Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB System Pro E Power 2 mm thick IP65 blind enclosure door, order code 1STQ008312B0000, designed for compatible low-voltage switchboard assemblies requiring a solid front-access door with nominal dimensions of 1800 mm height and 1000 mm width.
£817.62
The ABB 1STQ008312B0000 is a 2 mm thick IP65 blind enclosure door from the ABB System Pro E Power range, designed for compatible low-voltage electrical switchboard assemblies. Specified with a nominal height of 1800 mm and width of 1000 mm, this solid door provides a dedicated front-access closure solution for corresponding ABB power distribution enclosures requiring an IP65 protection configuration.
As part of the ABB System Pro E Power modular switchboard system, this blind door supports the construction of enclosed electrical distribution equipment by providing a solid, non-glazed front closure. Its blind configuration is particularly suitable for installations where direct visual inspection of internal equipment through the door is not required, while access to the enclosed components remains necessary for authorised inspection, maintenance and servicing.
With its 2 mm specified thickness, 1800 mm height, 1000 mm width and IP65 enclosure application, the ABB 1STQ008312B0000 provides an application-specific door solution for professional switchboard manufacturers. When correctly installed with the appropriate compatible enclosure components, sealing arrangements and hardware, it helps support the intended environmental protection and mechanical integrity of the completed electrical assembly.
Low-voltage electrical switchboards require appropriately selected enclosure doors to provide access to internal equipment while supporting the environmental protection requirements of the installation. Under the IP code system, IP65 indicates dust-tight protection and protection against water jets when achieved by the complete enclosure. A solid blind door is a practical solution for installations where a continuous opaque closure is preferred over a glazed viewing door.
The ABB 1STQ008312B0000 is designed for compatible 1800 mm high and 1000 mm wide System Pro E Power switchboard configurations. Its 2 mm thick blind construction provides the specified door format for the associated IP65 enclosure arrangement. The door does not independently establish an IP65 rating: final protection depends on the complete enclosure, including the correct door seals, hinges, locking mechanisms, frame interfaces, cable entries and installation methods. Panel builders should confirm the required mounting hardware, opening direction and compatibility with the selected enclosure before installation.
| Product range | System Pro E Power |
|---|---|
| ABB order code | 1STQ008312B0000 |
| Product description | 2 mm IP65 Blind Door H1800 W1000 |
| Product type | Switchboard enclosure door |
| Door configuration | Blind / solid |
| Specified door thickness | 2 mm |
| Nominal door height | 1800 mm |
| Nominal door width | 1000 mm |
| Nominal door dimensions | 1800 × 1000 mm |
| Associated enclosure protection rating | IP65 |
| Protection designation | Dust-tight and protected against water jets when incorporated into a correctly assembled and rated enclosure |
| Door type | Opaque, non-glazed enclosure closure |
| Installation location | Compatible switchboard front opening |
| System compatibility | ABB System Pro E Power |
| Equipment category | Switchboard enclosure doors and accessories |
| Application | Low-voltage electrical distribution enclosure access and closure |
The ABB 1STQ008312B0000 is a solid blind enclosure door designed for compatible ABB System Pro E Power low-voltage switchboards requiring an IP65 enclosure configuration with nominal door dimensions of 1800 × 1000 mm.
The door has a specified nominal height of 1800 mm and width of 1000 mm, with a specified thickness of 2 mm.
The ABB 1STQ008312B0000 has a specified door thickness of 2 mm.
Yes. The product is designated for compatible IP65 System Pro E Power enclosure configurations. The final IP rating depends on correct installation with the appropriate enclosure structure, seals, hardware and other components.
IP65 indicates protection against dust ingress and water jets under the applicable IP code test conditions. The rating applies to the complete correctly assembled enclosure rather than to an individual door in isolation.
A blind switchboard door is a solid, opaque enclosure door without a specified transparent viewing window. It provides a covering for the designated enclosure opening while allowing access when opened using the appropriate hardware.
The supplied product specification identifies the blind door but does not confirm the inclusion of hinges, locks or sealing accessories. Any additional components required for the intended IP65 enclosure assembly should be verified against ABB documentation.
No. Matching nominal dimensions alone does not establish compatibility. The door is intended for corresponding ABB System Pro E Power configurations, and the enclosure frame, mounting arrangement and associated hardware must be checked before selection.
The manufacturer's order code is 1STQ008312B0000, identifying the ABB System Pro E Power 2 mm thick IP65 blind door with a nominal height of 1800 mm and width of 1000 mm.
ABB System Pro E Power enclosure doors and accessories support coordinated low-voltage switchboard construction, helping electrical engineers, panel builders and switchgear manufacturers create compatible, professionally assembled electrical distribution enclosures with appropriate access and environmental protection arrangements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.