1STQ008463B0000 ABB System Pro E Power IP65 Open Top/Bottom Panel 600 × 300 mm 2 mm

Why Choose the ABB 1STQ008463B0000 System Pro E Power IP65 Open Top/Bottom Panel?

The ABB 1STQ008463B0000 is a 2 mm thick IP65-designated open top/bottom enclosure panel for the ABB System Pro E Power low-voltage switchboard range. Designed for compatible switchboard structures with a nominal width of 600 mm and depth of 300 mm, this enclosure accessory supports the construction of modular electrical distribution assemblies.

Its open top/bottom configuration provides an intentional opening for an appropriately designed cable-entry or enclosure interface arrangement. This makes the panel suitable for switchboard installations where cables or compatible accessories must pass through the upper or lower enclosure covering. Unlike a blind panel, the open version requires additional components to close or seal the designated opening.

The ABB 1STQ008463B0000 combines a nominal 2 mm panel thickness with an IP65 protection designation for use in compatible System Pro E Power assemblies. Achieving IP65 ingress protection depends on the complete enclosure design, including correctly selected cable-entry flanges, seals and installation accessories. The open panel alone does not provide a complete IP65 barrier.

Key Advantages

• Genuine ABB System Pro E Power switchboard enclosure accessory.
• Designed for nominal 600 mm wide × 300 mm deep enclosure sections.
• 2 mm nominal panel thickness for a substantial enclosure component.
• Open top/bottom design supports planned cable-entry arrangements.
• IP65-designated for integration into appropriately sealed switchboard assemblies.
• Compatible with suitable cable-entry flange and sealing arrangements, subject to ABB system requirements.
• Supports installation at the top or bottom of compatible enclosure structures.
• Helps maintain coordinated modular construction within the ABB System Pro E Power range.
• Suitable for professional electrical panel building, maintenance and refurbishment.

Key Features

• ABB System Pro E Power modular switchboard accessory.
• ABB order code: 1STQ008463B0000.
• Product designation: 2MM IP65 OPEN TOP/BOT. W600 D300.
• Open top/bottom enclosure panel configuration.
• 600 mm nominal enclosure width.
• 300 mm nominal enclosure depth.
• 2 mm nominal panel thickness.
• IP65 protection designation for compatible completed assemblies.
• Provides an opening for a suitable cable-entry or enclosure interface solution.
• Intended for use with compatible System Pro E Power structural and enclosure components.
• Suitable for industrial and commercial low-voltage electrical distribution applications.

Open Top/Bottom Panel Design for Controlled Cable Entry

The ABB System Pro E Power platform uses coordinated enclosure components to support modular low-voltage switchboard construction. An open top/bottom panel is selected where the enclosure requires a planned opening rather than a completely solid covering. The ABB 1STQ008463B0000 is intended for nominal 600 mm wide and 300 mm deep switchboard sections, allowing a compatible cable-entry or interface solution to be incorporated into the enclosure design.

The IP65 designation refers to the intended protection level of a correctly assembled enclosure. Under the relevant ingress protection classification, IP65 signifies dust-tight protection and resistance to water jets. Because this panel includes an intentional opening, suitable flanges, seals and other required enclosure components must be correctly fitted to achieve the specified protection. The nominal 600 mm width and 300 mm depth describe the compatible switchboard configuration, rather than independently confirmed external measurements of the individual panel.

Installation and Compatibility Considerations

Before installation, the switchboard builder should confirm that the ABB 1STQ008463B0000 matches the intended System Pro E Power enclosure arrangement. The nominal width, depth and top or bottom mounting position should be checked against the switchboard structure, while the cable-entry solution must accommodate the required cable routing and installation clearances.

Any compatible cable-entry flange, gasket or other sealing accessory must be selected according to the applicable ABB technical documentation. Correct assembly is particularly important where the completed switchboard is required to maintain IP65 ingress protection. The product designation does not, by itself, establish which additional accessories are supplied or included with the panel.

Typical Applications

• ABB System Pro E Power low-voltage switchboard construction.
• Electrical distribution assemblies with nominal 600 × 300 mm enclosure sections.
• Industrial electrical distribution cabinets.
• Commercial building main and sub-distribution boards.
• Switchboard installations requiring planned top or bottom cable entry.
• Compatible IP65-designated enclosures with appropriately sealed openings.
• OEM electrical panel building and modular switchboard manufacturing.
• Maintenance, refurbishment and replacement of compatible enclosure panels.