Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008422B0000 ABB System pro E Power IP65 Blind Top/Bottom Panel 800 x 300 mm
ABB 1STQ008422B0000 System pro E Power IP65 blind top/bottom panel with a 2 mm thickness designation, designed for compatible 800 mm wide and 300 mm deep low-voltage electrical distribution enclosures.
£181.60
Why Choose the ABB 1STQ008422B0000 System pro E Power IP65 Blind Top/Bottom Panel?
The ABB 1STQ008422B0000 is a blind top/bottom enclosure panel designed for use with the ABB System pro E Power low-voltage distribution system. Specified for IP65 enclosure applications, this component provides a solid closure arrangement for compatible electrical cabinets, supporting the construction of protected power distribution and switchgear assemblies.
As part of the ABB System pro E Power range, this blind panel is intended for electrical panel builders, switchboard manufacturers and industrial installation engineers requiring compatible enclosure components. Its unperforated construction helps close unused top or bottom enclosure openings, supporting the intended protection of internal electrical equipment against dust and water ingress when installed with the appropriate sealing arrangements.
Designed for an enclosure configuration with a 800 mm nominal width and 300 mm nominal depth, the ABB 1STQ008422B0000 carries the manufacturer designation 2MM IP65 Blind Top/Bot. It is suitable for compatible System pro E Power distribution cabinets where enclosure closure, modular compatibility and environmental protection are important design considerations.
Key Advantages
- Designed for the ABB System pro E Power modular distribution system.
- Specified for IP65 enclosure applications when correctly installed within a compatible rated assembly.
- 800 mm nominal enclosure width for compatible switchboard configurations.
- 300 mm nominal enclosure depth for the specified cabinet arrangement.
- 2 mm thickness designation for the enclosure panel.
- Solid blind panel construction provides a closed enclosure section without intentional openings.
- Suitable for top or bottom enclosure installation according to the cabinet configuration.
- Supports protection of internal electrical components against environmental exposure.
- System-compatible design helps simplify enclosure assembly and component selection.
Key Features
- ABB System pro E Power enclosure accessory.
- Blind top/bottom panel for compatible low-voltage distribution cabinets.
- IP65 application designation.
- 800 mm nominal enclosure width.
- 300 mm nominal enclosure depth.
- 2 mm manufacturer thickness designation.
- Unperforated design for closed enclosure arrangements.
- Designed for integration into modular electrical distribution assemblies.
- Suitable for professional electrical panel-building applications.
- Manufacturer order code 1STQ008422B0000.
Reliable Enclosure Protection for Electrical Distribution Systems
Low-voltage electrical distribution assemblies require correctly matched enclosure components to provide physical protection for internal switchgear, circuit breakers, busbars and associated electrical equipment. Blind top and bottom panels close unused cabinet openings, helping maintain the intended enclosure arrangement and limiting exposure to external environmental conditions.
The ABB 1STQ008422B0000 is designed for compatible System pro E Power cabinets with a nominal width of 800 mm and depth of 300 mm. Its solid construction supports the creation of closed top or bottom enclosure sections. Achieving IP65 protection depends on the complete cabinet configuration, correct installation, suitable sealing components and compliance with the applicable ABB assembly instructions.
Typical Applications
- ABB System pro E Power low-voltage distribution boards.
- Industrial electrical switchboards and distribution cabinets.
- Main and sub-distribution electrical assemblies.
- Commercial and industrial power distribution installations.
- Top and bottom closure of compatible modular enclosures.
- Electrical switchgear and control panel construction.
- Enclosure assemblies requiring IP65 protection arrangements.
- Switchboard refurbishment and replacement of compatible enclosure panels.
Technical Specifications
| Series | System pro E Power |
|---|---|
| Model / order code | 1STQ008422B0000 |
| Product type | Blind top/bottom enclosure panel |
| Product designation | 2MM IP65 BLIND TOP/BOT. W800 D300 |
| Nominal enclosure width | 800 mm |
| Nominal enclosure depth | 300 mm |
| Manufacturer thickness designation | 2 mm |
| IP protection application | IP65 |
| Panel configuration | Blind / solid |
| Installation position | Top or bottom of compatible enclosure |
| Mounting application | Enclosure closure within System pro E Power assemblies |
| Product category | Electrical enclosure accessories |
| Application | Low-voltage electrical power distribution |
| Product group | System pro E Power |
Frequently Asked Questions
What is the ABB 1STQ008422B0000 used for?
The ABB 1STQ008422B0000 is a blind top/bottom enclosure panel used to close compatible ABB System pro E Power electrical distribution cabinets, supporting the construction of protected low-voltage switchboard assemblies.
What enclosure dimensions is this blind panel designed for?
The panel is specified for a compatible enclosure configuration with a nominal 800 mm width and 300 mm depth, with a manufacturer thickness designation of 2 mm.
Is the ABB 1STQ008422B0000 suitable for IP65 enclosures?
Yes. The component is designated for IP65 enclosure applications. The final protection rating depends on correct installation within a compatible cabinet using the required sealing components and assembly procedures.
Can this panel be installed at the top or bottom of an electrical cabinet?
Yes. The product is identified as a blind top/bottom panel for compatible ABB System pro E Power enclosure configurations. The installation position and fixing arrangement must follow the relevant ABB assembly instructions.
Which ABB enclosure system is compatible with this panel?
The ABB 1STQ008422B0000 belongs to the System pro E Power product range, a modular system for low-voltage electrical distribution assemblies. Compatibility should be verified against the specific cabinet dimensions and configuration.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure components provide coordinated solutions for professional low-voltage switchboard construction. The ABB 1STQ008422B0000 blind top/bottom panel supports the assembly of compatible IP65 distribution enclosures, helping electrical panel builders achieve organised, protected and dependable electrical installations.
