Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008430B0000 ABB System pro E Power IP65 Open Top/Bottom Panel 1000 x 900 mm
ABB 1STQ008430B0000 System pro E Power IP65 open top/bottom enclosure panel with a 2 mm thickness designation, designed for compatible 1000 mm wide and 900 mm deep low-voltage electrical distribution cabinets.
£323.71
Why Choose the ABB 1STQ008430B0000 System pro E Power IP65 Open Top/Bottom Panel?
The ABB 1STQ008430B0000 is a 2 mm open top/bottom enclosure panel designed for use with the ABB System pro E Power low-voltage distribution system. Intended for IP65 enclosure applications, this component provides an open panel configuration for compatible electrical cabinets, supporting the construction of modular power distribution and switchgear assemblies.
As part of the ABB System pro E Power range, this open top/bottom panel is intended for electrical panel builders, switchboard manufacturers and industrial installation engineers requiring system-compatible enclosure components. Unlike a blind closure panel, its open configuration provides an opening within the designated enclosure section, allowing the integration of suitable cable-entry arrangements or other compatible accessories according to the switchboard design.
Designed for an enclosure configuration with a 1000 mm nominal width and 900 mm nominal depth, the ABB 1STQ008430B0000 carries a 2 mm thickness designation and is intended for compatible IP65 System pro E Power assemblies. Its modular design supports professional electrical distribution installations where enclosure compatibility, installation flexibility and environmental protection are important considerations.
Key Advantages
- Designed for the ABB System pro E Power modular distribution system.
- Specified for IP65 enclosure applications when correctly installed within a compatible rated assembly.
- 1000 mm nominal enclosure width for compatible switchboard configurations.
- 900 mm nominal enclosure depth for the specified cabinet arrangement.
- 2 mm thickness designation for the enclosure component.
- Open panel configuration supports the integration of suitable cable-entry or enclosure accessories.
- Suitable for top or bottom enclosure installation according to the cabinet configuration.
- Supports flexible electrical cabinet assembly and installation planning.
- System-compatible design helps simplify enclosure component selection and integration.
Key Features
- ABB System pro E Power enclosure accessory.
- Open top/bottom panel for compatible low-voltage distribution cabinets.
- IP65 application designation.
- 1000 mm nominal enclosure width.
- 900 mm nominal enclosure depth.
- 2 mm manufacturer thickness designation.
- Open construction for suitable enclosure entry and accessory arrangements.
- Designed for integration into modular electrical distribution assemblies.
- Suitable for professional switchboard and electrical panel-building applications.
- Manufacturer order code 1STQ008430B0000.
Flexible Enclosure Integration for Electrical Distribution Systems
Low-voltage electrical distribution assemblies require correctly matched enclosure components to accommodate internal switchgear, circuit breakers, busbars and associated electrical equipment. Open top and bottom panels provide designated openings within compatible cabinet structures, allowing electrical panel builders to incorporate suitable cable-entry systems, closure accessories or other components required by the installation.
The ABB 1STQ008430B0000 is designed for compatible System pro E Power cabinets with a nominal width of 1000 mm and depth of 900 mm. Its open configuration supports flexible top or bottom enclosure arrangements in industrial and commercial distribution boards. Because the panel incorporates an opening, achieving IP65 protection requires the appropriate compatible closure or cable-entry components, correct sealing and installation in accordance with ABB assembly instructions. The open panel alone does not establish an IP65 seal.
Typical Applications
- ABB System pro E Power low-voltage distribution boards.
- Industrial electrical switchboards and power distribution cabinets.
- Main and sub-distribution electrical assemblies.
- Commercial and industrial power distribution installations.
- Top and bottom enclosure arrangements requiring suitable cable-entry provisions.
- Electrical switchgear and control panel construction.
- Modular enclosure assemblies designed for IP65 protection with appropriate accessories.
- Switchboard manufacturing, refurbishment and compatible enclosure component replacement.
Technical Specifications
| Series | System pro E Power |
|---|---|
| Model / order code | 1STQ008430B0000 |
| Product type | Open top/bottom enclosure panel |
| Product designation | 2MM IP65 OPEN TOP/BOT. W1000 D900 |
| Nominal enclosure width | 1000 mm |
| Nominal enclosure depth | 900 mm |
| Manufacturer thickness designation | 2 mm |
| IP protection application | IP65 |
| Panel configuration | Open |
| Installation position | Top or bottom of compatible enclosure |
| Mounting application | Enclosure top/bottom arrangement within System pro E Power assemblies |
| Product category | Electrical enclosure accessories |
| Application | Low-voltage electrical power distribution |
| Product group | System pro E Power |
Frequently Asked Questions
What is the ABB 1STQ008430B0000 used for?
The ABB 1STQ008430B0000 is an open top/bottom enclosure panel used in compatible ABB System pro E Power electrical distribution cabinets. It provides an open enclosure section for suitable entry or accessory arrangements within low-voltage switchboard assemblies.
What enclosure dimensions is this open panel designed for?
The panel is specified for a compatible enclosure configuration with a nominal 1000 mm width and 900 mm depth, with a manufacturer thickness designation of 2 mm.
Is the ABB 1STQ008430B0000 suitable for IP65 enclosures?
Yes. The component is designated for IP65 enclosure applications. However, because it is an open panel, the completed assembly requires suitable closure or cable-entry accessories and correct sealing to achieve the intended IP65 protection rating.
What is the difference between an open and a blind top/bottom panel?
An open top/bottom panel provides an opening for suitable enclosure entry or accessory arrangements, while a blind panel provides a solid closure without an intentional opening. The correct configuration depends on the electrical cabinet design and installation requirements.
Which ABB enclosure system is compatible with this panel?
The ABB 1STQ008430B0000 belongs to the System pro E Power product range, a modular system for low-voltage electrical distribution assemblies. Compatibility should be verified against the specific cabinet dimensions, configuration and required installation accessories.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure components provide coordinated solutions for professional low-voltage switchboard construction. The ABB 1STQ008430B0000 open top/bottom panel supports flexible assembly of compatible electrical distribution enclosures, helping panel builders integrate suitable cable-entry and enclosure accessories into organised, dependable power distribution installations.
