Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008446B0000 ABB IP65 Open Top/Bottom Enclosure Component 2mm W250 D700 – System pro E power
ABB 1STQ008446B0000 System pro E power IP65-designated open top/bottom electrical enclosure component with a specified 2 mm thickness for compatible 250 mm wide and 700 mm deep low-voltage distribution switchboard configurations.
£66.82
Why Choose the ABB 1STQ008446B0000 IP65 Open Top/Bottom Enclosure Component?
The ABB 1STQ008446B0000 is a dedicated IP65-designated open top/bottom enclosure component from the ABB System pro E power range, intended for compatible low-voltage electrical distribution switchboards. Identified by the manufacturer's designation 2MM IP65 OPEN TOP/BOT. W250 D700, this accessory features a 2 mm specified thickness and is designed for a 250 mm wide and 700 mm deep enclosure configuration.
The open top/bottom arrangement provides a manufacturer-specific enclosure component for switchboard assemblies requiring a suitable upper or lower enclosure configuration. It is intended for integration with compatible ABB System pro E power structures, supporting the planned construction of modular electrical distribution panels.
With its IP65 designation and specified 250 mm width and 700 mm depth, the ABB 1STQ008446B0000 is relevant to industrial and commercial switchboard projects where enclosure dimensions, component compatibility and environmental protection are important design considerations. The completed assembly's protection level depends on correct integration with the associated enclosure components and any required sealing arrangements.
Key Advantages
- Genuine ABB System pro E power enclosure accessory for compatible low-voltage switchboards.
- IP65-designated configuration for appropriately designed enclosure assemblies.
- Manufacturer-specified open top/bottom arrangement.
- Designed for a 250 mm nominal enclosure width.
- Designed for a 700 mm nominal enclosure depth.
- 2 mm specified thickness in the manufacturer's designation.
- Supports modular electrical enclosure construction.
- Provides an application-specific component for compatible upper or lower enclosure arrangements.
- Helps panel builders select enclosure accessories using defined manufacturer dimensions.
- Designed for integration with compatible ABB System pro E power structural components.
- Suitable for industrial, commercial and infrastructure electrical distribution applications.
Key Features
- Manufacturer: ABB.
- Product range: System pro E power.
- Manufacturer type: 1STQ008446B0000.
- ABB order code: 1STQ008446B0000.
- Product designation: 2MM IP65 OPEN TOP/BOT. W250 D700.
- Product type: Open top/bottom enclosure component.
- Protection designation: IP65.
- Specified thickness: 2 mm.
- Nominal width: 250 mm.
- Nominal depth: 700 mm.
- Installation application: Compatible top or bottom enclosure arrangements.
- Designed for compatible ABB System pro E power switchboard structures.
- Supports modular low-voltage electrical distribution enclosure assembly.
- Dedicated enclosure accessory for professional electrical panel building.
Technical Specifications
- Manufacturer: ABB
- Product group: System pro E power
- Manufacturer type: 1STQ008446B0000
- ABB order code: 1STQ008446B0000
- SKU: 1STQ008446B0000
- Manufacturer designation: 2MM IP65 OPEN TOP/BOT. W250 D700
- Product category: Electrical switchboard enclosure accessories
- Product type: Open top/bottom enclosure component
- IP protection designation: IP65
- Specified thickness: 2 mm
- Nominal width: 250 mm
- Nominal depth: 700 mm
- Manufacturer configuration: Open top/bottom
- Compatible enclosure range: ABB System pro E power
- Equipment category: Low-voltage electrical distribution
- Primary application: Top or bottom enclosure integration in compatible modular electrical distribution switchboards
IP65 Open Top/Bottom Integration for System pro E Power Switchboards
The ABB 1STQ008446B0000 is intended for use within compatible ABB System pro E power electrical distribution enclosure assemblies. Top and bottom enclosure components are important elements of modular switchboard construction, helping panel builders configure the enclosure structure around the electrical equipment and its associated installation requirements.
The manufacturer's OPEN TOP/BOT. designation identifies an open top/bottom configuration. This distinguishes the accessory from fully closed enclosure components and makes it important to verify how the part interfaces with the intended switchboard structure. The designation does not, by itself, establish whether additional covers, plates, seals or other components are supplied or required.
The specified 250 mm width and 700 mm depth identify the nominal enclosure configuration for which the accessory is intended. These dimensions should be checked against the selected System pro E power structure, particularly when combining enclosure sections of different widths or depths.
The manufacturer's 2 mm specification forms part of the product designation. It should be used when identifying the correct ABB accessory, while the precise construction, material, surface finish and supplied fixing components should be confirmed using the relevant manufacturer documentation.
The IP65 designation is associated with dust-tight enclosure protection and resistance to water jets under the applicable IP classification. However, an open top/bottom component does not independently make a completed switchboard IP65. The protection achieved depends on the overall enclosure configuration, the treatment of openings and the correct installation of compatible sealing and closure components.
The ABB System pro E power range provides a modular platform for professional low-voltage switchboard construction. Its compatible structural components and enclosure accessories allow panel builders to develop application-specific assemblies with coordinated dimensions and installation arrangements. The 1STQ008446B0000 provides a designated option for the specified open top/bottom configuration.
Before installation, electrical panel builders should verify the enclosure model, top or bottom mounting position, dimensional compatibility, fixing requirements and any additional components needed to achieve the intended enclosure protection. The completed low-voltage switchboard should be designed and verified in accordance with applicable IEC 61439 requirements, with the required degree of protection assessed for the finished assembly.
Typical Applications
- ABB System pro E power low-voltage electrical distribution switchboards.
- Compatible switchboard assemblies requiring an open top/bottom enclosure configuration.
- Industrial electrical distribution panels and switchgear assemblies.
- Commercial building electrical distribution switchboards.
- Electrical switchrooms and plant room distribution installations.
- Manufacturing facility electrical distribution equipment.
- Modular enclosure construction using 250 mm wide and 700 mm deep configurations.
- Infrastructure electrical distribution installations.
- Professional electrical panel building and switchboard manufacturing.
- Compatible electrical enclosures requiring manufacturer-specific top or bottom accessories.
Frequently Asked Questions
What is the ABB 1STQ008446B0000 used for?
The ABB 1STQ008446B0000 is an IP65-designated open top/bottom enclosure component for compatible ABB System pro E power low-voltage electrical distribution switchboards. It is specified for a 250 mm wide and 700 mm deep enclosure configuration.
What are the dimensions and thickness of the ABB 1STQ008446B0000?
The manufacturer's designation specifies a width of 250 mm, a depth of 700 mm and a thickness of 2 mm. These specifications should be matched to the intended compatible System pro E power enclosure.
What does OPEN TOP/BOT. mean in the ABB 1STQ008446B0000 designation?
OPEN TOP/BOT. identifies the manufacturer's open top/bottom enclosure configuration. The exact installation position, required closure components and compatibility with the selected switchboard should be verified against ABB technical documentation.
Does the ABB 1STQ008446B0000 guarantee IP65 protection for the completed switchboard?
No. The component carries an IP65 designation, but the completed switchboard's degree of protection depends on the overall enclosure construction, treatment of openings and correct installation of compatible sealing and closure components. The final assembly must be assessed against its required IP rating.
Does the ABB 1STQ008446B0000 include a complete electrical enclosure?
No. The ABB 1STQ008446B0000 is an enclosure component, not a complete electrical switchboard. The compatible enclosure structure and any required fixing, sealing or additional closure accessories should be selected according to ABB documentation and the confirmed product contents.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power enclosure accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB 1STQ008446B0000 provides an IP65-designated open top/bottom enclosure component for compatible 250 mm wide and 700 mm deep configurations, helping electrical engineers and panel builders select manufacturer-specific components for properly designed electrical distribution assemblies.
