Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008344B0000 System pro E Power 2 mm IP65-designated glazed door with a 12 DIN configuration and nominal dimensions of 2000 mm high by 400 mm wide for compatible low-voltage main distribution board enclosures.
£748.23
The ABB 1STQ008344B0000 is a 2 mm IP65 glazed door with a 12 DIN configuration, designed for compatible ABB System pro E Power low-voltage main distribution board enclosures. With nominal dimensions of 2000 mm high × 400 mm wide, this component provides a dedicated glazed door solution for professional electrical switchboard construction.
As part of the ABB System pro E Power range, this glazed door supports the construction of electrical distribution assemblies where equipment visibility, enclosure protection and controlled access are important. Its glazed design provides a viewing area for observing compatible internal electrical equipment without opening the enclosure.
Identified by ABB manufacturer order code 1STQ008344B0000, the door is specified for IP65 enclosure configurations and features the manufacturer's 12 DIN designation. Its defined dimensions and system-specific configuration make it suitable for compatible industrial and commercial low-voltage switchboard installations.
The ABB System pro E Power platform supports modular construction of low-voltage main distribution boards using coordinated enclosure structures, panels, doors and installation accessories. Selecting the correct door configuration is important for completing a switchboard enclosure and achieving the intended access and environmental protection requirements.
The ABB 1STQ008344B0000 combines a glazed door design with the manufacturer's specified 12 DIN configuration. Its nominal 2000 × 400 mm dimensions are intended for corresponding System pro E Power enclosure structures. The viewing area allows personnel to observe suitable internal equipment while the enclosure remains closed.
An IP65 classification indicates dust-tight protection and protection against water jets when the complete enclosure has been correctly designed, assembled and assessed to that rating. The finished enclosure's protection level depends on the compatible structure, glazing, seals, hinges, locking hardware, cable entries and installation conditions.
The glazed door is an enclosure component rather than a complete IP65 distribution board. The precise 12 DIN arrangement, mounting compatibility and any required additional hardware should be checked against the applicable ABB System pro E Power assembly documentation. The complete switchboard must be assessed for its intended installation environment.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008344B0000 |
| Product type | Glazed enclosure door |
| Product family | Main distribution board doors and enclosure accessories |
| Door design | Glazed / viewing door |
| Manufacturer DIN configuration | 12 DIN |
| Specified thickness | 2 mm |
| Nominal height | 2000 mm |
| Nominal width | 400 mm |
| Nominal dimensions (H × W) | 2000 × 400 mm |
| Specified IP configuration | IP65 |
| IP65 dust protection | Dust-tight enclosure classification |
| IP65 water protection | Protection against water jets in a correctly rated complete enclosure |
| Compatible system | ABB System pro E Power |
| Suitable product class | Low-voltage main distribution boards |
| Application | Glazed door closure for compatible electrical switchboard enclosures |
| Manufacturer description | 2MM_IP65 GL.DOOR 12 DIN H=2000 W=400 |
The ABB 1STQ008344B0000 is a 2 mm IP65-designated glazed door with a 12 DIN configuration, designed for compatible System pro E Power low-voltage main distribution board enclosures.
The door has nominal dimensions of 2000 mm in height and 400 mm in width, with a specified thickness of 2 mm.
12 DIN is the manufacturer's specified configuration for this glazed door. The precise modular arrangement and compatibility with internal equipment should be verified against the applicable ABB System pro E Power installation documentation.
The door is specified for IP65 enclosure configurations. IP65 indicates dust-tight protection and protection against water jets, but the completed switchboard must use compatible glazing, seals, hardware and enclosure components to achieve that rating.
No. The 1STQ008344B0000 is a glazed door component for compatible ABB System pro E Power assemblies. The enclosure structure and any additional required mounting, locking or sealing accessories must be selected according to the complete switchboard configuration.
ABB System pro E Power enclosure components support professional electrical panel builders in constructing modular low-voltage main distribution boards. The ABB 1STQ008344B0000 provides a dedicated 2 mm glazed door solution with a 12 DIN configuration for compatible 2000 × 400 mm switchboard structures, supporting equipment visibility and appropriately configured IP65 enclosure installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.