Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB System Pro E Power 2 mm thick IP65 glazed enclosure door, order code 1STQ008330B0000, featuring a 48 DIN configuration designation and nominal dimensions of 1800 mm height and 1000 mm width for compatible low-voltage switchboards requiring a transparent viewing area.
£1,495.54
The ABB 1STQ008330B0000 is a 2 mm thick IP65 glazed enclosure door from the ABB System Pro E Power range, designed for compatible low-voltage electrical distribution switchboards. Specified for a 48 DIN configuration, this door has a nominal height of 1800 mm and width of 1000 mm, providing a dedicated glazed access solution for corresponding ABB switchboard assemblies.
Unlike a conventional blind enclosure door, the glazed door design incorporates a transparent viewing area, allowing visual inspection of suitably positioned internal electrical equipment without opening the enclosure. This is particularly useful in distribution assemblies containing DIN-mounted protective devices, control equipment, indication components and other apparatus where routine visual checks are beneficial.
As part of the ABB System Pro E Power modular switchboard system, this glazed door supports coordinated enclosure construction and professional electrical panel building. Its 2 mm specified thickness, 1800 × 1000 mm nominal dimensions, 48 DIN designation and IP65 enclosure application make it a practical choice for compatible industrial, commercial and infrastructure power distribution installations requiring both equipment visibility and environmental protection.
Electrical distribution switchboards often contain circuit protection devices, monitoring equipment and control components that benefit from regular visual inspection. A glazed enclosure door provides a transparent viewing area through which appropriately positioned equipment can be observed while the door remains closed. This arrangement can support routine checks of device indications and equipment status without unnecessary access to the internal switchboard compartment.
The ABB 1STQ008330B0000 combines a 48 DIN configuration designation with a 2 mm thick glazed door for compatible 1800 mm high and 1000 mm wide System Pro E Power assemblies. The door is specified for an IP65 enclosure arrangement, but the final protection rating depends on the complete assembly, including the frame, glazing interfaces, seals, hinges, locks, cable entries and associated enclosure components. The glazed door itself does not independently guarantee IP65 protection. The exact meaning of the 48 DIN designation, the required mounting hardware and the compatible internal equipment layout should be confirmed using the applicable ABB technical documentation.
| Product range | System Pro E Power |
|---|---|
| ABB order code | 1STQ008330B0000 |
| Product description | 2 mm IP65 Glazed Door 48 DIN H1800 W1000 |
| Product type | Switchboard enclosure door |
| Door design | Glazed |
| Viewing arrangement | Transparent viewing area |
| Specified door thickness | 2 mm |
| Nominal door height | 1800 mm |
| Nominal door width | 1000 mm |
| Nominal door dimensions | 1800 × 1000 mm |
| DIN configuration designation | 48 DIN |
| Associated enclosure protection rating | IP65 |
| IP65 protection designation | Dust-tight and protected against water jets when incorporated into a correctly assembled and rated enclosure |
| Installation location | Compatible switchboard front opening |
| System compatibility | ABB System Pro E Power |
| Equipment category | Switchboard enclosure doors and accessories |
| Application | Low-voltage switchboard access, closure and visual equipment inspection |
The ABB 1STQ008330B0000 is a glazed enclosure door designed for compatible ABB System Pro E Power low-voltage switchboards requiring an IP65 enclosure configuration, a 48 DIN designation and nominal door dimensions of 1800 × 1000 mm.
The door has a nominal height of 1800 mm, width of 1000 mm and specified thickness of 2 mm.
A glazed enclosure door incorporates a transparent viewing area that allows suitably positioned internal electrical equipment to be observed while the door remains closed, unlike a solid blind door.
The product specification identifies a 48 DIN configuration associated with this glazed door. The exact DIN arrangement and compatible internal equipment layout should be confirmed against the relevant ABB System Pro E Power assembly documentation.
Yes. The product is specified for compatible IP65 System Pro E Power enclosure configurations. The completed assembly must use the appropriate frame, seals, glazing interfaces and other components to achieve the intended protection rating.
IP65 indicates dust-tight protection and protection against water jets under the applicable IP code test conditions. The rating applies to the correctly assembled enclosure rather than to the glazed door alone.
The transparent viewing area allows visual inspection of suitably positioned equipment while the door remains closed. Actual visibility depends on the internal equipment layout, viewing area and installation arrangement.
The supplied specification identifies the glazed door but does not confirm the inclusion of hinges, locks, seals or other fixing accessories. Required components should be verified against ABB product and assembly documentation.
No. Matching nominal dimensions alone does not establish compatibility. The door is intended for corresponding ABB System Pro E Power configurations, and the enclosure frame, mounting arrangement, glazing clearance and associated hardware must be checked before selection.
The manufacturer's order code is 1STQ008330B0000, identifying the ABB System Pro E Power 2 mm thick IP65 glazed door with a 48 DIN designation, nominal height of 1800 mm and nominal width of 1000 mm.
ABB System Pro E Power glazed enclosure doors and accessories support coordinated low-voltage switchboard construction, helping electrical engineers, panel builders and switchgear manufacturers combine equipment visibility, practical enclosure access and compatible environmental protection arrangements in professionally assembled electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.