Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008438B0000 PTBO12912MM System Pro E Power 2 mm pickled sheet steel IP65-designated open bottom panel with sealing gasket for nominal 1000 mm wide and 900 mm deep switchboard enclosures incorporating an 800 mm equipment compartment and 200 mm internal cable compartment, requiring compatible fixed cable-entry flanges.
£326.92
The ABB 1STQ008438B0000, manufacturer type PTBO12912MM, is a 2 mm thick IP65-designated open bottom enclosure panel for the ABB System Pro E Power low-voltage switchboard range. It is designed for switchboard structures with a nominal width of 1000 mm and depth of 900 mm, incorporating an 800 mm equipment compartment and a 200 mm internal cable compartment.
Manufactured from pickled sheet steel and supplied with an IP65 sealing gasket, this panel provides a coordinated enclosure component for electrical distribution assemblies requiring separate equipment and internal cable-management spaces. Its open configuration accommodates the installation of suitable fixed cable-entry flanges, allowing the completed assembly to be configured for the required cable-routing arrangement.
The ABB PTBO12912MM is particularly suited to System Pro E Power switchboards with an internal cable compartment. To achieve the intended IP65 ingress protection, compatible fixed cable-entry flanges must be installed for both the equipment and cable compartments, together with all other required enclosure seals and components.
The ABB PTBO12912MM is intended for switchboard structures that divide a nominal 1000 mm total width into an 800 mm equipment compartment and a 200 mm internal cable compartment. This arrangement provides dedicated space for electrical equipment and internal cable routing within the same overall enclosure footprint. The specified 1000 mm width and 900 mm depth refer to the compatible switchboard configuration, rather than independently confirmed external measurements of the individual panel.
For an IP65 configuration, ABB specifies dedicated fixed cable-entry flanges for both compartments. For the stated compartment sizes, relevant flange dimensions are 800 × 900 mm for the equipment section and 200 × 900 mm for the internal cable section, subject to the required flange execution. The corresponding PFCF2091 is an ABB blind fixed flange for a 200 × 900 mm internal cable compartment. All flange selections and sealing arrangements should be verified against the complete switchboard design.
| Product group | System Pro E Power |
|---|---|
| Manufacturer type | PTBO12912MM |
| ABB order code | 1STQ008438B0000 |
| Product designation | 2MM IP65 OPEN BOT. W1000(800+200)D900CC |
| Product type | Open bottom enclosure panel |
| Catalogue family | Open top/bottom panels for internal cable compartments |
| Product category | Low-voltage switchboard enclosure accessories |
| Nominal total enclosure width | 1000 mm |
| Nominal equipment compartment width | 800 mm |
| Nominal internal cable compartment width | 200 mm |
| Nominal enclosure depth | 900 mm |
| Nominal panel thickness | 2 mm |
| Material | Pickled sheet steel |
| Protection designation | IP65 with appropriate sealing and fixed cable-entry flanges |
| Sealing | IP65 gasket |
| Panel configuration | Open |
| Specified application | Bottom enclosure covering with internal cable compartment |
| Compatible cable-entry accessory family | ABB PFCF fixed flanges |
| Catalogue supply quantity | 1 panel |
| System compatibility | ABB System Pro E Power |
The ABB 1STQ008438B0000 PTBO12912MM is an open bottom enclosure panel for compatible System Pro E Power switchboards with a nominal 1000 mm total width, 900 mm depth and an internal cable compartment.
It identifies a nominal 1000 mm wide and 900 mm deep enclosure configuration, divided into an 800 mm equipment compartment and a 200 mm internal cable compartment. The CC designation refers to the cable compartment arrangement.
The panel is manufactured from 2 mm thick pickled sheet steel and is specified with an IP65 sealing gasket for use in compatible enclosure assemblies.
No. The panel is designed for IP65 enclosure configurations, but achieving that protection requires suitable fixed cable-entry flanges for both the equipment compartment and internal cable compartment, together with correct installation and sealing of the complete switchboard.
The enclosure arrangement requires compatible fixed cable-entry flanges sized for the 800 × 900 mm equipment compartment and 200 × 900 mm internal cable compartment. ABB identifies the PFCF2091 as a blind fixed flange for the 200 × 900 mm cable compartment. The correct equipment-compartment flange and any other accessories must be selected for the finished assembly.
ABB System Pro E Power enclosure accessories provide coordinated solutions for professional low-voltage switchboard construction. The ABB 1STQ008438B0000 PTBO12912MM combines a 2 mm steel open panel, IP65 sealing gasket and compatibility with an 800 + 200 mm compartment arrangement to support properly engineered cable-entry and enclosure protection systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.