Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB System Pro E Power 2 mm thick IP65 glazed enclosure door, order code 1STQ008350B0000, featuring a 36 DIN configuration designation and nominal dimensions of 2000 mm height and 1000 mm width for compatible low-voltage switchboards requiring a transparent viewing area.
£1,643.60
The ABB 1STQ008350B0000 is a 2 mm thick IP65 glazed enclosure door from the ABB System Pro E Power range, designed for compatible low-voltage electrical switchboard assemblies. Specified with a 36 DIN configuration, a nominal height of 2000 mm and a width of 1000 mm, this door provides a dedicated glazed access solution for corresponding ABB electrical distribution enclosures.
The ABB System Pro E Power glazed door incorporates a transparent viewing area, allowing suitably positioned electrical protection devices, monitoring instruments and control components to be visually inspected while the enclosure remains closed. Compared with a conventional solid blind door, this arrangement supports convenient observation of internal equipment and can reduce unnecessary opening of switchboard compartments during routine visual checks.
With its 2 mm specified thickness, 2000 × 1000 mm nominal dimensions, 36 DIN designation and compatibility with IP65 enclosure configurations, the ABB 1STQ008350B0000 is an application-specific component for professional switchboard manufacturers. It supports coordinated enclosure construction in industrial, commercial and infrastructure electrical distribution installations where equipment visibility, appropriate enclosure protection and practical maintenance access are important.
Low-voltage electrical switchboards frequently contain circuit protection devices, measuring instruments, control components and status indicators that benefit from regular observation. A glazed enclosure door provides a transparent viewing area through which suitably positioned equipment can be inspected while the enclosure remains closed. This can be particularly useful in distribution systems where operators need to check visible equipment indications without unnecessarily accessing the internal switchboard compartment.
The ABB 1STQ008350B0000 combines a 36 DIN configuration designation with a 2 mm thick glazed door for compatible 2000 mm high and 1000 mm wide System Pro E Power assemblies. Its IP65 designation identifies the intended enclosure protection arrangement, but the completed switchboard must incorporate the appropriate frame, glazing interfaces, seals, hinges, locking hardware, cable entries and adjoining enclosure components to achieve the specified protection level. The door alone does not independently guarantee IP65 performance. The precise 36 DIN arrangement, internal equipment layout and required installation accessories should be confirmed against the applicable ABB technical documentation.
| Product range | System Pro E Power |
|---|---|
| ABB order code | 1STQ008350B0000 |
| Product description | 2 mm IP65 Glazed Door 36 DIN H2000 W1000 |
| Product type | Switchboard enclosure door |
| Door design | Glazed |
| Viewing arrangement | Transparent viewing area |
| Specified door thickness | 2 mm |
| Nominal door height | 2000 mm |
| Nominal door width | 1000 mm |
| Nominal door dimensions | 2000 × 1000 mm |
| DIN configuration designation | 36 DIN |
| Associated enclosure protection rating | IP65 |
| IP65 protection designation | Dust-tight and protected against water jets when incorporated into a correctly assembled and rated enclosure |
| Installation location | Compatible switchboard front opening |
| System compatibility | ABB System Pro E Power |
| Equipment category | Switchboard enclosure doors and accessories |
| Application | Low-voltage switchboard access, enclosure closure and visual equipment inspection |
The ABB 1STQ008350B0000 is a glazed enclosure door designed for compatible ABB System Pro E Power low-voltage switchboards requiring an IP65 enclosure configuration, a 36 DIN designation and nominal door dimensions of 2000 × 1000 mm.
The door has a nominal height of 2000 mm, width of 1000 mm and specified thickness of 2 mm.
The ABB 1STQ008350B0000 has a specified door thickness of 2 mm.
The product specification identifies a 36 DIN configuration associated with this glazed door. The precise DIN arrangement, equipment capacity and compatible internal layout should be confirmed against the relevant ABB System Pro E Power assembly documentation rather than inferred from the designation alone.
A glazed switchboard door provides a transparent viewing area that allows suitably positioned internal equipment, instrument displays and status indicators to be visually inspected while the door remains closed. Actual visibility depends on the glazing arrangement and internal equipment layout.
Yes. The product is specified for compatible IP65 ABB System Pro E Power enclosure configurations. The completed enclosure must be correctly assembled with the appropriate frame, seals, glazing interfaces and other required components to achieve the intended protection rating.
IP65 indicates dust-tight protection and protection against water jets under the applicable IP code test conditions. This rating applies to the complete correctly assembled enclosure rather than to an individual glazed door in isolation.
Yes. The transparent viewing area allows visual observation of suitably positioned internal electrical devices while the door remains closed. The equipment visible depends on the switchboard layout, the glazing arrangement and the position of the installed components.
The supplied product specification identifies the glazed door but does not confirm whether hinges, locks, seals or other fixing accessories are included. Any required components should be verified against the relevant ABB product and assembly documentation.
No. Matching nominal dimensions alone does not establish compatibility. The door is intended for corresponding ABB System Pro E Power configurations, and the enclosure frame, mounting arrangement, glazing clearance and associated hardware must be checked before selection.
The manufacturer's order code is 1STQ008350B0000, identifying the ABB System Pro E Power 2 mm thick IP65 glazed door with a 36 DIN designation, nominal height of 2000 mm and nominal width of 1000 mm.
ABB System Pro E Power glazed enclosure doors and accessories support coordinated low-voltage switchboard construction, helping electrical engineers, panel builders and switchgear manufacturers combine equipment visibility, practical enclosure access and compatible environmental protection arrangements in professionally assembled electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.