Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008437B0000 PTBO12902MM System Pro E Power 2 mm thick pickled sheet steel open top/bottom panel for nominal 1250 mm wide and 900 mm deep switchboard enclosures, requiring compatible fixed cable-entry flanges to achieve IP65 protection.
£355.96
The ABB 1STQ008437B0000 is a 2 mm thick IP65-designated open top/bottom enclosure panel for the ABB System Pro E Power low-voltage switchboard range. Designed for a nominal enclosure width of 1250 mm and depth of 900 mm, it provides an application-specific enclosure component for compatible modular electrical distribution assemblies.
Unlike a blind panel, the open top/bottom configuration provides an opening that can be incorporated into a suitable cable-entry or enclosure interface arrangement. This supports switchboard designs where services or compatible connecting components must pass through or interface with the top or bottom of the enclosure.
The ABB 1STQ008437B0000 combines a nominal 2 mm panel thickness with an IP65 protection designation for appropriately configured System Pro E Power assemblies. The stated width and depth identify the compatible enclosure size, not independently confirmed external dimensions of the individual panel. Final ingress protection depends on the complete installation, including how the opening is sealed or otherwise protected.
The ABB System Pro E Power platform uses coordinated structural and enclosure components to support configurable low-voltage electrical distribution assemblies. Open top/bottom panels are useful where a switchboard requires a planned opening rather than a continuous blind covering. Depending on the design, the opening may accommodate a compatible cable-entry system or another engineered enclosure interface.
The ABB 1STQ008437B0000 is specified for nominal 1250 mm wide and 900 mm deep switchboard configurations. IP65 denotes dust-tight protection and resistance to water jets for a correctly assembled enclosure. An exposed opening does not itself provide this protection, so suitable compatible components, seals and installation practices are necessary to achieve the intended ingress protection of the finished assembly.
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ008437B0000 |
| Product designation | 2MM IP65 OPEN TOP/BOT. W1250 D900 |
| Product type | Open top/bottom enclosure panel |
| Product category | Low-voltage switchboard enclosure accessories |
| Nominal enclosure width | 1250 mm |
| Nominal enclosure depth | 900 mm |
| Nominal panel thickness | 2 mm |
| Protection designation | IP65 |
| Panel configuration | Open |
| Intended mounting position | Top or bottom |
| Application | Low-voltage electrical distribution enclosures |
| System compatibility | ABB System Pro E Power |
The ABB 1STQ008437B0000 is an open top/bottom enclosure panel for compatible ABB System Pro E Power low-voltage switchboards requiring a planned opening for an appropriate cable-entry or enclosure interface arrangement.
The product is specified for a nominal 1250 mm wide and 900 mm deep enclosure configuration, with a nominal panel thickness of 2 mm. The width and depth describe the compatible switchboard size rather than independently verified physical measurements of the panel.
An open panel provides an opening for a suitable enclosure interface or entry arrangement, whereas a blind panel provides a solid covering without an intentional opening. The appropriate type depends on the switchboard layout and installation requirements.
No. The panel is designated for IP65 enclosure configurations, but the final protection level depends on the complete switchboard assembly. The opening must be appropriately protected or sealed using compatible components to achieve the required ingress protection.
Yes. Its open top/bottom designation identifies it for either mounting position within a compatible ABB System Pro E Power enclosure arrangement, subject to the relevant installation requirements.
ABB System Pro E Power enclosure accessories support coordinated low-voltage switchboard construction for professional electrical panel builders. The ABB 1STQ008437B0000 open top/bottom panel provides a dedicated enclosure component for compatible 1250 mm wide and 900 mm deep assemblies requiring an engineered opening and appropriately maintained ingress protection.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.