Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVBX1404 1STQ008465A0000 is a System pro E power vertical installation kit for compatible Tmax XT1 three-pole or four-pole fixed circuit breakers with a motorised operating arrangement in a 400 mm wide enclosure section.
£120.58
The ABB PVBX1404 (1STQ008465A0000) is a dedicated Tmax XT1 fixed motorised circuit breaker installation kit designed for vertical installation within compatible ABB System pro E power low-voltage switchgear enclosures. This accessory supports the integration of an ABB Tmax XT1 moulded case circuit breaker in a three-pole or four-pole configuration, with provision for a compatible motor operating mechanism.
Part of the ABB System pro E power range, the PVBX1404 provides a coordinated installation solution for electrical panel builders incorporating motor-operated circuit breakers into modular power distribution cabinets. Its fixed mounting arrangement supports secure mechanical integration, while the vertical installation format helps organise protective devices and associated operating equipment within the enclosure.
Designed for a 400 mm nominal installation width, the ABB PVBX1404 accommodates 3P or 4P Tmax XT1 circuit breaker configurations with fixed mounting and a motorised operating arrangement. It is intended for professional low-voltage switchgear construction where correct circuit breaker positioning, operating mechanism compatibility and reliable integration with the complete electrical distribution assembly are essential.
Moulded case circuit breakers are important protective devices in low-voltage electrical distribution systems. Depending on their selected ratings and trip units, they provide protection against overloads, short circuits and other specified electrical faults. Their installation within a switchgear enclosure must provide suitable mechanical support, electrical connections, operating access and compatibility with the complete distribution assembly.
The ABB PVBX1404 is specifically configured for an ABB Tmax XT1 circuit breaker in a fixed, motorised, vertical installation arrangement. Its compatibility with three-pole and four-pole versions provides flexibility for electrical panel builders constructing suitable power distribution systems within a 400 mm wide System pro E power enclosure section.
A fixed circuit breaker remains mechanically installed in its designated mounting position during normal service. Unlike withdrawable or plug-in arrangements, fixed installations are not designed around routine breaker withdrawal. This makes the PVBX1404 suitable for switchboard configurations where fixed mounting is required alongside a compatible electrically operated mechanism.
Motor operating mechanisms enable appropriately equipped circuit breakers to perform specified switching operations through electrical control signals. Depending on the selected XT1 accessories and control arrangement, motorised operation may be incorporated into remote switching, electrical control or automation systems. The available functions depend on the actual motor operator, circuit breaker version and associated control equipment.
The ABB Tmax XT1 belongs to the Tmax XT moulded case circuit breaker family used in industrial and commercial low-voltage distribution. Suitable XT1 versions can be selected with different protection arrangements and accessories according to the electrical installation requirements. The PVBX1404 supports the specified installation format but does not itself determine the circuit breaker's rated current, breaking capacity or protection characteristics.
The PVBX1404 is an installation kit rather than a complete motorised circuit breaker assembly. The XT1 circuit breaker, compatible motor operator, electrical connections and any additional control or auxiliary accessories must be selected according to the intended application. The kit's 400 mm nominal width refers to the specified enclosure installation width and does not represent the complete cabinet dimensions.
ABB System pro E power provides a modular enclosure platform for low-voltage electrical distribution switchboards. Its coordinated range of structural components, installation kits and accessories helps electrical panel builders develop consistent equipment layouts while accommodating different circuit breaker configurations and operating requirements.
| Brand | ABB |
|---|---|
| Product range | System pro E power |
| Product designation | PVBX1404 |
| Manufacturer part number | 1STQ008465A0000 |
| Manufacturer description | XT1 KIT 3-4P FIXED MOT.VERT.W=400MM |
| Product type | Circuit breaker installation kit |
| Accessory category | MCCB mounting and installation accessories |
| Compatible circuit breaker family | ABB Tmax XT1 |
| Compatible pole configurations | 3P / 4P |
| Circuit breaker mounting execution | Fixed |
| Operating mechanism arrangement | Motorised |
| Installation orientation | Vertical |
| Nominal installation width | 400 mm |
| Compatible enclosure platform | ABB System pro E power |
| Primary function | Installation of a compatible fixed Tmax XT1 circuit breaker with motor operating arrangement |
| Intended application | Low-voltage electrical distribution and switchgear assemblies |
The ABB PVBX1404 is an installation kit designed for a compatible ABB Tmax XT1 fixed motorised circuit breaker in a vertical arrangement within an ABB System pro E power low-voltage switchgear enclosure.
The kit is specified for ABB Tmax XT1 moulded case circuit breakers in three-pole or four-pole fixed configurations, with a compatible motor operating arrangement. The exact circuit breaker and motor operator combination must be checked against the relevant ABB installation documentation.
Fixed installation means the circuit breaker is mounted in a designated position rather than installed as a withdrawable assembly. Motorised operation means a compatible motor operating mechanism can perform supported switching operations through an electrical control arrangement.
The ABB PVBX1404 is specified for a 400 mm nominal installation width and vertical mounting orientation within compatible ABB System pro E power enclosure configurations. The complete cabinet dimensions and installation clearances must be checked separately.
The PVBX1404 is identified as a circuit breaker installation kit, not a complete motorised circuit breaker assembly. The XT1 circuit breaker, motor operator and other required electrical or mechanical accessories should be specified separately unless their inclusion is explicitly confirmed in the supplier's package contents.
ABB System pro E power installation accessories support professional low-voltage switchgear construction by providing coordinated arrangements for compatible Tmax XT circuit breakers, helping panel builders create organised electrical distribution cabinets with suitable fixed mounting and motor-operated switching configurations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.