Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008337B0000 ABB IP65 Glazed Door 24 DIN H1800 W600 2mm – System pro E power
ABB 1STQ008337B0000 System pro E power IP65-designated glazed electrical enclosure door with a specified 2 mm thickness, 1800 mm height, 600 mm width and 24 DIN configuration reference for compatible low-voltage distribution switchboards.
£1,190.27
Why Choose the ABB 1STQ008337B0000 IP65 Glazed Door?
The ABB 1STQ008337B0000 is a dedicated IP65 glazed switchboard door from the ABB System pro E power range, designed for compatible low-voltage electrical distribution enclosures. Identified by the manufacturer's designation 2MM_IP65 GL.DOOR 24 DIN H=1800 W=600, this accessory features a 2 mm specified thickness, an 1800 mm height and a 600 mm width.
The glazed door design allows visual inspection of equipment installed behind the door without routinely opening the enclosure. This can be particularly useful in electrical distribution applications where operators need to view circuit breaker positions, indicator lights, measuring instruments or other visible components, subject to the internal equipment layout.
Designed for compatible ABB System pro E power switchboard structures, the door carries an IP65 designation and a 24 DIN manufacturer configuration reference. It offers a practical enclosure accessory for professional panel builders constructing industrial and commercial electrical distribution assemblies where equipment visibility, controlled access and environmental protection are important design considerations.
Key Advantages
- Genuine ABB System pro E power enclosure accessory for compatible low-voltage switchboards.
- IP65-designated glazed door for applications requiring a suitable degree of enclosure protection.
- Glazed construction supports visual inspection of installed electrical equipment.
- 1800 mm nominal height for the specified enclosure configuration.
- 600 mm nominal width for compatible switchboard structures.
- 2 mm specified thickness in the manufacturer's product designation.
- 24 DIN configuration reference for identifying the intended switchboard arrangement.
- Supports professional enclosure assembly and organised electrical distribution layouts.
- Helps reduce the need to open the door solely to view visible equipment indications.
- Suitable for industrial, commercial and infrastructure switchboard applications.
Key Features
- Manufacturer: ABB.
- Product range: System pro E power.
- Manufacturer reference: 1STQ008337B0000.
- ABB order code: 1STQ008337B0000.
- Product designation: 2MM_IP65 GL.DOOR 24 DIN H=1800 W=600.
- Product type: Glazed electrical enclosure door.
- Protection designation: IP65.
- Specified thickness: 2 mm.
- Door height: 1800 mm.
- Door width: 600 mm.
- Manufacturer configuration reference: 24 DIN.
- Door configuration: Glazed.
- Designed for compatible ABB System pro E power switchboard enclosures.
- Supports visual observation of equipment located behind the glazed section.
- Intended for professional low-voltage electrical distribution panel construction.
Technical Specifications
- Manufacturer: ABB
- Product group: System pro E power
- Manufacturer type: 1STQ008337B0000
- ABB order code: 1STQ008337B0000
- SKU: 1STQ008337B0000
- Manufacturer designation: 2MM_IP65 GL.DOOR 24 DIN H=1800 W=600
- Product category: Electrical switchboard enclosure accessories
- Product type: Glazed enclosure door
- IP protection designation: IP65
- Specified thickness: 2 mm
- Nominal height: 1800 mm
- Nominal width: 600 mm
- DIN configuration reference: 24 DIN
- Door design: Glazed
- Compatible enclosure range: ABB System pro E power
- Equipment category: Low-voltage electrical distribution
- Primary application: Enclosure door installation for compatible electrical distribution switchboards
IP65 Glazed Door Integration for Electrical Distribution Switchboards
The ABB 1STQ008337B0000 glazed door is intended for use with compatible ABB System pro E power electrical distribution enclosures. In low-voltage switchboard construction, enclosure doors form part of the physical boundary around electrical equipment, supporting controlled access to installed components and contributing to the protection provided by the complete assembly.
The manufacturer's IP65 designation identifies a protection level associated with dust-tight construction and resistance to water jets under the relevant IP classification. However, the protection achieved by a completed switchboard depends on the compatibility and correct installation of the door, enclosure frame, seals, hinges, closing arrangements and other enclosure components. The door's designation alone does not establish the IP rating of an assembled switchboard.
The glazed construction provides a viewing area through which suitably positioned internal components may be observed. Depending on the finished switchboard design, this can allow operators to inspect visible device positions, status indicators and instruments without opening the enclosure. Actual visibility depends on the glazing area and the arrangement of the equipment behind the door.
With a specified 1800 mm height and 600 mm width, the door is intended for a corresponding compatible enclosure configuration. The manufacturer's 24 DIN reference should be used when checking compatibility with the intended System pro E power arrangement; it should not be treated as confirmation of the number of DIN-rail devices or modules that can be installed without consulting ABB's technical documentation.
The 2 mm specification forms part of the manufacturer's product designation. The exact construction details, glazing material, door hardware and supplied accessories should be confirmed against the applicable ABB product documentation before procurement or installation.
The ABB System pro E power range is designed for modular low-voltage electrical distribution assemblies. Compatible enclosure components, mounting systems, doors and accessories allow panel builders to configure switchboards for different applications. The 1STQ008337B0000 provides a glazed door option for the specified enclosure dimensions and configuration.
Before installation, panel builders should verify the enclosure series, dimensional compatibility, opening arrangement, fixing components, sealing requirements and any necessary door accessories. The completed switchboard should be designed and verified in accordance with applicable IEC 61439 requirements, with its required enclosure protection assessed for the finished assembly.
Typical Applications
- ABB System pro E power low-voltage electrical distribution switchboards.
- Compatible electrical enclosures requiring an IP65-designated glazed door.
- Industrial power distribution panels.
- Commercial building electrical distribution assemblies.
- Electrical switchrooms and plant room switchboards.
- Manufacturing facility electrical distribution equipment.
- Switchboards where visible device indications need to be observed through a closed door.
- Infrastructure electrical distribution installations.
- Professional electrical panel building and modular enclosure assembly.
- Compatible switchboard configurations requiring an 1800 mm high and 600 mm wide glazed door.
Frequently Asked Questions
What is the ABB 1STQ008337B0000 used for?
The ABB 1STQ008337B0000 is an IP65-designated glazed enclosure door for compatible ABB System pro E power low-voltage electrical distribution switchboards. Its specified dimensions are 1800 mm high and 600 mm wide.
What are the dimensions and thickness of the ABB 1STQ008337B0000?
The manufacturer's designation specifies a height of 1800 mm, a width of 600 mm and a thickness of 2 mm. These values should be matched to the intended compatible System pro E power enclosure configuration.
Does the ABB 1STQ008337B0000 provide IP65 protection?
The door carries an IP65 designation. Achieving the required IP65 protection in the completed switchboard depends on correct installation with compatible enclosure components, seals and closing arrangements. The final assembly's protection level must be verified as part of the switchboard design.
What does 24 DIN mean in the ABB 1STQ008337B0000 designation?
24 DIN is part of ABB's manufacturer designation for this glazed door configuration. It should be used to identify the intended compatible switchboard arrangement, rather than assumed to specify the number of DIN-rail devices or modules that can be installed.
Does the ABB 1STQ008337B0000 include a complete electrical enclosure?
No. The ABB 1STQ008337B0000 is identified as a glazed door accessory, not a complete electrical switchboard enclosure. The compatible enclosure structure and any required hinges, seals, closing mechanisms or additional accessories should be selected according to ABB documentation and the confirmed product contents.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power enclosure accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB 1STQ008337B0000 provides an IP65-designated glazed door solution for compatible 1800 mm high and 600 mm wide enclosure configurations, supporting equipment visibility and the development of properly specified electrical distribution assemblies.
