Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008413A0000 PHBX2431 System Pro E Power horizontal installation kit for two compatible ABB Tmax XT2 3-pole or 4-pole plug-in moulded case circuit breakers in a 400 mm wide low-voltage switchboard section.
£162.22
The ABB 1STQ008413A0000, also identified as PHBX2431, is a dedicated horizontal circuit breaker installation kit designed for the ABB System Pro E Power low-voltage switchboard range. It is intended for the installation of two compatible ABB Tmax XT2 plug-in moulded case circuit breakers within a modular electrical distribution assembly, supporting professional switchboard construction and efficient equipment integration.
As part of the ABB System Pro E Power series, the PHBX2431 provides an application-specific mechanical mounting arrangement for compatible 3-pole and 4-pole ABB Tmax XT2 circuit breakers. Its design supports horizontal positioning of two plug-in breaker units within a coordinated switchboard compartment, helping electrical panel builders create organised and maintainable low-voltage distribution systems.
Designed for a nominal 400 mm wide switchboard section, the ABB PHBX2431 is suitable for compatible Tmax XT2 plug-in configurations with the installation arrangement identified by ABB as 2 XT2 KIT 3-4P PLUG IN I HORIZ. W=400MM. The kit provides a practical mounting solution for industrial and commercial power distribution applications where multiple circuit breakers must be integrated into a compact switchboard layout.
The ABB PHBX2431 installation kit provides a dedicated mechanical arrangement for mounting two compatible Tmax XT2 plug-in moulded case circuit breakers within a System Pro E Power switchboard. Moulded case circuit breakers are commonly used to protect low-voltage electrical circuits against overloads and short circuits, with the specific protection characteristics determined by the selected breaker and trip unit.
The plug-in execution allows compatible circuit breakers to connect through their designated plug-in bases, while the PHBX2431 provides the installation arrangement required for the specified horizontal switchboard configuration. Correct selection of the circuit breakers, plug-in bases, electrical connections and associated mounting components is essential for a complete installation. The PHBX2431 is a mechanical installation kit and does not itself provide electrical protection or switching functionality.
| Series | System Pro E Power |
|---|---|
| Model / type | PHBX2431 |
| ABB order code | 1STQ008413A0000 |
| Product designation | 2 XT2 KIT 3-4P PLUG IN I HORIZ. W=400MM |
| Product type | Circuit breaker installation kit |
| Product category | Low-voltage switchboard accessories |
| Compatible circuit breaker family | ABB Tmax XT2 |
| Number of circuit breaker positions | 2 |
| Compatible number of poles | 3 / 4 |
| Circuit breaker execution | Plug-in |
| Installation configuration | I |
| Mounting orientation | Horizontal |
| Nominal switchboard width | 400 mm |
| Application | Low-voltage electrical distribution switchboards |
| System compatibility | ABB System Pro E Power |
The ABB PHBX2431 is a horizontal installation kit designed for mounting two compatible ABB Tmax XT2 plug-in moulded case circuit breakers within System Pro E Power low-voltage switchboard assemblies.
The kit is specified for compatible ABB Tmax XT2 plug-in circuit breakers in 3-pole and 4-pole configurations. The exact breaker versions, plug-in bases and associated accessories must be selected according to ABB installation requirements.
The product designation identifies an installation arrangement for two ABB Tmax XT2 circuit breakers. It is designed to accommodate the specified compatible plug-in breaker configurations within a coordinated horizontal switchboard layout.
The PHBX2431 is specified for a nominal 400 mm wide switchboard section within the ABB System Pro E Power range. Other enclosure dimensions and mounting requirements depend on the complete switchboard configuration.
No. The ABB 1STQ008413A0000 is a mechanical installation kit rather than a complete circuit breaker assembly. Compatible Tmax XT2 breakers, plug-in bases and any additional required electrical or mechanical accessories must be selected separately.
ABB System Pro E Power installation accessories provide electrical panel builders and industrial engineers with coordinated solutions for professional low-voltage switchboard construction. The ABB PHBX2431 horizontal installation kit supports the integration of two compatible Tmax XT2 plug-in circuit breakers, helping create organised, accessible and maintainable electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.