Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008356B0000 ABB System pro E Power 2 mm IP65 External Power Component H1800 D200
ABB 1STQ008356B0000 is a 2 mm IP65 external power enclosure component from the System pro E Power range, designed for compatible low-voltage switchboard configurations with a nominal height of 1800 mm and depth of 200 mm.
£184.89
Why Choose the ABB 1STQ008356B0000 IP65 External Power Enclosure Component?
The ABB 1STQ008356B0000 is a dedicated 2 mm IP65 external power enclosure component for the ABB System pro E Power low-voltage switchboard system. Specified for an enclosure configuration with a nominal height of 1800 mm and depth of 200 mm, this accessory is intended for compatible electrical power distribution assemblies requiring an external enclosure component.
Part of the ABB System pro E Power range, this component provides a manufacturer-specific solution for professional switchboard construction. Its official designation, 2MM_IP65 EXTERNAL POWER H=1800 D=200, identifies the specified thickness, IP65 protection configuration, external power designation and nominal enclosure dimensions.
The ABB 1STQ008356B0000 is suitable for electrical panel builders, switchboard manufacturers and installation engineers working with compatible System pro E Power cabinets. Its 1800 mm height and 200 mm depth designation supports accurate accessory selection for the intended enclosure arrangement, while its IP65 designation identifies suitability for appropriately configured dust-tight and water-jet-resistant switchboard assemblies.
Key Advantages
- Purpose-designed external power enclosure component for ABB System pro E Power.
- Specified for compatible IP65 enclosure protection configurations.
- Designed for 1800 mm high and 200 mm deep enclosure arrangements.
- Features a manufacturer-designated 2 mm thickness.
- Provides a dedicated ABB accessory for compatible low-voltage power distribution assemblies.
- Supports professional modular switchboard construction.
- Helps maintain the intended external enclosure arrangement when correctly installed.
- Supports accurate component selection using manufacturer-defined dimensions.
- Can contribute to a protected switchboard assembly when used with the required compatible components.
- Suitable for industrial, commercial and infrastructure electrical distribution projects.
Key Features
- ABB System pro E Power enclosure accessory.
- ABB manufacturer order code: 1STQ008356B0000.
- External power component designation for compatible switchboard assemblies.
- 2 mm specified thickness.
- 1800 mm nominal enclosure height.
- 200 mm nominal enclosure depth.
- Designated for compatible IP65 enclosure arrangements.
- Designed for integration into modular low-voltage electrical distribution systems.
- Supports the external mechanical configuration of a compatible power switchboard.
- Suitable for professional electrical panel manufacturing and assembly.
- Requires appropriate compatible mounting and sealing arrangements in accordance with the selected enclosure design.
- Passive enclosure accessory without an independently specified electrical switching or circuit protection function.
External Power Enclosure Integration for IP65 Switchboards
The ABB 1STQ008356B0000 external power component is intended for compatible System pro E Power switchboards where the manufacturer's specified external enclosure arrangement is required. Its designation distinguishes it from standard blind doors, glazed doors and other enclosure accessories. The exact mounting position and component geometry should be confirmed against the applicable ABB assembly documentation rather than inferred solely from the abbreviated product name.
The manufacturer's IP65 designation identifies the enclosure protection configuration for which this accessory is specified. Under IEC 60529, IP65 denotes a dust-tight enclosure with protection against water jets. Achieving this level of protection depends on the complete switchboard assembly, including the enclosure structure, component interfaces, seals, fixings, doors and any other relevant openings. The external power component alone does not establish the IP65 rating of the finished installation.
The specified 1800 mm height, 200 mm depth and 2 mm thickness are important selection criteria when matching this accessory to an ABB System pro E Power enclosure. The product designation does not state a width, so a width should not be assumed. Before installation, panel builders should verify the intended mounting location, compatible enclosure frame, fixing requirements, sealing arrangements and any additional accessories using the relevant ABB technical documentation.
Typical Applications
- ABB System pro E Power low-voltage switchboard assemblies.
- 1800 mm high and 200 mm deep enclosure configurations.
- Compatible IP65 electrical distribution cabinet arrangements.
- External power enclosure configurations within modular switchboards.
- Industrial low-voltage power distribution installations.
- Commercial building electrical distribution systems.
- Manufacturing facility electrical switchboard assemblies.
- Infrastructure and plant electrical distribution projects.
- OEM electrical panel and switchboard manufacturing.
- Replacement or refurbishment of compatible System pro E Power external enclosure components.
Technical Specifications
| Series | System pro E Power |
|---|---|
| Manufacturer order code | 1STQ008356B0000 |
| Product designation | 2MM_IP65 EXTERNAL POWER H=1800 D=200 |
| Product type | External power enclosure component |
| Product category | Electrical switchboard enclosure accessories |
| Manufacturer configuration | External power |
| Specified thickness | 2 mm |
| Nominal enclosure height | 1800 mm |
| Nominal enclosure depth | 200 mm |
| Designated protection configuration | IP65 |
| Compatible enclosure system | ABB System pro E Power |
| Component function | External enclosure component for a compatible power distribution assembly |
| Installation application | Low-voltage electrical switchboard enclosure assembly |
| Electrical function | Passive enclosure accessory |
Frequently Asked Questions
What is the ABB 1STQ008356B0000 used for?
The ABB 1STQ008356B0000 is an external power enclosure component for compatible ABB System pro E Power low-voltage switchboards. It is specified for an 1800 mm high and 200 mm deep enclosure configuration designed for IP65 protection.
What are the specified dimensions of the ABB 1STQ008356B0000?
The manufacturer's designation specifies a 1800 mm nominal height, 200 mm nominal depth and 2 mm thickness. No width is stated in the supplied designation. These values identify the intended configuration rather than a complete set of external product measurements.
What does external power mean in the ABB product designation?
External power is the manufacturer's configuration designation for this System pro E Power enclosure component. It identifies the accessory as part of an external power enclosure arrangement. The exact component geometry, mounting location and compatible cabinet configuration should be confirmed using the relevant ABB assembly documentation.
Does the ABB 1STQ008356B0000 provide IP65 protection on its own?
No. The component is designated for IP65 enclosure configurations, but the finished protection rating depends on the complete switchboard assembly. IP65 indicates dust-tight protection and resistance to water jets when the enclosure is correctly designed, assembled and installed with all required sealing and fixing components.
Are mounting hardware and seals included with the ABB 1STQ008356B0000?
The supplied product designation identifies the 2 mm IP65 external power component but does not confirm whether mounting hardware, seals or other installation accessories are included. The exact supplied contents and any additional components required should be verified against the relevant ABB System pro E Power documentation.
Trusted by Electrical Switchboard Builders Worldwide
ABB System pro E Power enclosure accessories support modular, professional and maintainable low-voltage electrical distribution assemblies. The 1STQ008356B0000 provides a dedicated 2 mm external power enclosure component for compatible 1800 mm high and 200 mm deep IP65 switchboard configurations, supporting electrical panel manufacturers, contractors and industrial installation engineers.
