Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB System Pro E Power 2 mm thick IP40 overlapping blind enclosure door, order code 1STQ008329B0000, designed for compatible low-voltage switchboard assemblies requiring a solid overlapping closure with nominal dimensions of 1800 mm height and 250 mm width.
£177.96
The ABB 1STQ008329B0000 is a 2 mm thick IP40 overlapping blind door designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. Specified with a nominal height of 1800 mm and width of 250 mm, this solid enclosure door provides a dedicated closure solution for corresponding narrow switchboard sections requiring an overlapping door arrangement.
As part of the ABB System Pro E Power modular switchboard range, this overlapping blind door supports the construction of enclosed electrical distribution equipment by providing an opaque, non-glazed covering for the designated enclosure opening. Its overlapping door configuration is intended to work with the corresponding enclosure frame and adjoining components, helping panel builders achieve a coordinated external finish and appropriate mechanical closure.
The combination of 2 mm specified thickness, 1800 mm nominal height, 250 mm nominal width and IP40 enclosure compatibility makes this ABB door suitable for appropriately configured System Pro E Power switchboards. It is particularly relevant to narrow enclosure sections where a solid front-access door is required for professional electrical distribution assemblies.
Low-voltage switchboard assemblies require properly selected enclosure doors to provide mechanical coverage, controlled access and compatibility with the intended protective arrangement. An overlapping blind door is designed to close against its corresponding enclosure structure using a specified overlapping geometry. This makes correct matching of the door, frame and adjoining enclosure components particularly important when constructing or modifying a switchboard.
The ABB 1STQ008329B0000 is specified for an 1800 mm high and 250 mm wide enclosure opening arrangement within the ABB System Pro E Power range. Its 2 mm thick blind configuration is associated with an IP40 enclosure application. The door alone does not establish an IP40 rating: the completed switchboard must use the correct frame, mounting hardware, adjoining panels and closure components. IP40 does not indicate protection against water ingress, so environmental suitability must be considered when selecting the enclosure for its installation location.
| Product range | System Pro E Power |
|---|---|
| ABB order code | 1STQ008329B0000 |
| Product description | 2 mm IP40 Overlapping Blind Door H1800 W250 |
| Product type | Switchboard enclosure door |
| Door configuration | Overlapping |
| Door design | Blind / solid |
| Specified door thickness | 2 mm |
| Nominal door height | 1800 mm |
| Nominal door width | 250 mm |
| Nominal door dimensions | 1800 × 250 mm |
| Associated enclosure protection rating | IP40 |
| IP40 protection designation | Protection against access and solid foreign objects of 1 mm diameter and greater, without a specified water-ingress protection rating |
| Door type | Opaque, non-glazed enclosure closure |
| System compatibility | ABB System Pro E Power |
| Equipment category | Switchboard enclosure doors and accessories |
| Application | Low-voltage switchboard enclosure access and closure |
The ABB 1STQ008329B0000 is an overlapping blind enclosure door designed for compatible ABB System Pro E Power low-voltage switchboards with an IP40 enclosure configuration and nominal door dimensions of 1800 × 250 mm.
The door has a nominal height of 1800 mm, width of 250 mm and specified thickness of 2 mm.
An overlapping blind door is a solid, opaque enclosure door designed with an overlapping closure arrangement for its corresponding enclosure frame. It does not have a specified transparent viewing window.
Yes. The product is designated for compatible IP40 System Pro E Power enclosure configurations. Achieving the intended rating depends on correct installation with the corresponding enclosure frame and associated components.
IP40 indicates protection against access and solid foreign objects of 1 mm diameter and greater under the applicable IP code requirements. The second digit, zero, means that no water-ingress protection rating is specified.
No. Matching nominal dimensions alone does not confirm compatibility. The door is designed for corresponding ABB System Pro E Power enclosure arrangements, and the frame design, overlapping geometry and mounting hardware must be verified before installation.
The supplied specification identifies the overlapping blind door but does not confirm whether hinges, locks or other fixing accessories are included. Any required components should be checked against the relevant ABB product and assembly documentation.
The door is specified for an IP40 enclosure configuration, which does not provide a rated level of protection against water ingress. Outdoor suitability must not be assumed; the complete enclosure must be selected according to the environmental conditions and required protection rating.
The manufacturer's order code is 1STQ008329B0000, identifying the ABB System Pro E Power 2 mm thick IP40 overlapping blind door with a nominal height of 1800 mm and width of 250 mm.
ABB System Pro E Power enclosure doors and accessories provide coordinated solutions for low-voltage switchboard construction, helping electrical engineers, panel builders and switchgear manufacturers select compatible enclosure components for professionally assembled electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.