Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008387B0000 ABB System pro E Power 2 mm IP65 Blind Top/Bottom Panel 1000 x 300 mm
ABB System pro E Power 2 mm thick IP65 blind top/bottom panel specified for compatible low-voltage electrical distribution switchboard enclosures with a nominal width of 1000 mm and depth of 300 mm.
£211.50
Why Choose the ABB System pro E Power 2 mm IP65 Blind Top/Bottom Panel?
The ABB 1STQ008387B0000 is a 2 mm thick IP65 blind top/bottom panel designed for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Specified for enclosure configurations measuring 1000 mm wide × 300 mm deep, this accessory provides a solid covering solution for the top or bottom of appropriately configured modular electrical cabinets.
As part of the ABB System pro E Power range, this blind panel supports modular switchboard construction by providing a dedicated enclosure component for compatible cabinet arrangements. Its solid, non-perforated configuration is intended for installations where a closed top or bottom surface is required rather than a panel incorporating designated ventilation or cable-entry openings.
Identified by manufacturer order code 1STQ008387B0000, the panel is designated for IP65 enclosure configurations, supporting electrical switchboard designs requiring protection against dust ingress and water jets. The completed enclosure's ingress protection performance depends on the correct selection and installation of compatible structural components, seals, fixings and associated accessories in accordance with ABB documentation.
Key Advantages
- Purpose-designed blind top/bottom panel for ABB System pro E Power switchboards.
- Specified for IP65 enclosure configurations.
- 1000 mm nominal width for compatible switchboard structures.
- 300 mm nominal depth for appropriately sized enclosure arrangements.
- 2 mm nominal thickness as identified in the ABB product designation.
- Solid blind configuration without designated ventilation or cable-entry openings.
- Provides an external covering component for compatible cabinet top or bottom arrangements.
- Supports modular construction using appropriately selected ABB enclosure accessories.
- Helps establish a defined enclosure boundary around installed electrical distribution equipment.
- Designed for integration with the ABB System pro E Power modular enclosure platform.
- Suitable for compatible industrial and commercial low-voltage switchboard installations.
Key Features
- ABB System pro E Power enclosure accessory range.
- Blind top/bottom panel configuration.
- 2 mm nominal panel thickness.
- IP65 designated enclosure protection configuration.
- 1000 mm nominal enclosure width.
- 300 mm nominal enclosure depth.
- Solid panel design without designated openings.
- Intended for compatible top or bottom enclosure covering arrangements.
- Designed for modular low-voltage electrical distribution switchboards.
- Supports integration with appropriately selected mounting and sealing components.
- Provides a dedicated enclosure covering element for compatible electrical cabinet structures.
- Manufacturer order code: 1STQ008387B0000.
Top and Bottom Enclosure Protection for Low-Voltage Power Distribution
Industrial and commercial electrical distribution switchboards require correctly specified enclosure components to provide a physical boundary around installed electrical equipment. The ABB 1STQ008387B0000 blind top/bottom panel provides a dedicated solid covering solution for compatible System pro E Power switchboard structures with a 1000 mm width and 300 mm depth. Its blind configuration is suited to enclosure sections where designated top or bottom openings are not required.
The ABB System pro E Power platform supports modular switchboard construction using compatible frames, panels, doors and installation accessories. This 2 mm IP65 blind top/bottom panel forms part of the enclosure arrangement but does not independently establish the ingress protection rating of the completed switchboard. Correct panel positioning, mounting hardware, sealing arrangements and compatibility with the selected cabinet configuration must be verified against the applicable ABB assembly instructions. The panel is an enclosure accessory and does not independently provide electrical switching, overload protection or short-circuit protection.
Typical Applications
- ABB System pro E Power low-voltage switchboard assemblies.
- Industrial electrical distribution cabinets.
- Commercial building main and sub-distribution switchboards.
- Compatible IP65 electrical enclosure configurations.
- Solid top covering arrangements for modular electrical cabinets.
- Solid bottom covering arrangements for compatible switchboard structures.
- Electrical distribution enclosures with compatible 1000 mm width and 300 mm depth configurations.
- Industrial power distribution and electrical control assemblies.
- Electrical panel-building and switchboard manufacturing projects.
- Compatible enclosure replacement and refurbishment installations.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008387B0000 |
| Product type | Blind top/bottom enclosure panel |
| Panel configuration | Solid / blind |
| Installation position | Top or bottom of compatible enclosure arrangements |
| Nominal thickness | 2 mm |
| Nominal width | 1000 mm |
| Nominal depth | 300 mm |
| Specified dimensions | 1000 × 300 mm (W × D) |
| Designated enclosure protection rating | IP65 |
| IP65 classification | Dust-tight and protected against water jets |
| Compatible system | ABB System pro E Power |
| Product category | Low-voltage switchboard top and bottom enclosure panels |
| Primary function | Solid covering panel for compatible switchboard top or bottom configurations |
| Application | Industrial and commercial low-voltage electrical distribution switchboards |
Frequently Asked Questions
What is the ABB 1STQ008387B0000 used for?
The ABB 1STQ008387B0000 is a blind top/bottom enclosure panel designed for compatible ABB System pro E Power low-voltage electrical switchboards. It provides a solid covering component for suitable top or bottom electrical cabinet arrangements.
What are the dimensions of the ABB 1STQ008387B0000 blind panel?
The panel is specified for a nominal width of 1000 mm and a nominal depth of 300 mm, with a thickness of 2 mm. The manufacturer's description identifies the dimensions as width and depth rather than height and width.
What does the IP65 designation mean for this ABB top/bottom panel?
The IP65 designation identifies an enclosure protection configuration that is dust-tight and protected against water jets. The completed switchboard must use compatible panels, seals, fixings and other enclosure components to achieve its intended protection rating.
Does the ABB 1STQ008387B0000 include ventilation or cable-entry openings?
The ABB 1STQ008387B0000 is designated as a blind panel, indicating a solid covering configuration without designated ventilation or cable-entry openings. Applications requiring cable access or ventilation should use appropriately specified enclosure components.
What should be checked before installing the ABB 1STQ008387B0000?
Verify the 1000 mm nominal width, 300 mm nominal depth, compatibility with the selected System pro E Power enclosure, the intended top or bottom installation position, and the required mounting and sealing accessories. Follow the applicable ABB installation instructions to maintain the intended IP65 enclosure configuration.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support electrical engineers, industrial panel builders and switchboard manufacturers in constructing modular low-voltage electrical distribution assemblies. The ABB 1STQ008387B0000 2 mm IP65 blind top/bottom panel provides a dedicated solid enclosure covering component for compatible 1000 × 300 mm switchboard configurations, supporting structured cabinet assembly, enclosure integration and professional electrical distribution panel construction.
