Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008453B0000 ABB System pro E Power IP65 Open Top/Bottom Panel 400 x 200 mm
ABB 1STQ008453B0000 System pro E Power IP65 open top/bottom enclosure panel with a 2 mm thickness designation, designed for compatible 400 mm wide and 200 mm deep low-voltage electrical distribution cabinets.
£88.20
Why Choose the ABB 1STQ008453B0000 System pro E Power IP65 Open Top/Bottom Panel?
The ABB 1STQ008453B0000 is a 2 mm open top/bottom enclosure panel designed for integration into the ABB System pro E Power low-voltage distribution system. Specified for IP65 enclosure applications, this component provides an open panel arrangement for compatible electrical cabinets, supporting the construction of modular power distribution and switchgear assemblies.
As part of the ABB System pro E Power range, this open top/bottom panel is intended for electrical panel builders, switchboard manufacturers and industrial installation engineers requiring compatible enclosure components. Its open configuration provides a designated opening within the top or bottom section of an electrical cabinet, allowing suitable cable-entry systems or other compatible enclosure accessories to be incorporated according to the installation requirements.
Designed for an enclosure configuration with a 400 mm nominal width and 200 mm nominal depth, the ABB 1STQ008453B0000 carries a 2 mm thickness designation. Its System pro E Power compatibility supports professional electrical distribution installations where enclosure configuration, modular integration and environmental protection are important design considerations.
Key Advantages
- Designed for the ABB System pro E Power modular distribution system.
- Specified for IP65 enclosure applications when correctly integrated into a compatible rated assembly.
- 400 mm nominal enclosure width for the designated cabinet configuration.
- 200 mm nominal enclosure depth for compatible distribution cabinets.
- 2 mm manufacturer thickness designation.
- Open panel configuration supports suitable cable-entry and enclosure accessory arrangements.
- Suitable for top or bottom installation within compatible enclosure configurations.
- Supports flexible cabinet assembly and installation planning.
- System-compatible design helps simplify enclosure component selection and integration.
Key Features
- ABB System pro E Power enclosure accessory.
- Open top/bottom panel for compatible low-voltage distribution cabinets.
- IP65 application designation.
- 400 mm nominal enclosure width.
- 200 mm nominal enclosure depth.
- 2 mm manufacturer thickness designation.
- Open construction for suitable enclosure entry and accessory arrangements.
- Designed for integration into modular electrical distribution assemblies.
- Supports professional switchboard and electrical panel-building applications.
- Manufacturer order code 1STQ008453B0000.
Flexible Enclosure Integration for Electrical Distribution Systems
Low-voltage electrical distribution assemblies require correctly selected enclosure components to accommodate internal switchgear, circuit breakers, busbars and associated electrical equipment. Open top and bottom panels provide designated openings within compatible cabinet structures, supporting the integration of suitable cable-entry systems and other enclosure accessories while maintaining an organised switchboard arrangement.
The ABB 1STQ008453B0000 is designed for compatible System pro E Power enclosure configurations with a nominal width of 400 mm and depth of 200 mm. Its open construction supports flexible top or bottom enclosure arrangements in industrial and commercial distribution boards. Because the panel incorporates an opening, achieving IP65 protection requires suitable compatible cable-entry or closure components, correct sealing and installation in accordance with ABB assembly instructions. The open panel alone does not provide a complete IP65 seal.
Typical Applications
- ABB System pro E Power low-voltage distribution boards.
- Industrial electrical switchboards and power distribution cabinets.
- Main and sub-distribution electrical assemblies.
- Commercial and industrial electrical distribution installations.
- Top and bottom enclosure arrangements requiring suitable cable-entry provisions.
- Electrical switchgear and control panel construction.
- Modular cabinet configurations with a nominal width of 400 mm and depth of 200 mm.
- Enclosure assemblies designed for IP65 protection with appropriate accessories.
- Switchboard manufacturing, refurbishment and compatible enclosure component replacement.
Technical Specifications
| Series | System pro E Power |
|---|---|
| Model / order code | 1STQ008453B0000 |
| Product type | Open top/bottom enclosure panel |
| Product designation | 2MM IP65 OPEN TOP/BOT. W400 D200 |
| Nominal enclosure width | 400 mm |
| Nominal enclosure depth | 200 mm |
| Manufacturer thickness designation | 2 mm |
| IP protection application | IP65 |
| Panel configuration | Open |
| Installation position | Top or bottom of compatible enclosure |
| Mounting application | Enclosure top/bottom arrangement within System pro E Power assemblies |
| Product category | Electrical enclosure accessories |
| Application | Low-voltage electrical power distribution |
| Product group | System pro E Power |
Frequently Asked Questions
What is the ABB 1STQ008453B0000 used for?
The ABB 1STQ008453B0000 is an open top/bottom enclosure panel designed for compatible ABB System pro E Power electrical distribution cabinets. It provides an open enclosure section for suitable cable-entry or accessory arrangements within low-voltage switchboard assemblies.
What enclosure dimensions is the ABB 1STQ008453B0000 designed for?
The panel is specified for a compatible enclosure configuration with a nominal 400 mm width and 200 mm depth. Its manufacturer designation also identifies a 2 mm thickness.
Is the ABB 1STQ008453B0000 suitable for IP65 enclosures?
Yes. The component is designated for IP65 enclosure applications. However, because it has an open configuration, the completed enclosure requires suitable closure or cable-entry accessories and correct sealing to achieve the intended IP65 protection rating.
Can the ABB 1STQ008453B0000 be installed at the top or bottom of an enclosure?
Yes. The manufacturer identifies this component as an open top/bottom panel for compatible ABB System pro E Power enclosure configurations. The installation position, fixing arrangements and required accessories should follow the relevant ABB assembly instructions.
What is the difference between an open and a blind top/bottom panel?
An open top/bottom panel provides an opening for suitable cable-entry or enclosure accessory arrangements, while a blind top/bottom panel provides a solid closure without an intentional opening. The correct choice depends on the cabinet configuration, installation requirements and intended enclosure protection rating.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure components provide coordinated solutions for professional low-voltage switchboard construction. The ABB 1STQ008453B0000 open top/bottom panel supports flexible assembly of compatible electrical distribution cabinets, helping panel builders integrate suitable cable-entry and enclosure accessories into organised, protected and dependable power distribution installations.
