Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008338B0000 is a 2 mm thick IP65 glazed enclosure door measuring 1800 mm high and 750 mm wide for compatible ABB System pro E power low-voltage electrical distribution cabinets.
£1,291.69
The ABB 1STQ008338B0000 is a 2 mm thick IP65 glazed enclosure door designed for compatible ABB System pro E power low-voltage electrical distribution cabinets. Featuring nominal dimensions of 1800 mm high × 750 mm wide, this door provides a protective front closure with a viewing area for industrial switchgear and electrical distribution enclosures.
As part of the ABB System pro E power range, this glazed door combines enclosure protection with convenient visibility of internal electrical equipment. Its glazed construction allows operators and maintenance personnel to inspect compatible circuit breakers, meters, control devices and status indicators without routinely opening the cabinet, supporting efficient equipment monitoring and maintenance planning.
The door is specified for IP65 enclosure configurations, supporting dust-tight protection and resistance to water jets when correctly installed as part of a compatible enclosure assembly. With its 1800 × 750 mm nominal dimensions and 2 mm thickness, the ABB 1STQ008338B0000 is suitable for corresponding System pro E power cabinet arrangements used in industrial and commercial electrical installations.
Glazed electrical enclosure doors are used where equipment visibility and environmental protection are both important. The viewing area enables inspection of compatible internal devices, such as circuit breakers, measuring instruments and status indicators, without routinely opening the electrical cabinet. This can be particularly useful in industrial switchgear rooms and commercial distribution installations where equipment condition needs to be checked regularly.
The ABB 1STQ008338B0000 is intended for compatible 1800 × 750 mm System pro E power enclosure arrangements. Its IP65 specification must be considered in relation to the complete cabinet assembly, including the door installation, glazing seals, gaskets, hinges, fastening components and cable entries. The finished enclosure must be correctly configured and assembled to achieve the required environmental protection.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ008338B0000 |
| Product type | Glazed enclosure door |
| Product category | Electrical enclosure doors |
| Door configuration | Glazed / viewing door |
| Nominal door thickness | 2 mm |
| Nominal height | 1800 mm |
| Nominal width | 750 mm |
| Dimensions (H × W) | 1800 × 750 mm |
| Specified protection rating | IP65 |
| Enclosure system | ABB System pro E power |
| Intended use | Protective glazed front closure for compatible electrical distribution enclosures |
| ABB product group | System Pro E Power |
The ABB 1STQ008338B0000 is an IP65 glazed enclosure door designed for compatible ABB System pro E power electrical distribution cabinets requiring an 1800 × 750 mm door configuration.
The door has a nominal height of 1800 mm, a width of 750 mm and a specified thickness of 2 mm.
The door is specified for an IP65 enclosure configuration. The protection rating of the finished installation depends on correct assembly with compatible enclosure components and sealing arrangements.
IP65 indicates dust-tight protection and resistance to water jets under the applicable test conditions. The complete cabinet must be correctly assembled to achieve its specified protection level.
A glazed enclosure door provides a viewing area for checking compatible internal equipment, meters and status indicators without routinely opening the electrical cabinet.
The door belongs to the ABB System pro E power range of modular low-voltage electrical distribution enclosure products.
No universal compatibility should be assumed. The door is intended for suitable ABB System pro E power cabinet configurations, and the enclosure structure, hinges, seals and fastening arrangements must be checked before installation.
The ABB manufacturer order code is 1STQ008338B0000.
ABB System pro E power enclosure accessories support professional low-voltage switchgear construction and modular electrical distribution systems. The ABB 1STQ008338B0000 glazed door provides a 2 mm thick protective viewing closure for compatible 1800 × 750 mm IP65 enclosure configurations, supporting electrical panel builders, switchgear manufacturers and maintenance professionals working with industrial and commercial distribution cabinets.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.