1STQ008331B0000 ABB 2 mm IP65 Glazed Door 12 DIN 1800 x 600 mm System Pro E Power

1STQ008331B0000 ABB 2 mm IP65 Glazed Door 12 DIN 1800 x 600 mm System Pro E Power

ABB 1STQ008331B0000 is a 2 mm IP65 glazed door for compatible System Pro E Power low-voltage switchgear enclosure configurations, specified for a 12 DIN arrangement with a nominal height of 1800 mm and width of 600 mm.

SKU: 1STQ008331B0000MPN: 1STQ008331B0000
Price
List Price £1,175.47 ex VAT
Your Price (ex VAT)
£1,175.47
Manufacturer Lead Time Estimated Delivery 5 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £1,175.47
Trade pricing is personalised to your account

Manufacturer Lead Time

£1,175.47

Why Choose the ABB 2 mm IP65 Glazed Door 12 DIN H=1800 W=600?

The ABB 1STQ008331B0000 is a dedicated 2 mm IP65 glazed door from the ABB System Pro E Power low-voltage switchgear enclosure range. Specified for a nominal height of 1800 mm and width of 600 mm, this accessory features a glazed front configuration and is identified for a 12 DIN arrangement within compatible modular electrical distribution enclosures.

As part of the ABB System Pro E Power product group, this glazed door provides electrical panel builders, switchgear manufacturers and installation engineers with a manufacturer-designated enclosure closure component. Its 2 mm specified thickness, IP65 configuration and 1800 × 600 mm nominal size are important selection characteristics for compatible industrial and commercial switchboard installations.

The glazed design provides a viewing area that can allow installed equipment to be observed without opening the enclosure, depending on the final internal arrangement. Identified by ABB order code 1STQ008331B0000, this door is intended for compatible 12 DIN System Pro E Power configurations. The protection level of the completed assembly depends on the correct combination of enclosure components, glazing interfaces, seals, closure hardware and installation procedures.

Key Advantages

  • Dedicated ABB System Pro E Power glazed enclosure door for compatible low-voltage switchgear assemblies.
  • Specified for IP65 enclosure configurations.
  • 2 mm nominal thickness identified in the manufacturer description.
  • 1800 mm nominal height for the designated enclosure arrangement.
  • 600 mm nominal width for compatible modular switchgear sections.
  • Glazed door design provides a viewing area for equipment installed behind the door.
  • Identified for a 12 DIN configuration.
  • Supports visual inspection of suitably positioned equipment without routinely opening the enclosure.
  • Purpose-designed for integration with the ABB System Pro E Power modular switchgear platform.
  • Suitable for professional industrial and commercial electrical distribution board construction.

Key Features

  • ABB System Pro E Power modular switchgear enclosure accessory.
  • 1STQ008331B0000 ABB manufacturer order code.
  • Glazed enclosure door configuration.
  • 2 mm specified thickness.
  • IP65 enclosure protection configuration designation.
  • 1800 mm nominal door height.
  • 600 mm nominal door width.
  • 12 DIN manufacturer configuration designation.
  • Transparent viewing section for compatible equipment arrangements.
  • Designed for compatible System Pro E Power enclosure assemblies.
  • Suitable for modular low-voltage switchgear front closure applications.
  • Compatible hinges, seals, locking arrangements and mounting requirements to be verified against ABB documentation.

IP65 Glazed Door Integration for 12 DIN Switchgear Configurations

The ABB System Pro E Power system provides a modular enclosure platform for constructing professional low-voltage electrical distribution boards. Its range of enclosure accessories supports different front closure arrangements, including solid blind doors and glazed doors intended for compatible equipment configurations.

The ABB 1STQ008331B0000 is specified as a 2 mm glazed door for an IP65 enclosure configuration. Unlike a blind door, a glazed door incorporates a transparent viewing section. This can be useful where operators need to observe compatible indicators, meters or equipment positioned behind the door without opening the enclosure.

The manufacturer description includes the designation 12 DIN. This identifies the intended DIN-related configuration of the door but does not, by itself, establish the number of installed devices, DIN rail dimensions or internal mounting capacity. These details must be checked against the relevant ABB System Pro E Power technical drawings and assembly documentation.

The specified 1800 mm nominal height and 600 mm nominal width help identify the appropriate enclosure arrangement. These dimensions should not automatically be interpreted as the exact external measurements of the door, glazing dimensions or required mounting clearances. The 2 mm thickness is the manufacturer-stated thickness designation and does not independently establish the thickness of the transparent glazing.

The IP65 designation refers to an enclosure protection classification associated with dust-tight protection and resistance to water jets under the applicable test conditions. Achieving this protection level in a completed switchgear assembly requires compatible enclosure components, correctly fitted glazing and seals, appropriate closure hardware and installation in accordance with ABB instructions. The 1STQ008331B0000 is a glazed door accessory rather than a complete switchgear cabinet; the inclusion of hinges, locks, seals and separate mounting hardware must be verified from the manufacturer's documentation.

Typical Applications

  • ABB System Pro E Power low-voltage switchgear enclosures.
  • Compatible IP65 electrical enclosure configurations.
  • 12 DIN modular switchgear arrangements specified by ABB.
  • Industrial electrical distribution board construction.
  • Commercial building power distribution enclosures.
  • Enclosure installations requiring a glazed viewing section.
  • Compatible 1800 × 600 mm nominal door arrangements.
  • Switchboards containing equipment intended for observation through a glazed door.
  • Professional electrical panel building and switchgear manufacturing.
  • Maintenance and replacement of compatible System Pro E Power glazed enclosure doors.

Technical Specifications

Product group System Pro E Power
ABB order code 1STQ008331B0000
Manufacturer description 2MM_IP65 GL.DOOR 12 DIN H=1800 W=600
Product type Glazed enclosure door
Product category Low-voltage switchgear enclosure accessories
Door design Glazed / transparent viewing section
Specified thickness 2 mm
IP configuration IP65
DIN configuration designation 12 DIN
Nominal height 1800 mm
Nominal width 600 mm
Nominal size designation 1800 × 600 mm
Installation system ABB System Pro E Power
Intended mounting location Compatible enclosure door opening
Application Glazed front closure of compatible modular low-voltage switchgear enclosures
Associated hardware As specified in the applicable ABB enclosure assembly instructions

Frequently Asked Questions

What is the ABB 1STQ008331B0000 used for?

The ABB 1STQ008331B0000 is a 2 mm IP65 glazed enclosure door intended for compatible ABB System Pro E Power low-voltage switchgear configurations. It is specified for a 12 DIN arrangement with a nominal door height of 1800 mm and width of 600 mm.

What are the dimensions of the ABB 1STQ008331B0000 glazed door?

The manufacturer specifies a nominal height of 1800 mm, a nominal width of 600 mm and a 2 mm thickness designation. Exact external dimensions, glazing dimensions, hinge positions and mounting clearances should be confirmed using ABB technical drawings.

Does the ABB 1STQ008331B0000 provide IP65 protection?

The door is specified for an IP65 enclosure configuration. Achieving IP65 protection in the completed assembly depends on compatible enclosure components, glazing interfaces, seals, closure hardware and correct installation. The door alone does not guarantee IP65 protection for an incomplete enclosure.

What does 12 DIN mean on the ABB 1STQ008331B0000?

12 DIN is the manufacturer configuration designation included in the product description. It identifies the intended DIN-related arrangement, but the supplied specification does not establish the exact number of DIN rail modules, internal equipment positions or mounting capacity. These details should be verified using ABB System Pro E Power documentation.

Does the ABB 1STQ008331B0000 include hinges, locks and seals?

The supplied manufacturer description identifies the product as a 2 mm IP65 glazed door for a 12 DIN configuration but does not confirm the inclusion of hinges, locks, seals or separate mounting hardware. The supplied components and any additional accessories required for installation should be verified against ABB's official product documentation.

Trusted by Electrical Panel Builders Worldwide

ABB System Pro E Power provides a modular platform for professional low-voltage switchgear construction. The 1STQ008331B0000 glazed door offers a manufacturer-specified 2 mm front closure for compatible 12 DIN, 1800 × 600 mm IP65 enclosure configurations, combining a viewing section with the flexibility of modular electrical distribution board assembly.