Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008444A0000 PHCX4424 System Pro E Power horizontal installation kit for two compatible ABB Tmax XT4 three-pole or four-pole fixed or plug-in interlocked motor-operated circuit breakers in a nominal 600 mm wide and 500 mm high switchboard compartment, with a recessed mounting plate and separately specified interlocking hardware.
£167.52
The ABB 1STQ008444A0000, manufacturer type PHCX4424, is a dedicated horizontal installation kit for two ABB Tmax XT4 moulded case circuit breakers within the ABB System Pro E Power low-voltage switchboard system. It is specified for compatible 3-pole and 4-pole fixed or plug-in circuit breaker configurations.
Designed for a nominal 600 mm wide switchboard section, the PHCX4424 supports a coordinated mounting arrangement for two compatible Tmax XT4 circuit breakers. Its manufacturer designation, 2 XT4 KIT 3-4P FIX-PLUG IN IM H.W=600MM, identifies a horizontal installation configuration with an IM arrangement.
The PHCX4424 is a mechanical installation accessory rather than a complete circuit breaker assembly. It helps panel builders integrate compatible protection devices into System Pro E Power switchboards while allowing the circuit breakers, their connection accessories and any required interlocking components to be selected according to the complete electrical design.
The ABB PHCX4424 provides an application-specific mechanical installation arrangement for two compatible Tmax XT4 circuit breakers in a System Pro E Power switchboard. Its horizontal layout supports equipment positioning within a nominal 600 mm wide section, while the IM designation identifies the intended manufacturer configuration. The exact mechanical and electrical requirements must be checked against the corresponding ABB assembly instructions.
Fixed and plug-in circuit breakers use different connection arrangements, so the appropriate Tmax XT4 versions and any necessary plug-in bases, terminals, interlocking equipment or other accessories must be selected for the finished installation. Circuit breaker current ratings, breaking capacities and protection functions are determined by the separately specified breakers and trip units, not by the PHCX4424 mounting kit.
| Product group | System Pro E Power |
|---|---|
| Manufacturer type | PHCX4424 |
| ABB order code | 1STQ008444A0000 |
| Product designation | 2 XT4 KIT 3-4P FIX-PLUG IN IM H.W=600MM |
| Product type | Circuit breaker installation kit |
| Product category | Low-voltage switchboard accessories |
| Compatible circuit breaker family | ABB Tmax XT4 |
| Number of circuit breaker positions | 2 |
| Compatible pole configurations | 3P / 4P |
| Compatible breaker executions | Fixed / plug-in |
| Installation configuration | IM |
| Mounting orientation | Horizontal |
| Nominal switchboard width | 600 mm |
| Application | Low-voltage electrical distribution switchboards |
| System compatibility | ABB System Pro E Power |
The ABB PHCX4424 is a horizontal installation kit designed for two compatible ABB Tmax XT4 moulded case circuit breakers within System Pro E Power low-voltage switchboards.
The kit is specified for compatible ABB Tmax XT4 3-pole and 4-pole circuit breakers in fixed or plug-in executions. The exact breaker versions and accessories must match the applicable ABB installation instructions.
The PHCX4424 is specified for a nominal 600 mm wide System Pro E Power switchboard section. This is the compatible enclosure configuration width, not a confirmed overall physical dimension of the installation kit.
IM identifies the manufacturer-specified installation configuration for this kit. The precise arrangement and any associated interlocking requirements should be confirmed using the relevant ABB System Pro E Power installation documentation.
No. The ABB 1STQ008444A0000 is a mechanical installation kit rather than a complete circuit breaker assembly. Compatible Tmax XT4 breakers and any additional connection, plug-in or interlocking accessories must be selected separately according to the complete switchboard design.
ABB System Pro E Power installation accessories support coordinated low-voltage switchboard construction for professional electrical panel builders. The PHCX4424 provides a dedicated horizontal mounting solution for two compatible Tmax XT4 circuit breakers in fixed or plug-in configurations, supporting organised integration into nominal 600 mm wide switchboard sections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.