Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008325B0000 ABB System pro E Power IP65 Blind Door 2 mm 2000 x 600 mm
ABB 1STQ008325B0000 System pro E Power 2 mm blind door for compatible IP65 low-voltage main distribution board enclosures, with nominal dimensions of 2000 mm high by 600 mm wide.
£795.43
Why Choose the ABB 1STQ008325B0000 System pro E Power IP65 Blind Door?
The ABB 1STQ008325B0000 is a 2 mm blind door designed for compatible ABB System pro E Power low-voltage main distribution board enclosures. Specified for IP65 enclosure configurations, this door has nominal dimensions of 2000 mm high × 600 mm wide, providing a dedicated solid-door solution for professional electrical switchboard construction.
As part of the ABB System pro E Power range, this blind door supports the construction of enclosed electrical distribution assemblies where protection of internal equipment and controlled access are important. Its solid, non-transparent design provides a continuous door surface without a viewing window, making it suitable for compatible switchboard arrangements requiring an opaque front closure.
Identified by ABB manufacturer order code 1STQ008325B0000, this component is intended for professional panel builders, electrical contractors and switchgear manufacturers. Its specified 2 mm thickness, 2000 × 600 mm dimensions and IP65 configuration help simplify selection of the appropriate door for compatible System pro E Power enclosure assemblies.
Key Advantages
- Purpose-designed blind door for ABB System pro E Power distribution boards.
- Specified for IP65 enclosure configurations when correctly assembled with compatible components.
- 2 mm nominal thickness for the designated door component.
- 2000 mm height and 600 mm width for compatible switchboard structures.
- Solid, opaque design provides a non-transparent enclosure closure.
- Supports protection of internal electrical equipment within a correctly assembled enclosure.
- Suitable for industrial and commercial low-voltage electrical distribution applications.
- Genuine ABB component identified by order code 1STQ008325B0000.
Key Features
- ABB System pro E Power main distribution board accessory.
- Blind door configuration without a viewing window.
- 2 mm specified thickness.
- 2000 mm nominal door height.
- 600 mm nominal door width.
- IP65 designated enclosure protection configuration.
- Designed for compatible System pro E Power switchboard structures.
- Provides a solid door surface for enclosed electrical distribution equipment.
- Suitable for professional electrical panel-building and switchgear assembly.
- Supports compatible industrial and commercial enclosure applications.
- ABB manufacturer order code 1STQ008325B0000.
IP65 Enclosure Protection and Solid-Door Construction
The ABB System pro E Power platform supports modular construction of low-voltage main distribution boards using coordinated structural components, enclosure panels, doors and accessories. Selecting the correct door is important for completing the enclosure and achieving the intended access and environmental protection arrangement.
The ABB 1STQ008325B0000 is designated as an IP65 blind door with a specified thickness of 2 mm. Its nominal 2000 × 600 mm format is intended for corresponding System pro E Power enclosure structures, while its solid design provides an opaque closure for the electrical equipment compartment.
An IP65 enclosure classification indicates dust-tight protection and resistance to water jets when the complete enclosure has been correctly designed, assembled and assessed to that rating. The protection level depends on the compatible enclosure structure, door sealing arrangement, hinges, locking hardware, cable entries and installation conditions.
The blind door is an enclosure component rather than a complete IP65 distribution board. Any required hinges, locks, seals or other accessories must be selected according to the applicable ABB assembly documentation. The finished switchboard's ingress protection and electrical performance must be verified as part of the complete installation.
Typical Applications
- ABB System pro E Power main distribution board enclosures.
- Compatible 2000 mm high × 600 mm wide switchboard structures.
- Industrial low-voltage power distribution cabinets.
- Commercial building main electrical distribution systems.
- Electrical switchgear manufacturing and panel-building projects.
- Electrical enclosures requiring a solid, non-transparent door.
- Compatible distribution board assemblies designed for IP65 protection.
- Maintenance and replacement of corresponding ABB enclosure doors.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008325B0000 |
| Product type | Blind enclosure door |
| Product family | Main distribution board doors and enclosure accessories |
| Door design | Solid / blind |
| Specified thickness | 2 mm |
| Nominal height | 2000 mm |
| Nominal width | 600 mm |
| Nominal dimensions (H × W) | 2000 × 600 mm |
| Specified IP configuration | IP65 |
| IP65 dust protection | Dust-tight enclosure classification |
| IP65 water protection | Protection against water jets in a correctly rated complete enclosure |
| Compatible system | ABB System pro E Power |
| Suitable product class | Low-voltage main distribution boards |
| Application | Solid door closure for compatible electrical switchboard enclosures |
| Manufacturer description | 2MM_IP65 BLIND DOOR H=2000 W=600 |
Frequently Asked Questions
What is the ABB 1STQ008325B0000 used for?
The ABB 1STQ008325B0000 is a 2 mm IP65-designated blind door for compatible System pro E Power low-voltage main distribution board enclosures, providing a solid closure for suitable switchboard structures.
What are the dimensions of the ABB 1STQ008325B0000 blind door?
The door has nominal dimensions of 2000 mm in height and 600 mm in width, with a specified thickness of 2 mm.
What does IP65 mean for this ABB blind door?
IP65 indicates dust-tight protection and protection against water jets for a correctly rated complete enclosure. The finished switchboard must use compatible sealing, door hardware and enclosure components to achieve the specified protection level.
Does the ABB 1STQ008325B0000 have a viewing window?
No. The product is specified as a blind door, meaning it has a solid, non-transparent design rather than an integrated viewing window.
Does the ABB 1STQ008325B0000 include a complete switchboard enclosure?
No. The 1STQ008325B0000 is a blind door component for compatible ABB System pro E Power assemblies. The enclosure structure and any required hinges, locking hardware, seals or other installation accessories must be selected according to the complete switchboard configuration.
Designed for Professional Electrical Panel Builders
ABB System pro E Power enclosure components support the construction of modular low-voltage main distribution boards for industrial and commercial applications. The ABB 1STQ008325B0000 provides a dedicated 2 mm blind door solution for compatible 2000 × 600 mm switchboard structures, supporting solid-door enclosure construction and appropriately configured IP65 installations.
