Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB System pro E Power 2 mm thick IP65 glass door with a 12 DIN arrangement designation and nominal dimensions of 2000 × 600 mm, designed for compatible low-voltage electrical distribution switchboard enclosures.
£1,340.56
The ABB 1STQ008342B0000 is a 2 mm thick IP65 glass door for a 12 DIN configuration, designed for compatible ABB System pro E Power low-voltage electrical distribution switchboards. With nominal dimensions of 2000 mm high × 600 mm wide, this glazed enclosure door provides a dedicated access solution for modular electrical distribution cabinets.
As part of the ABB System pro E Power range, this glass door is identified for a 12 DIN arrangement, supporting integration into compatible modular switchboard configurations. Its glazed design allows suitably positioned internal electrical equipment to be viewed while the door remains closed, making it useful for installations where visual inspection of distribution components is desirable.
Specified for IP65 enclosure configurations, the ABB 1STQ008342B0000 is intended for electrical assemblies requiring protection against dust ingress and water jets. The completed enclosure's ingress protection performance depends on the correct selection and installation of compatible cabinet structures, glazing seals, hinges, closing mechanisms and associated accessories in accordance with ABB documentation.
Low-voltage electrical distribution switchboards often contain circuit breakers, protective devices, measuring instruments and monitoring equipment that benefit from visual inspection. The ABB 1STQ008342B0000 glass door provides a glazed access solution for compatible 2000 × 600 mm System pro E Power switchboard configurations, with a manufacturer designation identifying a 12 DIN arrangement. This supports modular cabinet layouts where suitably positioned internal equipment needs to remain visible without opening the enclosure door.
The ABB System pro E Power platform supports modular switchboard construction using compatible frames, panels, doors and installation accessories. This 2 mm IP65 glass door forms part of the enclosure arrangement but does not independently establish the ingress protection rating of the completed switchboard. The exact 12 DIN configuration, glazing seals, hinges, closing mechanisms, mounting accessories and enclosure compatibility must be verified against the applicable ABB assembly instructions. The door is an enclosure accessory and does not independently provide electrical switching, overload protection or short-circuit protection.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008342B0000 |
| Product type | Glass enclosure door |
| Door configuration | Glazed / glass door |
| DIN arrangement designation | 12 DIN |
| Nominal thickness | 2 mm |
| Nominal height | 2000 mm |
| Nominal width | 600 mm |
| Nominal dimensions | 2000 × 600 mm (H × W) |
| Designated enclosure protection rating | IP65 |
| IP65 classification | Dust-tight and protected against water jets |
| Compatible system | ABB System pro E Power |
| Product category | Low-voltage switchboard glazed enclosure doors |
| Primary function | Glazed access door for compatible modular electrical distribution enclosures |
| Application | Industrial and commercial low-voltage electrical distribution switchboards |
The ABB 1STQ008342B0000 is a glass door designed for compatible ABB System pro E Power low-voltage electrical switchboards. It provides a glazed enclosure access component for a designated 12 DIN arrangement, allowing suitably positioned internal equipment to be viewed while the door remains closed.
The door has nominal dimensions of 2000 mm high × 600 mm wide, with a specified thickness of 2 mm in the ABB product designation.
The 12 DIN designation identifies the modular arrangement associated with this door in the ABB product description. The exact compatible DIN configuration and equipment layout should be verified against the applicable ABB System pro E Power technical documentation.
The IP65 designation identifies an enclosure protection configuration that is dust-tight and protected against water jets. The completed switchboard must use compatible components, glazing seals and appropriate door closing arrangements to achieve its intended protection rating.
Verify the 2000 × 600 mm nominal dimensions, the designated 12 DIN arrangement, compatibility with the selected System pro E Power enclosure, and the required hinges, closing mechanism, glazing seals and mounting accessories. Follow the applicable ABB installation instructions to maintain the intended IP65 enclosure configuration.
ABB System pro E Power enclosure accessories support electrical engineers, industrial panel builders and switchboard manufacturers in constructing modular low-voltage electrical distribution assemblies. The ABB 1STQ008342B0000 2 mm IP65 glass door provides a dedicated glazed enclosure component for compatible 2000 × 600 mm switchboard configurations with a 12 DIN designation, supporting visual equipment inspection, organised enclosure access and professional electrical cabinet construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.