Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008319B0000 System Pro E Power 2 mm solid blind door designed for compatible 1800 mm high and 800 mm wide low-voltage switchgear enclosures with an IP65 protection configuration.
£726.99
The ABB 1STQ008319B0000 is a robust 2 mm blind enclosure door designed for compatible ABB System Pro E Power low-voltage switchgear and electrical distribution cabinets. Specified for IP65 protection configurations, this solid, non-glazed door is designed for an enclosure arrangement with a nominal height of 1800 mm and width of 800 mm, providing a practical solution for protecting electrical equipment against environmental exposure and unauthorised access.
As part of the ABB System Pro E Power range, this blind door supports the construction of professional modular electrical distribution assemblies. Its solid construction provides an opaque enclosure closure, helping protect internal electrical components while maintaining a clean and consistent cabinet appearance. The specified 2 mm thickness makes it suitable for the designated switchgear door configuration.
With a 2 mm specified thickness, 1800 mm nominal height and 800 mm nominal width, the ABB 1STQ008319B0000 is intended for compatible System Pro E Power installations requiring a solid door and IP65 enclosure protection arrangement. When installed with the appropriate enclosure structure, sealing components and compatible accessories, the door supports the construction of electrical cabinets designed to provide protection against dust and water jets.
The ABB 1STQ008319B0000 blind door is designed to form part of a compatible System Pro E Power electrical enclosure requiring an IP65 protection arrangement. Its solid construction provides a physical barrier between the internal switchgear components and the surrounding environment, while the designated enclosure configuration supports protection against dust and water exposure when the complete cabinet is correctly assembled.
Under IEC 60529, an IP65 enclosure is dust-tight and protected against water jets. Achieving this protection level depends on the complete enclosure, including the door, frame, seals, hinges, locking components and any cable entries. The ABB System Pro E Power range provides a modular platform for low-voltage distribution assemblies, allowing panel builders to select suitable components for the required cabinet dimensions and installation environment. The IP65 designation should therefore be considered a characteristic of the correctly configured enclosure assembly rather than an independent rating of the loose door component.
| Series | System Pro E Power |
|---|---|
| Model / order code | 1STQ008319B0000 |
| Product designation | 2MM_IP65 BLIND DOOR H=1800 W=800 |
| Product type | Blind enclosure door |
| Accessory category | Electrical enclosure doors and panels |
| Door design | Solid / blind |
| Viewing window | None |
| Specified thickness | 2 mm |
| Nominal enclosure height | 1800 mm |
| Nominal enclosure width | 800 mm |
| Designated protection rating | IP65 |
| Dust protection designation | Dust-tight enclosure configuration |
| Water protection designation | Protection against water jets in a correctly assembled IP65 enclosure |
| Compatible product family | ABB System Pro E Power |
| Application | Electrical enclosure closure and equipment protection |
| Equipment category | Low-voltage switchgear and distribution enclosure accessories |
| Installation environment | Industrial and commercial electrical distribution cabinets |
| Mounting application | Installation on a compatible modular enclosure structure |
The ABB 1STQ008319B0000 is a solid blind door designed for compatible ABB System Pro E Power low-voltage electrical enclosures. It provides an enclosure closure for a nominal 1800 mm high and 800 mm wide cabinet configuration requiring an IP65 protection arrangement.
The product designation specifies a 2 mm door thickness, 1800 mm nominal enclosure height and 800 mm nominal enclosure width. These values identify the designated enclosure configuration and should not be interpreted as a complete set of measured external door dimensions.
The IP65 designation identifies a protection configuration in which the completed enclosure is dust-tight and protected against water jets in accordance with IEC 60529. The specified protection level depends on correct installation with compatible sealing and enclosure components.
No. The ABB 1STQ008319B0000 is a blind door, meaning it has a solid, non-transparent design without a viewing window. It is intended for enclosure applications where an opaque protective door is required.
The ABB 1STQ008319B0000 may be suitable as a replacement door for compatible ABB System Pro E Power cabinets with the specified 1800 mm height, 800 mm width and IP65 configuration. The enclosure frame, hinge arrangement, locking accessories and sealing requirements should be checked before installation.
ABB System Pro E Power enclosure accessories support electrical panel builders, switchboard manufacturers and industrial engineers in constructing modular low-voltage distribution systems. The ABB 1STQ008319B0000 provides a dedicated 2 mm blind door for compatible 1800 mm high and 800 mm wide IP65 enclosure configurations, supporting professional switchgear assembly and dependable equipment protection.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.