Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008347B0000 ABB 2 mm IP65 Glazed Door 24 DIN 2000 x 1000 mm System Pro E Power
ABB 1STQ008347B0000 is a 2 mm IP65 glazed door for compatible System Pro E Power low-voltage switchgear enclosure configurations, specified for a 24 DIN arrangement with a nominal height of 2000 mm and width of 1000 mm.
£1,643.60
Why Choose the ABB 2 mm IP65 Glazed Door 24 DIN H=2000 W=1000?
The ABB 1STQ008347B0000 is a dedicated 2 mm IP65 glazed enclosure door from the ABB System Pro E Power low-voltage switchgear range. Specified for a nominal height of 2000 mm and width of 1000 mm, this accessory features a glazed front configuration and is identified for a 24 DIN arrangement within compatible modular electrical distribution enclosures.
Designed for professional switchboard construction, the ABB 1STQ008347B0000 provides a manufacturer-designated front closure for compatible System Pro E Power assemblies. Its 2 mm specified thickness, IP65 enclosure configuration and 2000 × 1000 mm nominal dimensions make it a clearly identifiable option for electrical panel builders, switchgear manufacturers and installation engineers.
The glazed design incorporates a transparent viewing section, allowing suitably positioned meters, indicators and other electrical equipment to be observed without opening the enclosure. Identified by ABB order code 1STQ008347B0000, this door is intended for compatible 24 DIN System Pro E Power configurations. The protection level of the completed enclosure depends on the correct selection and installation of compatible enclosure components, glazing interfaces, seals and closure hardware.
Key Advantages
- Dedicated ABB System Pro E Power glazed enclosure door for compatible low-voltage switchgear assemblies.
- Specified for IP65 enclosure configurations.
- 2 mm nominal thickness identified in the manufacturer specification.
- 2000 mm nominal height for the designated enclosure arrangement.
- 1000 mm nominal width for compatible modular switchgear sections.
- Glazed front design provides a transparent viewing area for suitably positioned equipment.
- Identified for a 24 DIN configuration.
- Can support visual inspection of meters, indicators and equipment status without routinely opening the enclosure.
- Purpose-designated for integration with the ABB System Pro E Power modular switchgear platform.
- Suitable for professional industrial and commercial electrical distribution board construction.
Key Features
- ABB System Pro E Power modular switchgear enclosure accessory.
- 1STQ008347B0000 ABB manufacturer order code.
- Glazed enclosure door configuration.
- 2 mm specified thickness.
- IP65 enclosure protection configuration designation.
- 2000 mm nominal door height.
- 1000 mm nominal door width.
- 24 DIN manufacturer configuration designation.
- Transparent viewing section for compatible equipment arrangements.
- Designed for compatible System Pro E Power enclosure assemblies.
- Suitable for modular low-voltage switchgear front closure applications.
- Compatible hinges, seals, locking arrangements and mounting requirements to be verified against ABB technical documentation.
IP65 Glazed Door Integration for 2000 × 1000 mm Switchgear Enclosures
The ABB System Pro E Power range provides a modular platform for professional low-voltage electrical distribution assemblies. Its enclosure accessories allow panel builders to select compatible front closures, mounting arrangements and structural components according to the intended switchgear configuration.
The ABB 1STQ008347B0000 is specified as a 2 mm glazed door for an IP65 enclosure configuration. Unlike a blind door, a glazed door incorporates a transparent viewing section. This can be useful where operators need to observe compatible meters, indicators or other equipment without opening the switchgear enclosure.
The manufacturer description includes the designation 24 DIN. This identifies the intended DIN-related configuration of the accessory but does not independently establish the exact number of DIN rail modules, the internal equipment capacity or the precise layout of compatible mounting components. These characteristics should be confirmed using the relevant ABB System Pro E Power technical drawings and assembly documentation.
The specified 2000 mm nominal height and 1000 mm nominal width help identify the intended enclosure arrangement and distinguish this accessory from other door sizes in the System Pro E Power range. These figures should not automatically be interpreted as exact external measurements, glazing dimensions, hinge positions or required installation clearances. Similarly, the stated 2 mm thickness does not independently establish the thickness or material of the transparent glazing.
The IP65 designation is associated with dust-tight enclosure protection and resistance to water jets under the applicable IP classification test conditions. Achieving this protection level in the completed assembly requires compatible enclosure components, correctly fitted seals and glazing interfaces, suitable closure hardware and installation in accordance with ABB instructions. The 1STQ008347B0000 is an enclosure door accessory rather than a complete switchgear cabinet, and the inclusion of hinges, locks, seals or separate mounting hardware must be confirmed using ABB documentation.
Typical Applications
- ABB System Pro E Power low-voltage switchgear enclosures.
- Compatible IP65 electrical enclosure configurations.
- 24 DIN modular switchgear arrangements specified by ABB.
- Industrial electrical distribution board construction.
- Commercial building power distribution enclosures.
- Switchgear installations requiring a transparent viewing section.
- Compatible 2000 × 1000 mm nominal door arrangements.
- Distribution boards containing equipment intended for observation through a glazed door.
- Professional electrical panel building and switchgear manufacturing.
- Maintenance and replacement of compatible System Pro E Power glazed enclosure doors.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ008347B0000 |
| Manufacturer description | 2MM_IP65 GL.DOOR 24 DIN H=2000 W=1000 |
| Product type | Glazed enclosure door |
| Product category | Low-voltage switchgear enclosure accessories |
| Door design | Glazed / transparent viewing section |
| Specified thickness | 2 mm |
| IP configuration | IP65 |
| DIN configuration designation | 24 DIN |
| Nominal height | 2000 mm |
| Nominal width | 1000 mm |
| Nominal size designation | 2000 × 1000 mm |
| Installation system | ABB System Pro E Power |
| Intended mounting location | Compatible enclosure door opening |
| Application | Glazed front closure of compatible modular low-voltage switchgear enclosures |
| Associated hardware | As specified in the applicable ABB enclosure assembly instructions |
Frequently Asked Questions
What is the ABB 1STQ008347B0000 used for?
The ABB 1STQ008347B0000 is a 2 mm IP65 glazed enclosure door intended for compatible ABB System Pro E Power low-voltage switchgear configurations. It is specified for a 24 DIN arrangement with a nominal door height of 2000 mm and width of 1000 mm.
What are the dimensions of the ABB 1STQ008347B0000 glazed door?
The manufacturer specifies a nominal height of 2000 mm, a nominal width of 1000 mm and a 2 mm thickness designation. Exact external dimensions, glazing measurements, hinge positions and mounting clearances should be confirmed using ABB technical drawings.
Does the ABB 1STQ008347B0000 provide IP65 protection?
The door is specified for an IP65 enclosure configuration. Achieving IP65 protection in the completed assembly depends on compatible enclosure components, glazing interfaces, seals, closure hardware and correct installation. The door alone does not guarantee IP65 protection for an incomplete enclosure.
What does 24 DIN mean on the ABB 1STQ008347B0000?
24 DIN is the manufacturer configuration designation included in the product description. It identifies the intended DIN-related arrangement, but the supplied specification does not establish the exact number of DIN rail modules, internal equipment positions or mounting capacity. These details should be verified using ABB System Pro E Power documentation.
Does the ABB 1STQ008347B0000 include hinges, locks and seals?
The supplied manufacturer description identifies the product as a 2 mm IP65 glazed door for a 24 DIN configuration but does not confirm the inclusion of hinges, locks, seals or separate mounting hardware. The supplied components and any additional accessories required for installation should be verified against ABB's official product documentation.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power provides a modular platform for professional low-voltage switchgear construction. The 1STQ008347B0000 glazed door offers a manufacturer-specified 2 mm front closure for compatible 24 DIN, 2000 × 1000 mm IP65 enclosure configurations, combining a transparent viewing section with the flexibility of modular electrical distribution board assembly.
