Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008339B0000 is a 2 mm IP65 glazed enclosure door from the System pro E Power range, designed for compatible 36 DIN-module low-voltage switchboard configurations with a nominal height of 1800 mm and width of 1000 mm.
£1,480.74
The ABB 1STQ008339B0000 is a dedicated 2 mm IP65 glazed enclosure door for the ABB System pro E Power low-voltage switchboard system. Specified for a nominal enclosure height of 1800 mm and width of 1000 mm, this door is designed for compatible electrical distribution assemblies incorporating 36 DIN-module arrangements.
As part of the ABB System pro E Power range, this glazed door provides a manufacturer-specific enclosure solution for professional electrical switchboard construction. Its official designation, 2MM_IP65 GL.DOOR 36 DIN H=1800 W=1000, identifies the specified thickness, IP65 protection configuration, glazed door design, DIN-module arrangement and nominal enclosure dimensions.
Unlike a solid blind door, the ABB 1STQ008339B0000 glazed door incorporates a viewing area that can support visual inspection of equipment inside a compatible switchboard without routinely opening the enclosure. This makes it particularly useful for distribution assemblies where circuit identification, device status or equipment condition needs to be checked while maintaining the intended closed-door enclosure arrangement.
The ABB 1STQ008339B0000 is intended for compatible System pro E Power switchboards requiring a glazed enclosure door. The viewing area offers a practical advantage where operators or maintenance personnel need to inspect visible circuit identification, device indications or equipment status without opening the switchboard solely for a visual check. The actual visibility of individual devices depends on their position within the completed assembly and the glazed area's arrangement.
The manufacturer's IP65 designation identifies the protection configuration for which the door is specified. Under IEC 60529, IP65 denotes a dust-tight enclosure with protection against water jets. The finished switchboard achieves its applicable protection rating only when all required enclosure components, glazing interfaces, seals, hinges, closing mechanisms and other relevant accessories are correctly selected and installed. The individual door does not independently establish the IP65 rating of the complete assembly.
The specified 1800 mm height, 1000 mm width, 2 mm thickness and 36 DIN-module designation are important criteria when selecting this accessory. The 36 DIN reference identifies the manufacturer's intended modular arrangement; it should not be interpreted as a confirmed number of devices supplied with the door. Before installation, panel builders should verify the enclosure frame, door mounting requirements, opening direction, sealing arrangements and compatibility with the selected modular equipment using the applicable ABB System pro E Power documentation.
| Series | System pro E Power |
|---|---|
| Manufacturer order code | 1STQ008339B0000 |
| Product designation | 2MM_IP65 GL.DOOR 36 DIN H=1800 W=1000 |
| Product type | Glazed enclosure door |
| Product category | Electrical switchboard enclosure accessories |
| Door design | Glazed / viewing door |
| Specified thickness | 2 mm |
| Nominal enclosure height | 1800 mm |
| Nominal enclosure width | 1000 mm |
| DIN-module designation | 36 DIN modules |
| Designated protection configuration | IP65 |
| Compatible enclosure system | ABB System pro E Power |
| Component function | Enclosure closure with a viewing area for internal equipment |
| Installation application | Compatible low-voltage switchboard door assemblies |
| Electrical function | Passive mechanical enclosure accessory |
The ABB 1STQ008339B0000 is a glazed enclosure door for compatible ABB System pro E Power low-voltage switchboards. It is specified for an 1800 mm high and 1000 mm wide enclosure arrangement with an IP65 configuration and a 36 DIN-module designation.
The manufacturer's designation specifies a 1800 mm nominal height, 1000 mm nominal width and 2 mm thickness. These values identify the intended enclosure configuration and do not necessarily represent every external measurement of the individual door.
36 DIN is the manufacturer's DIN-module configuration designation for this glazed door. It is relevant when matching the accessory to a compatible modular switchboard layout and does not indicate that 36 electrical devices are included.
No. The door is designated for IP65 enclosure configurations, but the completed switchboard must be correctly assembled to achieve the required protection rating. IP65 indicates dust-tight protection and resistance to water jets, with the final performance depending on the complete enclosure, glazing interfaces, seals and associated hardware.
The manufacturer's designation identifies a 2 mm IP65 glazed door for a 36 DIN-module configuration, but it does not confirm the inclusion of hinges, locks, seals, electrical devices or other installation accessories. The exact supplied contents and any additional components required should be verified against the relevant ABB System pro E Power documentation.
ABB System pro E Power enclosure accessories support modular, professional and maintainable low-voltage electrical distribution assemblies. The 1STQ008339B0000 provides a dedicated 2 mm glazed door for compatible 1800 mm high and 1000 mm wide IP65 switchboard configurations with a 36 DIN-module designation, supporting electrical panel manufacturers, contractors and industrial installation engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.