Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008444B0000 ABB System Pro E Power IP65 Open Top/Bottom Panel 250 × 300 mm 2 mm
ABB 1STQ008444B0000 System Pro E Power 2 mm thick IP65-designated open top/bottom enclosure panel for compatible 250 mm wide and 300 mm deep low-voltage switchboard sections, requiring suitable cable-entry flanges and sealing to achieve the intended ingress protection.
£66.82
Why Choose the ABB 1STQ008444B0000 System Pro E Power IP65 Open Top/Bottom Panel?
The ABB 1STQ008444B0000 is a 2 mm thick IP65-designated open top/bottom panel for the ABB System Pro E Power low-voltage switchboard system. Specified for a nominal enclosure width of 250 mm and depth of 300 mm, this accessory provides a dedicated enclosure covering for compatible modular electrical distribution assemblies.
Its open configuration accommodates a suitable cable-entry or enclosure interface arrangement, making it an alternative to a blind panel where an opening is required. The panel is intended for installation at the top or bottom of a compatible switchboard section, allowing electrical panel builders to configure enclosure access according to the requirements of the installation.
The ABB 1STQ008444B0000 is specified with a nominal 2 mm panel thickness and an IP65 protection designation. To achieve IP65 protection in the completed assembly, the opening must be appropriately covered and sealed using compatible fixed cable-entry flanges and other required enclosure components. The panel alone does not provide a complete IP65 barrier.
Key Advantages
- Genuine ABB System Pro E Power enclosure accessory.
- Designed for a nominal 250 mm wide × 300 mm deep switchboard section.
- 2 mm nominal panel thickness for a substantial enclosure component.
- Open top/bottom configuration supports planned cable-entry arrangements.
- IP65-designated for integration into appropriately sealed assemblies.
- Supports compatible fixed cable-entry flange installations.
- Suitable for top or bottom mounting in the specified enclosure system.
- Helps maintain coordinated enclosure construction within the ABB System Pro E Power range.
- Suitable for professional switchboard manufacturing, maintenance and refurbishment.
Key Features
- ABB System Pro E Power modular switchboard accessory.
- ABB order code: 1STQ008444B0000.
- Product designation: 2MM IP65 OPEN TOP/BOT. W250 D300.
- Open top/bottom enclosure panel configuration.
- 250 mm nominal enclosure width.
- 300 mm nominal enclosure depth.
- 2 mm nominal material thickness.
- IP65 protection designation for compatible complete assemblies.
- Open design accommodates an appropriate cable-entry or interface solution.
- Intended for integration with compatible System Pro E Power structural and enclosure components.
- Suitable for industrial and commercial low-voltage electrical distribution applications.
Open Panel Design for Controlled Cable Entry and Enclosure Integration
The ABB System Pro E Power platform provides modular enclosure components for low-voltage power distribution. Open top/bottom panels are used where a switchboard requires an engineered opening rather than a completely solid covering. For a nominal 250 mm wide and 300 mm deep section, the ABB 1STQ008444B0000 provides a panel configuration that can be incorporated into an appropriate cable-entry arrangement.
The IP65 designation relates to the intended protection level of a correctly assembled enclosure. IP65 means dust-tight protection and resistance to water jets under the relevant ingress protection classification. An open panel without suitable flanges and seals does not independently achieve this rating. The installer must select compatible cable-entry components and follow the applicable ABB assembly instructions to maintain the specified protection level.
Typical Applications
- ABB System Pro E Power low-voltage switchboard construction.
- Electrical distribution assemblies with nominal 250 × 300 mm enclosure sections.
- Industrial electrical control and distribution cabinets.
- Commercial building electrical distribution systems.
- Switchboard installations requiring a planned top or bottom opening.
- Compatible IP65-designated enclosures with correctly sealed cable-entry arrangements.
- OEM electrical panel building and modular switchboard manufacturing.
- Maintenance and replacement of compatible enclosure covering components.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ008444B0000 |
| Product designation | 2MM IP65 OPEN TOP/BOT. W250 D300 |
| Product type | Open top/bottom enclosure panel |
| Product category | Low-voltage switchboard enclosure accessories |
| Nominal enclosure width | 250 mm |
| Nominal enclosure depth | 300 mm |
| Nominal panel thickness | 2 mm |
| Protection designation | IP65 |
| Panel configuration | Open |
| Intended mounting position | Top or bottom |
| Ingress protection requirement | Compatible cable-entry components and correct sealing of the complete assembly |
| Application | Low-voltage electrical distribution enclosures |
| System compatibility | ABB System Pro E Power |
Frequently Asked Questions
What is the ABB 1STQ008444B0000 used for?
The ABB 1STQ008444B0000 is an open top/bottom enclosure panel for compatible ABB System Pro E Power low-voltage switchboards, providing an opening for a suitable cable-entry or enclosure interface arrangement.
What dimensions are specified for the ABB 1STQ008444B0000?
The panel is specified for a nominal 250 mm wide and 300 mm deep switchboard section, with a nominal material thickness of 2 mm. The width and depth refer to the compatible enclosure configuration rather than independently confirmed overall physical dimensions of the panel.
What is the difference between an open and a blind top/bottom panel?
An open top/bottom panel provides an opening for a compatible cable-entry or interface arrangement, while a blind panel provides a solid covering without an intentional opening. The correct option depends on the switchboard design and required cable routing.
Does the ABB 1STQ008444B0000 provide IP65 protection by itself?
No. Although the panel is designated for IP65 enclosure configurations, achieving that protection requires compatible fixed cable-entry flanges, suitable seals and correct installation of the complete switchboard. An exposed opening does not provide IP65 protection.
Can the ABB 1STQ008444B0000 be fitted at the top or bottom of a switchboard?
Yes. Its open top/bottom designation identifies it for either mounting position in a compatible ABB System Pro E Power enclosure arrangement. The complete installation must follow the applicable ABB assembly instructions.
Trusted ABB Switchboard Technology
ABB System Pro E Power enclosure accessories support coordinated low-voltage switchboard construction for professional electrical panel builders. The ABB 1STQ008444B0000 open top/bottom panel provides a dedicated 2 mm enclosure component for nominal 250 mm wide and 300 mm deep sections requiring an engineered cable-entry opening and correctly maintained ingress protection.
