Product designation | 2MM IP65 OPEN TOP/BOT. W750 D900 |
| Product type | Open top/bottom enclosure panel |
| Product category | Low-voltage switchboard enclosure accessories |
| Nominal enclosure width | 750 mm |
| Nominal enclosure depth | 900 mm |
| Nominal panel thickness | 2 mm |
| Protection designation | IP65 |
| Panel configuration | Open |
| Intended mounting position | Top or bottom |
| Ingress protection requirement | Compatible cable-entry components and correct sealing of the complete enclosure assembly |
| Application | Low-voltage electrical distribution switchboards |
| System compatibility | ABB System Pro E Power |
Frequently Asked Questions
What is the ABB 1STQ008471B0000 used for?
The ABB 1STQ008471B0000 is an open top/bottom enclosure panel for compatible ABB System Pro E Power low-voltage switchboards. It provides an opening for a suitable cable-entry or enclosure interface arrangement.
What dimensions are specified for the ABB 1STQ008471B0000?
The panel is specified for a nominal 750 mm wide and 900 mm deep switchboard section, with a nominal thickness of 2 mm. The width and depth refer to the compatible enclosure configuration rather than confirmed overall physical dimensions of the individual panel.
What is the difference between an open and a blind top/bottom panel?
An open top/bottom panel provides an intentional opening for a compatible cable-entry or enclosure interface arrangement. A blind panel provides a solid covering without an intentional opening. The correct choice depends on the switchboard layout and cable-routing requirements.
Does the ABB 1STQ008471B0000 provide IP65 protection on its own?
No. Although the panel is designated for IP65 enclosure configurations, the completed switchboard requires compatible cable-entry flanges, suitable seals and correct installation to achieve the intended protection. An exposed opening does not provide IP65 ingress protection.
Can the ABB 1STQ008471B0000 be installed at the top or bottom of a switchboard?
Yes. Its open top/bottom designation identifies it for either position in a compatible ABB System Pro E Power enclosure arrangement, subject to the applicable assembly instructions and sealing requirements.
Trusted ABB Switchboard Technology
ABB System Pro E Power enclosure accessories support coordinated low-voltage switchboard construction for professional electrical panel builders. The ABB 1STQ008471B0000 provides a dedicated 2 mm open top/bottom panel for nominal 750 mm wide and 900 mm deep switchboard sections, supporting engineered cable-entry arrangements and correctly maintained enclosure ingress protection.
