Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008462B0000 ABB System pro E Power IP65 Open Top/Bottom Panel 600 x 200 mm
ABB 1STQ008462B0000 System pro E Power IP65 open top/bottom enclosure panel with a 2 mm thickness designation, designed for compatible 600 mm wide and 200 mm deep low-voltage electrical distribution cabinets.
£136.66
Why Choose the ABB 1STQ008462B0000 System pro E Power IP65 Open Top/Bottom Panel?
The ABB 1STQ008462B0000 is a 2 mm open top/bottom enclosure panel designed for integration into the ABB System pro E Power low-voltage distribution system. Specified for IP65 enclosure applications, this component provides an open panel arrangement for compatible electrical cabinets, supporting modular switchboard construction and the integration of electrical distribution equipment.
As part of the ABB System pro E Power range, this enclosure accessory is intended for electrical panel builders, switchboard manufacturers and industrial installation engineers requiring coordinated cabinet components. Its open configuration provides a designated opening at the top or bottom of a compatible enclosure, allowing suitable cable-entry arrangements and associated accessories to be incorporated according to the installation requirements.
Designed for an enclosure configuration with a 600 mm nominal width and 200 mm nominal depth, the ABB 1STQ008462B0000 carries a 2 mm thickness designation. Its System pro E Power compatibility supports professional electrical distribution installations where modular integration, enclosure configuration and environmental protection are important design considerations.
Key Advantages
- ABB System pro E Power compatibility: Designed for integration into compatible modular low-voltage distribution enclosures.
- IP65 application designation: Intended for use in suitably assembled and sealed IP65 enclosure systems.
- 600 mm nominal width: Matches the designated enclosure width configuration.
- 200 mm nominal depth: Suitable for compatible cabinet arrangements requiring this depth.
- 2 mm thickness designation: Identifies the manufacturer's specified panel thickness.
- Open panel construction: Provides an opening for compatible cable-entry or enclosure accessory arrangements.
- Top or bottom installation: Supports flexible positioning within designated System pro E Power assemblies.
- Modular enclosure integration: Helps coordinate the selection and assembly of compatible cabinet components.
- Professional switchboard construction: Suitable for industrial and commercial electrical distribution projects.
Key Features
- Manufacturer: ABB.
- Product family: System pro E Power.
- Product type: Open top/bottom enclosure panel.
- ABB order code: 1STQ008462B0000.
- Manufacturer designation: 2MM IP65 OPEN TOP/BOT. W600 D200.
- Nominal enclosure width: 600 mm.
- Nominal enclosure depth: 200 mm.
- Thickness designation: 2 mm.
- IP protection application: IP65.
- Panel configuration: Open.
- Installation position: Top or bottom of a compatible enclosure.
- Application: Modular low-voltage electrical distribution assemblies.
Flexible Top and Bottom Enclosure Integration for Power Distribution
Low-voltage electrical distribution assemblies require correctly selected enclosure components to accommodate circuit breakers, busbars, switching devices, control equipment and associated electrical connections. Open top and bottom panels provide designated openings within compatible cabinet structures, supporting the integration of suitable cable-entry systems and enclosure accessories while allowing panel builders to plan practical equipment and cable layouts.
The ABB 1STQ008462B0000 is intended for compatible System pro E Power enclosure configurations measuring 600 mm in nominal width and 200 mm in nominal depth. Its open construction supports top or bottom enclosure arrangements in industrial and commercial distribution boards. Because the panel incorporates an opening, achieving IP65 protection requires suitable compatible cable-entry or closure components, appropriate sealing and installation in accordance with ABB assembly instructions. The open panel alone does not provide a complete IP65 seal.
Typical Applications
- Low-voltage distribution boards: Compatible ABB System pro E Power electrical assemblies.
- Industrial switchboards: Modular cabinet construction for electrical power distribution.
- Main distribution assemblies: Enclosure integration in compatible power distribution systems.
- Sub-distribution cabinets: Top or bottom panel arrangements for designated cabinet configurations.
- Cable-entry installations: Integration of suitable cable-entry accessories within compatible enclosure openings.
- Commercial electrical installations: Modular distribution cabinets for buildings and facilities.
- Electrical control panels: Compatible enclosures housing control and switching equipment.
- Switchboard manufacturing and refurbishment: Assembly or replacement of matching System pro E Power enclosure components.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008462B0000 |
| SKU / MPN | 1STQ008462B0000 |
| Product type | Open top/bottom enclosure panel |
| Manufacturer product designation | 2MM IP65 OPEN TOP/BOT. W600 D200 |
| Nominal enclosure width | 600 mm |
| Nominal enclosure depth | 200 mm |
| Manufacturer thickness designation | 2 mm |
| IP protection application | IP65 |
| Panel configuration | Open |
| Installation position | Top or bottom |
| Compatible enclosure system | ABB System pro E Power |
| Product category | Electrical enclosure accessories |
| Application | Low-voltage electrical power distribution |
| Product group | System pro E Power |
Frequently Asked Questions
What is the ABB 1STQ008462B0000 used for?
The ABB 1STQ008462B0000 is an open top/bottom enclosure panel designed for compatible ABB System pro E Power electrical distribution cabinets. It provides an opening for suitable cable-entry or enclosure accessory arrangements within low-voltage switchboard assemblies.
What enclosure dimensions is the ABB 1STQ008462B0000 designed for?
The panel is specified for a compatible enclosure configuration with a nominal 600 mm width and 200 mm depth. The manufacturer designation also identifies a 2 mm thickness.
Is the ABB 1STQ008462B0000 suitable for IP65 enclosures?
Yes. The component is designated for IP65 enclosure applications. However, because it has an open configuration, the completed enclosure requires suitable closure or cable-entry accessories and correct sealing to achieve the intended IP65 protection rating.
Can the ABB 1STQ008462B0000 be installed at the top or bottom of an enclosure?
Yes. The manufacturer identifies the component as an open top/bottom panel for compatible ABB System pro E Power enclosure configurations. Installation position, fixing arrangements and required accessories should be confirmed against the relevant ABB assembly instructions.
What is the difference between an open and a blind top/bottom panel?
An open top/bottom panel provides an opening for suitable cable-entry or enclosure accessory arrangements, while a blind top/bottom panel provides a solid closure without an intentional opening. The appropriate option depends on the enclosure configuration, cable-entry requirements and intended protection rating.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure components provide coordinated solutions for professional low-voltage switchboard construction. The ABB 1STQ008462B0000 open top/bottom panel supports the assembly of compatible 600 mm wide and 200 mm deep electrical distribution cabinets, helping panel builders incorporate suitable cable-entry and enclosure accessories into organised, maintainable power distribution installations.
