Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008402B0000 ABB System pro E Power IP65 Blind Top/Bottom Panel 2 mm 400 x 300 mm
ABB 1STQ008402B0000 System pro E Power 2 mm IP65-designated blind top/bottom enclosure panel with nominal dimensions of 400 mm wide by 300 mm deep for compatible low-voltage main distribution board assemblies.
£100.29
Why Choose the ABB 1STQ008402B0000 System pro E Power IP65 Blind Top/Bottom Panel?
The ABB 1STQ008402B0000 is a 2 mm blind top/bottom enclosure panel designed for compatible ABB System pro E Power low-voltage main distribution boards. Specified for IP65 enclosure configurations, this component has nominal dimensions of 400 mm wide × 300 mm deep, providing a solid closure solution for professional electrical switchboard construction.
As part of the ABB System pro E Power range, this blind top/bottom panel supports modular enclosure construction where protection of internal electrical equipment and effective closure of enclosure openings are important. Its blind design provides a solid panel surface without designated cable-entry openings, making it suitable for compatible top or bottom enclosure positions.
Identified by ABB manufacturer order code 1STQ008402B0000, this component is intended for professional panel builders, electrical contractors and switchgear manufacturers. Its specified 2 mm thickness, 400 × 300 mm dimensions and IP65 configuration help simplify the selection of suitable enclosure accessories for industrial and commercial electrical distribution installations.
Key Advantages
- Purpose-designed blind top/bottom panel for ABB System pro E Power distribution boards.
- Specified for IP65 enclosure configurations when correctly assembled with compatible components.
- 2 mm specified thickness for the designated enclosure panel.
- 400 mm width and 300 mm depth for compatible switchboard structures.
- Blind panel design provides a solid enclosure closure without designated cable-entry openings.
- Suitable for designated top or bottom enclosure positions.
- Supports coordinated modular construction of low-voltage main distribution boards.
- Genuine ABB component identified by order code 1STQ008402B0000.
Key Features
- ABB System pro E Power main distribution board accessory.
- Blind top/bottom enclosure panel configuration.
- 2 mm specified panel thickness.
- 400 mm nominal width.
- 300 mm nominal depth.
- IP65 designated enclosure protection configuration.
- Solid panel design for compatible enclosure closure applications.
- Intended for corresponding top or bottom positions in System pro E Power structures.
- Supports enclosure assembly where a blind closure is required.
- Suitable for industrial and commercial low-voltage electrical distribution applications.
- ABB manufacturer order code 1STQ008402B0000.
IP65 Blind Top and Bottom Enclosure Protection
The ABB System pro E Power platform supports modular construction of low-voltage main distribution boards using coordinated structural components, enclosure panels, doors and accessories. Correct selection of top and bottom panels is important for completing the enclosure and achieving the intended environmental protection of the electrical equipment installed inside.
The ABB 1STQ008402B0000 is specified as a 2 mm blind top/bottom panel with nominal dimensions of 400 mm wide × 300 mm deep. Its blind configuration provides a solid closure for compatible enclosure positions where a cable-entry opening or ventilated panel arrangement is not required.
An IP65 enclosure classification indicates dust-tight protection and protection against water jets when the complete enclosure has been correctly designed, assembled and assessed to that rating. The finished protection level depends on the enclosure structure, panel joints, sealing arrangements, fixings, cable entries and installation conditions.
This blind panel is an enclosure component rather than a complete IP65 electrical distribution board. Its exact mounting compatibility and any required seals, fixings or additional accessories should be confirmed against the applicable ABB System pro E Power assembly documentation. The ingress protection of the completed switchboard must be verified as part of the complete installation.
Typical Applications
- ABB System pro E Power main distribution board construction.
- Compatible enclosure structures with 400 mm width and 300 mm depth.
- Blind closure of designated top enclosure positions.
- Blind closure of designated bottom enclosure positions.
- Industrial low-voltage electrical distribution cabinets.
- Commercial building main electrical distribution systems.
- Professional switchgear manufacturing and electrical panel-building projects.
- Compatible switchboard assemblies designed for IP65 protection.
- Maintenance and replacement of corresponding ABB top/bottom enclosure panels.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008402B0000 |
| Product type | Blind top/bottom enclosure panel |
| Product family | Main distribution board enclosure panels and accessories |
| Panel configuration | Blind / solid |
| Installation designation | Top/bottom |
| Specified thickness | 2 mm |
| Nominal width | 400 mm |
| Nominal depth | 300 mm |
| Nominal dimensions (W × D) | 400 × 300 mm |
| Specified IP configuration | IP65 |
| IP65 dust protection | Dust-tight enclosure classification |
| IP65 water protection | Protection against water jets in a correctly rated complete enclosure |
| Compatible system | ABB System pro E Power |
| Suitable product class | Low-voltage main distribution boards |
| Application | Blind closure of compatible top or bottom enclosure positions |
| Manufacturer description | 2MM IP65 BLIND TOP/BOT. W400 D300 |
Frequently Asked Questions
What is the ABB 1STQ008402B0000 used for?
The ABB 1STQ008402B0000 is a 2 mm blind top/bottom enclosure panel designed to provide a solid closure for compatible ABB System pro E Power low-voltage main distribution board assemblies.
What are the dimensions of the ABB 1STQ008402B0000 panel?
The panel has nominal dimensions of 400 mm in width and 300 mm in depth, with a specified thickness of 2 mm.
Can the ABB 1STQ008402B0000 be used at the top or bottom of an enclosure?
Yes. The manufacturer's TOP/BOT. designation identifies this product as a blind top/bottom panel. Compatibility with the specific enclosure structure and mounting arrangement should be verified against ABB System pro E Power documentation.
Does the ABB 1STQ008402B0000 provide IP65 protection?
The panel is specified for IP65 enclosure configurations. IP65 indicates dust-tight protection and protection against water jets, but the complete switchboard must use compatible panels, seals, fixings and enclosure components to achieve that rating.
Does the ABB 1STQ008402B0000 include a complete enclosure?
No. The 1STQ008402B0000 is a blind top/bottom panel component, not a complete electrical enclosure. Compatible structural components and any required mounting or sealing accessories must be selected according to the full switchboard assembly specification.
Designed for Professional Electrical Panel Builders
ABB System pro E Power enclosure accessories support the construction of modular low-voltage main distribution boards for industrial and commercial applications. The ABB 1STQ008402B0000 provides a dedicated 2 mm blind top/bottom panel solution for compatible 400 × 300 mm enclosure arrangements, supporting coordinated switchboard construction and appropriately configured IP65 installations.
